Concise SD_REPRINT_LAST_SELECTED_FILE description

Marlin/Configuration.h

@@ -1618,7 +1618,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/default/Configuration.h

@@ -854,7 +854,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1618,7 +1618,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/default/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -874,7 +874,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1638,7 +1638,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -854,7 +854,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1618,7 +1618,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -973,7 +973,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1777,7 +1777,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -860,7 +860,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1626,7 +1626,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -845,7 +845,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1609,7 +1609,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -1619,7 +1619,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -567,11 +567,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -845,7 +845,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1609,7 +1609,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -853,7 +853,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1617,7 +1617,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -864,7 +864,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1628,7 +1628,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Felix/Configuration.h

@@ -836,7 +836,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1600,7 +1600,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -836,7 +836,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1600,7 +1600,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -851,7 +851,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1615,7 +1615,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -869,7 +869,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1633,7 +1633,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -854,7 +854,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1618,7 +1618,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -858,7 +858,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1622,7 +1622,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -878,7 +878,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1646,7 +1646,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -564,11 +564,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -858,7 +858,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1622,7 +1622,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

@@ -858,7 +858,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1622,7 +1622,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -571,11 +571,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -856,7 +856,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1594,7 +1594,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -854,7 +854,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1618,7 +1618,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -1618,7 +1618,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/SCARA/Configuration.h

@@ -1630,7 +1630,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -1649,7 +1649,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -559,11 +559,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -1674,7 +1674,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -1653,7 +1653,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -578,11 +578,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -1618,7 +1618,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -1618,7 +1618,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -854,7 +854,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1618,7 +1618,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -978,7 +978,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1746,7 +1746,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -572,11 +572,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -978,7 +978,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1739,7 +1739,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -572,11 +572,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -965,7 +965,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1734,7 +1734,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -572,11 +572,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -1737,7 +1737,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -572,11 +572,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -968,7 +968,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1737,7 +1737,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -577,11 +577,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -977,7 +977,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1746,7 +1746,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -572,11 +572,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -868,7 +868,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1632,7 +1632,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/makibox/Configuration.h

@@ -857,7 +857,7 @@
  * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  *   A comprehensive bed leveling system combining the features and benefits
  *   of other systems. UBL also includes integrated Mesh Generation, Mesh
- *   Validation and Mesh Editing systems. 
+ *   Validation and Mesh Editing systems.
  *
  * - MESH_BED_LEVELING
  *   Probe a grid manually
@@ -1621,7 +1621,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/stm32f103ret6/Configuration.h

@@ -1621,7 +1621,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -1613,7 +1613,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 

Marlin/src/config/examples/wt150/Configuration.h

@@ -1623,7 +1623,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -570,11 +570,9 @@
   //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
 
   /**
-   * This option allows you to easily reprint the same SD Card file as
-   * was last printed.  At the end of a print, the LCD Menu will jump
-   * straight to the file previously selected.  A single click of the encoder
-   * wheel will restart the print.  Another file or LCD option can be
-   * selected by using the encoder wheel to navigate through the menu structure.
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE