Fix up tests

Marlin/src/inc/Conditionals_LCD.h

@@ -490,7 +490,7 @@
 #endif
 
 /**
- * Set a flag for a servo probe
+ * Set a flag for a servo probe (or BLTouch)
  */
 #define HAS_Z_SERVO_PROBE (defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0)
 

buildroot/share/tests/DUE-tests

@@ -37,7 +37,8 @@ exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), EXTENSIBLE_UI, S-Curve, many
 restore_configs
 opt_set MOTHERBOARD BOARD_RADDS
 opt_enable USE_XMAX_PLUG USE_YMAX_PLUG ENDSTOPPULLUPS BLTOUCH AUTO_BED_LEVELING_BILINEAR \
-           Z_MULTI_ENDSTOPS Z_STEPPER_AUTO_ALIGN Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
+           Z_MULTI_ENDSTOPS Z_STEPPER_AUTO_ALIGN Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS \
+           Z_SAFE_HOMING
            #TOUCH_UI_FTDI_EVE LCD_ALEPHOBJECTS_CLCD_UI OTHER_PIN_LAYOUT
 opt_set NUM_Z_STEPPER_DRIVERS 3
 opt_add Z2_MAX_ENDSTOP_INVERTING false

buildroot/share/tests/LPC1769-tests

@@ -49,7 +49,7 @@ opt_set Y_DRIVER_TYPE TMC2130
 opt_set Z_DRIVER_TYPE TMC2130
 opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT \
            TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD \
-           SENSORLESS_PROBING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG
+           SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG
 opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN PSU_CONTROL
 exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING"
 

buildroot/share/tests/megaatmega2560-tests

@@ -108,7 +108,7 @@ opt_set NUM_SERVOS 1
 opt_enable ZONESTAR_LCD Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE BOOT_MARLIN_LOGO_ANIMATED \
            AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL \
            NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
-           PRUSA_MMU2 MMU2_MENUS NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
+           PRUSA_MMU2 MMU2_MENUS NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING
 exec_test $1 $2 "RAMPS | ZONESTAR_LCD | MMU2 | Servo Probe | ABL 3-Pt | Debug Leveling | EEPROM | G38 ..."
 
 #
@@ -182,7 +182,7 @@ opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
            REPRAP_DISCOUNT_SMART_CONTROLLER MENU_ADDAUTOSTART SDSUPPORT SDCARD_SORT_ALPHA \
            ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM \
            FIX_MOUNTED_PROBE AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE FILAMENT_WIDTH_SENSOR \
-           SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
+           Z_SAFE_HOMING SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
            SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT ADVANCED_OK M114_DETAIL \
            VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS EXTRA_FAN_SPEED FWRETRACT
 opt_set FAN_MIN_PWM 50
@@ -345,7 +345,7 @@ exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config"
 use_example_configs SCARA/Morgan
 opt_set LCD_LANGUAGE es
 opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \
-           MKS_12864OLED EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL \
+           MKS_12864OLED EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL Z_SAFE_HOMING \
            STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD SENSORLESS_HOMING SQUARE_WAVE_STEPPING
 opt_set X_MAX_ENDSTOP_INVERTING false
 opt_set X_DRIVER_TYPE TMC2209

buildroot/share/tests/teensy35-tests

@@ -36,7 +36,7 @@ exec_test $1 $2 "Teensy3.5 with many features"
 #
 restore_configs
 opt_set MOTHERBOARD BOARD_TEENSY35_36
-opt_enable EEPROM_SETTINGS Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
+opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
 exec_test $1 $2 "Sled Z Probe with Linear leveling"
 
 #