Add thermistor 15 tuned for JGAurora A5

Marlin/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -1734,9 +1735,9 @@
  * LED Type. Enable only one of the following two options.
  *
  */
-
 //#define RGB_LED
 //#define RGBW_LED
+
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43

Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp

@@ -69,7 +69,7 @@
     uint8_t xon_xoff_state = XON_XOFF_CHAR_SENT | XON_CHAR;
   #endif
 
-  void clear_command_queue(); 
+  void clear_command_queue();
 
   #if ENABLED(SERIAL_STATS_DROPPED_RX)
     uint8_t rx_dropped_bytes = 0;
@@ -391,7 +391,7 @@
     // may be written to rx_buffer_tail, making the buffer appear full rather than empty.
     CRITICAL_SECTION_START;
       rx_buffer.head = rx_buffer.tail = 0;
-      clear_command_queue(); 
+      clear_command_queue();
     CRITICAL_SECTION_END;
 
     #if ENABLED(SERIAL_XON_XOFF)

Marlin/src/config/default/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -1734,9 +1735,9 @@
  * LED Type. Enable only one of the following two options.
  *
  */
-
 //#define RGB_LED
 //#define RGBW_LED
+
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -277,6 +277,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -1729,9 +1730,9 @@
  * LED Type. Enable only one of the following two options.
  *
  */
-
 //#define RGB_LED
 //#define RGBW_LED
+
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -275,6 +275,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -277,6 +277,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

@@ -267,6 +267,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Creality/Ender/Configuration.h

@@ -267,6 +267,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Felix/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -277,6 +277,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/MakerParts/Configuration.h

@@ -287,6 +287,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -1741,9 +1742,9 @@
  * LED Type. Enable only one of the following two options.
  *
  */
-
 //#define RGB_LED
 //#define RGBW_LED
+
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -281,6 +281,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Malyan/M200/Configuration.h

@@ -267,6 +267,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -1707,9 +1708,9 @@
  * LED Type. Enable only one of the following two options.
  *
  */
-
 //#define RGB_LED
 //#define RGBW_LED
+
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -279,6 +279,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/SCARA/Configuration.h

@@ -306,6 +306,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -1737,9 +1738,9 @@
  * LED Type. Enable only one of the following two options.
  *
  */
-
 //#define RGB_LED
 //#define RGBW_LED
+
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/TheBorg/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -1734,9 +1735,9 @@
  * LED Type. Enable only one of the following two options.
  *
  */
-
 //#define RGB_LED
 //#define RGBW_LED
+
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -298,6 +298,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Tronxy/X1/Configuration.h

@@ -267,6 +267,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

@@ -267,6 +267,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -1726,9 +1727,9 @@
  * LED Type. Enable only one of the following two options.
  *
  */
-
 //#define RGB_LED
 //#define RGBW_LED
+
 #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -296,6 +296,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -267,6 +267,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h

@@ -267,6 +267,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -280,6 +280,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -281,6 +281,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/makibox/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/stm32f103ret6/Configuration.h

@@ -248,6 +248,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/config/examples/wt150/Configuration.h

@@ -276,6 +276,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design

Marlin/src/module/thermistor/thermistor_15.h

@@ -0,0 +1,64 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+ // 100k bed thermistor in JGAurora A5. Calibrated by Sam Pinches 21st Jan 2018 using cheap k-type thermocouple inserted into heater block, using TM-902C meter.
+const short temptable_15[][2] PROGMEM = {
+  { OV(  31), 275 },
+  { OV(  33), 270 },
+  { OV(  35), 260 },
+  { OV(  38), 253 },
+  { OV(  41), 248 },
+  { OV( 48), 239 },
+  { OV( 56), 232 },
+  { OV( 66), 222 },
+  { OV( 78), 212 },
+  { OV( 93), 206 },
+  { OV( 106), 199 },
+  { OV( 118), 191 },
+  { OV( 130), 186 },
+  { OV( 158), 176 },
+  { OV( 187), 167 },
+  { OV( 224), 158 },
+  { OV( 270), 148 },
+  { OV( 321),  137 },
+  { OV( 379),  127 },
+  { OV( 446),  117 },
+  { OV( 518),  106 },
+  { OV( 593),  96 },
+  { OV( 668),  86 },
+  { OV( 739),  76 },
+  { OV( 767),  72 },
+  { OV( 830),  62 },
+  { OV( 902),  48 },
+  { OV( 926),  45 },
+  { OV( 955),  35 },
+  { OV( 966),  30 },
+  { OV( 977),  25 },
+  { OV( 985),  20 },
+  { OV( 993),  15 },
+  { OV( 999),  10 },
+  { OV(1004),   5 },
+  { OV(1008),   0 },
+  { OV(1012),  -5 },
+  { OV(1016), -10 },
+  { OV(1020), -15 }
+};

Marlin/src/module/thermistor/thermistors.h

@@ -79,6 +79,9 @@
 #if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1%
   #include "thermistor_13.h"
 #endif
+#if ANY_THERMISTOR_IS(15) // JGAurora A5 thermistor calibration
+  #include "thermistor_15.h"
+#endif
 #if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
   #include "thermistor_20.h"
 #endif