Configuration for Aurora Z605

Still not fine tuned but working.

Marlin/Configuration.h

@@ -27,7 +27,7 @@
 #define STRING_VERSION "v1.0.2"
 #define STRING_URL "reprap.org"
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(roglio, Aurora Z605)" // Who made the changes.
 #define STRING_SPLASH STRING_VERSION " - " STRING_URL // will be shown during bootup
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
@@ -36,7 +36,8 @@
 #define SERIAL_PORT 0
 
 // This determines the communication speed of the printer
-#define BAUDRATE 250000
+//#define BAUDRATE 250000
+#define BAUDRATE 115200
 
 // This enables the serial port associated to the Bluetooth interface
 //#define BTENABLED              // Enable BT interface on AT90USB devices
@@ -44,11 +45,11 @@
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_ULTIMAKER
+  #define MOTHERBOARD BOARD_MELZI_1284
 #endif
 
 // Define this to set a custom name for your generic Mendel,
-// #define CUSTOM_MENDEL_NAME "This Mendel"
+#define CUSTOM_MENDEL_NAME "Aurora Z605"
 
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
@@ -104,10 +105,10 @@
 // 147 is Pt100 with 4k7 pullup
 // 110 is Pt100 with 1k pullup (non standard)
 
-#define TEMP_SENSOR_0 -1
+#define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 -1
-#define TEMP_SENSOR_2 0
-#define TEMP_SENSOR_BED 0
+#define TEMP_SENSOR_2 -1
+#define TEMP_SENSOR_BED 1
 
 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT
@@ -319,10 +320,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #define DISABLE_E false // For all extruders
 #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
 
-#define INVERT_X_DIR true    // for Mendel set to false, for Orca set to true
+#define INVERT_X_DIR false    // for Mendel set to false, for Orca set to true
 #define INVERT_Y_DIR false    // for Mendel set to true, for Orca set to false
-#define INVERT_Z_DIR true     // for Mendel set to false, for Orca set to true
-#define INVERT_E0_DIR false   // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_Z_DIR false     // for Mendel set to false, for Orca set to true
+#define INVERT_E0_DIR true   // for direct drive extruder v9 set to true, for geared extruder set to false
 #define INVERT_E1_DIR false    // for direct drive extruder v9 set to true, for geared extruder set to false
 #define INVERT_E2_DIR false   // for direct drive extruder v9 set to true, for geared extruder set to false
 
@@ -481,12 +482,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 // default settings
 
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {78.7402,78.7402,200.0*8/3,760*1.1}  // default steps per unit for Ultimaker
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 25}    // (mm/sec)
-#define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
-
-#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E max acceleration in mm/s^2 for printing moves
-#define DEFAULT_RETRACT_ACCELERATION  3000   // X, Y, Z and E max acceleration in mm/s^2 for retracts
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {78.7402, 78.7402, 200.0*8/3, 760*1.1}  // default steps per unit for Ultimaker
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {44.3090, 22.1545, 1600, 53.5} // rigidbot values
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {85.3333, 85.3333, 2560, 158.8308} // geeetech values
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {85.3333, 85.3333, 200.0*8/3, 158.8308}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {98.5000, 98.5000, 397.8000, 158.8308}
+//#define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 25}    // (mm/sec) marlin default
+#define DEFAULT_MAX_FEEDRATE          {400, 400, 2, 45}    // (mm/sec) geeetech values
+//#define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
+#define DEFAULT_MAX_ACCELERATION      {5000,5000,50,5000}    // geeetech values
+
+//#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E max acceleration in mm/s^2 for printing moves
+//#define DEFAULT_RETRACT_ACCELERATION  3000    // X, Y, Z and E max acceleration in mm/s^2 for retracts
+#define DEFAULT_ACCELERATION          1000    // geeetech values
+#define DEFAULT_RETRACT_ACCELERATION  2000    // geeetech values
 
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
@@ -525,11 +534,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 // Preheat Constants
 #define PLA_PREHEAT_HOTEND_TEMP 180
-#define PLA_PREHEAT_HPB_TEMP 70
+#define PLA_PREHEAT_HPB_TEMP 45
 #define PLA_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
-#define ABS_PREHEAT_HOTEND_TEMP 240
-#define ABS_PREHEAT_HPB_TEMP 100
+#define ABS_PREHEAT_HOTEND_TEMP 200
+#define ABS_PREHEAT_HPB_TEMP 70
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
 //LCD and SD support
@@ -561,7 +570,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
 // ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 
 // The RepRapWorld REPRAPWORLD_KEYPAD v1.1
 // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626