Fix Ender-2 display pins, add BTN_ENC (#16349)

Marlin/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

Marlin/src/inc/Conditionals_LCD.h

   #define IS_RRD_SC
   #define IS_U8GLIB_SSD1306
 
-#elif ENABLED(MKS_MINI_12864)
+#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
 
   #define MINIPANEL
 

Marlin/src/inc/Conditionals_post.h

 #elif ENABLED(MKS_LCD12864B)
   #define _LCD_CONTRAST_MIN  120
   #define _LCD_CONTRAST_INIT 205
-#elif ENABLED(MKS_MINI_12864)
+#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
   #define _LCD_CONTRAST_MIN  120
   #define _LCD_CONTRAST_INIT 195
 #elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)

Marlin/src/inc/SanityCheck.h

   + (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(IS_RRD_FG_SC)) \
   + (ENABLED(ULTRA_LCD) && DISABLED(IS_ULTRA_LCD)) \
   + (ENABLED(U8GLIB_SSD1306) && DISABLED(IS_U8GLIB_SSD1306)) \
-  + (ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)) \
+  + (ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864, ENDER2_STOCKDISPLAY)) \
   + (ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(IS_RRW_KEYPAD)) \
   + (ENABLED(EXTENSIBLE_UI) && DISABLED(IS_EXTUI)) \
   + (ENABLED(ULTIPANEL) && DISABLED(IS_ULTIPANEL)) \
   + ENABLED(LCD_FOR_MELZI) \
   + ENABLED(ULTI_CONTROLLER) \
   + ENABLED(MKS_MINI_12864) \
+  + ENABLED(ENDER2_STOCKDISPLAY) \
   + ENABLED(FYSETC_MINI_12864_X_X) \
   + ENABLED(FYSETC_MINI_12864_1_2) \
   + ENABLED(FYSETC_MINI_12864_2_0) \

Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp

 static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
   U8G_ESC_ADR(0),             // instruction mode
   U8G_ESC_CS(1),              // enable chip
-  #if ENABLED(MKS_MINI_12864)
+  #if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
     UC1701_START_LINE(0),     // set display start line to 0
     UC1701_ADC_REVERSE(0),    // ADC set to reverse
     UC1701_OUT_MODE(1),       // common output mode

Marlin/src/lcd/dogm/ultralcd_DOGM.h

 
   #define U8G_CLASS U8GLIB_MINI12864_2X_HAL                     // 4 stripes
 
-#elif ENABLED(MKS_MINI_12864)
+#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
 
   // The MKS_MINI_12864 V1/V2 aren't exact copies of the MiniPanel.
   // Panel management is in u8g_dev_uc1701_mini12864_HAL.cpp with

Marlin/src/pins/linux/pins_RAMPS_LINUX.h

       #define SD_DETECT_PIN     49
       #define KILL_PIN          41
 
-    #elif ENABLED(MKS_MINI_12864)   // Added in Marlin 1.1.6
+    #elif ENABLED(MKS_MINI_12864)
 
       #define DOGLCD_A0         27
       #define DOGLCD_CS         25

Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h

 // requires jumpers on the SKR V1.1 board as documented here:
 // https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
 #ifndef SDCARD_CONNECTION
-  #if ENABLED(MKS_MINI_12864)
+  #if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
     #define SDCARD_CONNECTION LCD
   #else
     #define SDCARD_CONNECTION ONBOARD

Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h

     #else // !FYSETC_MINI_12864
 
       #if ENABLED(MKS_MINI_12864)
+
         #define DOGLCD_CS    P1_21
         #define DOGLCD_A0    P1_22
         #define DOGLCD_SCK   P0_15
         #define DOGLCD_MOSI  P0_18
+
+      #elif ENABLED(ENDER2_STOCKDISPLAY)
+
+        /**
+         * Creality Ender-2 display pinout
+         *                   _____
+         *               5V | · · | GND
+         *     (MOSI) P1_23 | · · | P1_22 (LCD_CS)
+         *   (LCD_A0) P1_21 | · · | P1_20 (BTN_EN2)
+         *      RESET P1.19 | · · | P1_18 (BTN_EN1)
+         *  (BTN_ENC) P0_28 | · · | P1_30 (SCK)
+         *                   -----
+         *                    EXP1
+         */
+
+        #define BTN_EN1      P1_18
+        #define BTN_EN2      P1_20
+        #define BTN_ENC      P0_28
+        #define DOGLCD_CS    P1_22
+        #define DOGLCD_A0    P1_21
+        #define DOGLCD_SCK   P1_30
+        #define DOGLCD_MOSI  P1_23
         #define FORCE_SOFT_SPI
+        #define LCD_BACKLIGHT_PIN -1
       #endif
 
       #if ENABLED(ULTIPANEL)

Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h

 
 #include "pins_MELZI.h"
 
-// For the stock CR-10 use the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-//   option for the display in Configuration.h
-
+//
+// For the stock CR-10 enable CR10_STOCKDISPLAY in Configuration.h
+//
 #undef LCD_SDSS
 #undef LED_PIN
 #undef LCD_PINS_RS

Marlin/src/pins/stm32/pins_BTT_SKR_E3_DIP.h

     #define LCD_PINS_ENABLE PB7
     #define LCD_PINS_D4    PB9
 
-  #elif ENABLED(MKS_MINI_12864)
+  #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
 
     /** Creality Ender-2 display pinout
      *                   _____

Marlin/src/pins/stm32/pins_BTT_SKR_MINI_E3.h

     #define LCD_PINS_D7    PB5
     #define ADC_KEYPAD_PIN PA1    // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
 
-  #elif ENABLED(MKS_MINI_12864)
+  #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
 
     /** Creality Ender-2 display pinout
      *                   _____
 
   #else
 
-    #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_MINI_E3."
+    #error "Only ZONESTAR_LCD, MKS_MINI_12864, ENDER2_STOCKDISPLAY, and CR10_STOCKDISPLAY are currently supported on the BIGTREE_SKR_MINI_E3."
 
   #endif
 

Marlin/src/pins/stm32/pins_MKS_ROBIN_PRO.h

     #define DOGLCD_SCK     PB13
     #define DOGLCD_MOSI    PB15
 
-  #else // !MKS_MINI_12864
+  #else // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY
 
     #define LCD_PINS_D4    PF14
     #if ENABLED(ULTIPANEL)
       #define LCD_PINS_D7  PF13
     #endif
 
-  #endif // !MKS_MINI_12864
+  #endif // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY
 #endif
 
 #ifndef ST7920_DELAY_1

config/default/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/3DFabXYZ/Migbot/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/ADIMLab/Gantry v1/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/ADIMLab/Gantry v2/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/AlephObjects/TAZ4/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Alfawise/U20-bltouch/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Alfawise/U20/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/AliExpress/CL-260/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/AliExpress/UM2pExt/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Anet/A2/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Anet/A2plus/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Anet/A6/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Anet/A8/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Anet/A8plus/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Anet/E10/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Anet/E16/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/AnyCubic/i3/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/ArmEd/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Artillery/Genius/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Artillery/Sidewinder X1/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Azteeg/X5GT/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/BIBO/TouchX/cyclops/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/BIBO/TouchX/default/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/BQ/Hephestos/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/BQ/Hephestos_2/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/BQ/WITBOX/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h

 #define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h

 #define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Cartesio/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/CR-10/Configuration.h

 #define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/CR-10S/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/CR-10_5S/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/CR-10mini/Configuration.h

 #define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/CR-20 Pro/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/CR-20/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/CR-8/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/Ender-2/Configuration.h

 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
-#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
+#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
 // MKS MINI12864 with graphic controller and SD support
 // https://reprap.org/wiki/MKS_MINI_12864
 //
-#define MKS_MINI_12864
+//#define MKS_MINI_12864
 
 //
 // FYSETC variant of the MINI12864 graphic controller with SD support
 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/Ender-3/Configuration.h

 #define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/Ender-4/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/Ender-5 Pro/Configuration.h

 #define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Creality/Ender-5/Configuration.h

 #define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Dagoma/Disco Ultimate/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/EXP3D/Imprimante multifonction/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Einstart-S/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/FYSETC/AIO_II/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/FYSETC/Cheetah 1.2/base/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/FYSETC/Cheetah/BLTouch/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/FYSETC/Cheetah/base/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/FYSETC/F6_13/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/FYSETC/S6/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Felix/DUAL/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Felix/Single/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/FlashForge/CreatorPro/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/FolgerTech/i3-2020/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Formbot/Raptor/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Formbot/T_Rex_2+/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Formbot/T_Rex_3/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/A10/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/A10D/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/A10M/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/A10T/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/A20/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/A20M/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/A20T/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/A30/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/D200/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/E180/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/GT2560/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/M201/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/MeCreator2/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/PI3A PRO/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/HMS434/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Infitary/i3-M508/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/JGAurora/A1/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/JGAurora/A5/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/JGAurora/A5S/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/JGAurora/Magic/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/MakerFarm/Pegasus_12/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/MakerParts/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6

config/examples/Malyan/M150/Configuration.h

 //#define CR10_STOCKDISPLAY
 
 //
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
+//
 // ANET and Tronxy Graphical Controller
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6