Optimize G-code / feature dependencies (#18919)

Marlin/src/MarlinCore.cpp

@@ -189,7 +189,7 @@
   #include "feature/leds/tempstat.h"
 #endif
 
-#if HAS_CASE_LIGHT
+#if ENABLED(CASE_LIGHT_ENABLE)
   #include "feature/caselight.h"
 #endif
 
@@ -1082,11 +1082,11 @@ void setup() {
     OUT_WRITE(STAT_LED_BLUE_PIN, LOW); // OFF
   #endif
 
-  #if HAS_CASE_LIGHT
+  #if ENABLED(CASE_LIGHT_ENABLE)
     #if DISABLED(CASE_LIGHT_USE_NEOPIXEL)
       if (PWM_PIN(CASE_LIGHT_PIN)) SET_PWM(CASE_LIGHT_PIN); else SET_OUTPUT(CASE_LIGHT_PIN);
     #endif
-    SETUP_RUN(update_case_light());
+    SETUP_RUN(caselight.update_brightness());
   #endif
 
   #if ENABLED(MK2_MULTIPLEXER)

Marlin/src/feature/binary_protocol.cpp → Marlin/src/feature/binary_stream.cpp

@@ -25,7 +25,7 @@
 #if ENABLED(BINARY_FILE_TRANSFER)
 
 #include "../sd/cardreader.h"
-#include "binary_protocol.h"
+#include "binary_stream.h"
 
 char* SDFileTransferProtocol::Packet::Open::data = nullptr;
 size_t SDFileTransferProtocol::data_waiting, SDFileTransferProtocol::transfer_timeout, SDFileTransferProtocol::idle_timeout;
@@ -33,4 +33,4 @@ bool SDFileTransferProtocol::transfer_active, SDFileTransferProtocol::dummy_tran
 
 BinaryStream binaryStream[NUM_SERIAL];
 
-#endif // BINARY_FILE_TRANSFER
+#endif

Marlin/src/feature/caselight.cpp

@@ -22,14 +22,17 @@
 
 #include "../inc/MarlinConfig.h"
 
-#if HAS_CASE_LIGHT
+#if ENABLED(CASE_LIGHT_ENABLE)
 
-uint8_t case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS;
-bool case_light_on = CASE_LIGHT_DEFAULT_ON;
+#include "caselight.h"
+
+CaseLight caselight;
+
+uint8_t CaseLight::brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS;
+bool CaseLight::on = CASE_LIGHT_DEFAULT_ON;
 
 #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
-  #include "leds/leds.h"
-  LEDColor case_light_color =
+  LEDColor CaseLight::color =
     #ifdef CASE_LIGHT_NEOPIXEL_COLOR
       CASE_LIGHT_NEOPIXEL_COLOR
     #else
@@ -38,34 +41,33 @@ bool case_light_on = CASE_LIGHT_DEFAULT_ON;
   ;
 #endif
 
-/**
- * The following are needed because ARM chips ignore a "WRITE(CASE_LIGHT_PIN,x)" command to the pins that
- * are directly controlled by the PWM module. In order to turn them off the brightness level needs to be
- * set to off.  Since we can't use the pwm register to save the last brightness level we need a variable
- * to save it.
- */
-uint8_t case_light_brightness_sav;   // saves brighness info so can restore when "M355 S1" received
-bool case_light_arg_flag;  // flag to notify if S or P argument type
-
 #ifndef INVERT_CASE_LIGHT
   #define INVERT_CASE_LIGHT false
 #endif
 
-void update_case_light() {
+void CaseLight::update(const bool sflag) {
+  /**
+   * The brightness_sav (and sflag) is needed because ARM chips ignore
+   * a "WRITE(CASE_LIGHT_PIN,x)" command to the pins that are directly
+   * controlled by the PWM module. In order to turn them off the brightness
+   * level needs to be set to OFF. Since we can't use the PWM register to
+   * save the last brightness level we need a variable to save it.
+   */
+  static uint8_t brightness_sav;  // Save brightness info for restore on "M355 S1"
 
-  if (!(case_light_arg_flag && !case_light_on))
-    case_light_brightness_sav = case_light_brightness;  // save brightness except if this is an S0 argument
-  if (case_light_arg_flag && case_light_on)
-    case_light_brightness = case_light_brightness_sav;  // restore last brightens if this is an S1 argument
+  if (on || !sflag)
+    brightness_sav = brightness;  // Save brightness except for M355 S0
+  if (sflag && on)
+    brightness = brightness_sav;  // Restore last brightness for M355 S1
 
   #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) || DISABLED(CASE_LIGHT_NO_BRIGHTNESS)
-    const uint8_t i = case_light_on ? case_light_brightness : 0, n10ct = INVERT_CASE_LIGHT ? 255 - i : i;
+    const uint8_t i = on ? brightness : 0, n10ct = INVERT_CASE_LIGHT ? 255 - i : i;
   #endif
 
   #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
 
     leds.set_color(
-      MakeLEDColor(case_light_color.r, case_light_color.g, case_light_color.b, case_light_color.w, n10ct),
+      MakeLEDColor(color.r, color.g, color.b, color.w, n10ct),
       false
     );
 
@@ -83,11 +85,11 @@ void update_case_light() {
       else
     #endif
       {
-        const bool s = case_light_on ? !INVERT_CASE_LIGHT : INVERT_CASE_LIGHT;
+        const bool s = on ? !INVERT_CASE_LIGHT : INVERT_CASE_LIGHT;
         WRITE(CASE_LIGHT_PIN, s ? HIGH : LOW);
       }
 
   #endif // !CASE_LIGHT_USE_NEOPIXEL
 }
 
-#endif // HAS_CASE_LIGHT
+#endif // CASE_LIGHT_ENABLE

Marlin/src/feature/caselight.h

@@ -21,9 +21,25 @@
  */
 #pragma once
 
-extern uint8_t case_light_brightness;
-extern bool case_light_on;
-extern uint8_t case_light_brightness_sav;   // saves brighness info when case_light_on is false
-extern bool case_light_arg_flag;  // flag to notify if S or P argument type
+#include "../inc/MarlinConfigPre.h"
 
-void update_case_light();
+#if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+  #include "leds/leds.h"
+#endif
+
+class CaseLight {
+public:
+  static uint8_t brightness;
+  static bool on;
+
+  static void update(const bool sflag);
+  static inline void update_brightness() { update(false); }
+  static inline void update_enabled() { update(true); }
+
+private:
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    static LEDColor color;
+  #endif
+};
+
+extern CaseLight caselight;

Marlin/src/feature/e_parser.cpp

@@ -21,7 +21,7 @@
  */
 
 /**
- * emergency_parser.cpp - Intercept special commands directly in the serial stream
+ * e_parser.cpp - Intercept special commands directly in the serial stream
  */
 
 #include "../inc/MarlinConfigPre.h"

Marlin/src/feature/e_parser.h

@@ -22,7 +22,7 @@
 #pragma once
 
 /**
- * emergency_parser.h - Intercept special commands directly in the serial stream
+ * e_parser.h - Intercept special commands directly in the serial stream
  */
 
 #include "../inc/MarlinConfigPre.h"

Marlin/src/gcode/feature/caselight/M355.cpp

@@ -20,45 +20,47 @@
  *
  */
 
-#include "../../gcode.h"
-
 #include "../../../inc/MarlinConfig.h"
 
-#if HAS_CASE_LIGHT
-  #include "../../../feature/caselight.h"
+#if ENABLED(CASE_LIGHT_ENABLE)
 
-  /**
-   * M355: Turn case light on/off and set brightness
-   *
-   *   P<byte>  Set case light brightness (PWM pin required - ignored otherwise)
-   *
-   *   S<bool>  Set case light on/off
-   *
-   *   When S turns on the light on a PWM pin then the current brightness level is used/restored
-   *
-   *   M355 P200 S0 turns off the light & sets the brightness level
-   *   M355 S1 turns on the light with a brightness of 200 (assuming a PWM pin)
-   */
-  void GcodeSuite::M355() {
-    uint8_t args = 0;
-    if (parser.seenval('P')) {
-      ++args, case_light_brightness = parser.value_byte();
-      case_light_arg_flag = false;
-    }
-    if (parser.seenval('S')) {
-      ++args, case_light_on = parser.value_bool();
-      case_light_arg_flag = true;
-    }
-    if (args) update_case_light();
+#include "../../../feature/caselight.h"
+#include "../../gcode.h"
 
-    // always report case light status
-    SERIAL_ECHO_START();
-    if (!case_light_on) {
-      SERIAL_ECHOLNPGM("Case light: off");
-    }
-    else {
-      if (!PWM_PIN(CASE_LIGHT_PIN)) SERIAL_ECHOLNPGM("Case light: on");
-      else SERIAL_ECHOLNPAIR("Case light: ", case_light_brightness);
-    }
+/**
+ * M355: Turn case light on/off and set brightness
+ *
+ *   P<byte>  Set case light brightness (PWM pin required - ignored otherwise)
+ *
+ *   S<bool>  Set case light on/off
+ *
+ *   When S turns on the light on a PWM pin then the current brightness level is used/restored
+ *
+ *   M355 P200 S0 turns off the light & sets the brightness level
+ *   M355 S1 turns on the light with a brightness of 200 (assuming a PWM pin)
+ */
+void GcodeSuite::M355() {
+  bool didset = false;
+  if (parser.seenval('P')) {
+    didset = true;
+    caselight.brightness = parser.value_byte();
+  }
+  const bool sflag = parser.seenval('S');
+  if (sflag) {
+    didset = true;
+    caselight.on = parser.value_bool();
   }
-#endif // HAS_CASE_LIGHT
+  if (didset) caselight.update(sflag);
+
+  // Always report case light status
+  SERIAL_ECHO_START();
+  SERIAL_ECHOPGM("Case light: ");
+  if (!caselight.on)
+    SERIAL_ECHOLNPGM(STR_OFF);
+  else {
+    if (!PWM_PIN(CASE_LIGHT_PIN)) SERIAL_ECHOLNPGM(STR_ON);
+    else SERIAL_ECHOLN(int(caselight.brightness));
+  }
+}
+
+#endif // CASE_LIGHT_ENABLE

Marlin/src/gcode/gcode.cpp

@@ -842,7 +842,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 351: M351(); break;                                  // M351: Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
       #endif
 
-      #if HAS_CASE_LIGHT
+      #if ENABLED(CASE_LIGHT_ENABLE)
         case 355: M355(); break;                                  // M355: Set case light brightness
       #endif
 

Marlin/src/gcode/gcode.h

@@ -702,7 +702,7 @@ private:
     static void M351();
   #endif
 
-  TERN_(HAS_CASE_LIGHT, static void M355());
+  TERN_(CASE_LIGHT_ENABLE, static void M355());
 
   TERN_(REPETIER_GCODE_M360, static void M360());
 
@@ -845,7 +845,7 @@ private:
   TERN_(MAGNETIC_PARKING_EXTRUDER, static void M951());
 
   TERN_(TOUCH_SCREEN_CALIBRATION, static void M995());
-  
+
   TERN_(PLATFORM_M997_SUPPORT, static void M997());
 
   static void M999();

Marlin/src/gcode/host/M115.cpp

@@ -93,8 +93,8 @@ void GcodeSuite::M115() {
     cap_line(PSTR("SOFTWARE_POWER"), ENABLED(PSU_CONTROL));
 
     // TOGGLE_LIGHTS (M355)
-    cap_line(PSTR("TOGGLE_LIGHTS"), ENABLED(HAS_CASE_LIGHT));
-    cap_line(PSTR("CASE_LIGHT_BRIGHTNESS"), TERN0(HAS_CASE_LIGHT, PWM_PIN(CASE_LIGHT_PIN)));
+    cap_line(PSTR("TOGGLE_LIGHTS"), ENABLED(CASE_LIGHT_ENABLE));
+    cap_line(PSTR("CASE_LIGHT_BRIGHTNESS"), TERN0(CASE_LIGHT_ENABLE, PWM_PIN(CASE_LIGHT_PIN)));
 
     // EMERGENCY_PARSER (M108, M112, M410, M876)
     cap_line(PSTR("EMERGENCY_PARSER"), ENABLED(EMERGENCY_PARSER));

Marlin/src/gcode/queue.cpp

@@ -40,7 +40,7 @@ GCodeQueue queue;
 #endif
 
 #if ENABLED(BINARY_FILE_TRANSFER)
-  #include "../feature/binary_protocol.h"
+  #include "../feature/binary_stream.h"
 #endif
 
 #if ENABLED(POWER_LOSS_RECOVERY)
@@ -628,11 +628,10 @@ void GCodeQueue::advance() {
           #if ENABLED(SERIAL_STATS_DROPPED_RX)
             SERIAL_ECHOLNPAIR("Dropped bytes: ", MYSERIAL0.dropped());
           #endif
-
           #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
             SERIAL_ECHOLNPAIR("Max RX Queue Size: ", MYSERIAL0.rxMaxEnqueued());
           #endif
-        #endif //  !defined(__AVR__) || !defined(USBCON)
+        #endif
 
         ok_to_send();
       }

Marlin/src/inc/Conditionals_LCD.h

@@ -430,14 +430,6 @@
   #endif
 #endif
 
-#if ENABLED(SR_LCD_3W_NL)
-  // Feature checks for SR_LCD_3W_NL
-#elif EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008)
-  #define USES_LIQUIDTWI2
-#elif ANY(HAS_CHARACTER_LCD, LCD_I2C_TYPE_PCF8575, LCD_I2C_TYPE_PCA8574, SR_LCD_2W_NL, LCM1602)
-  #define USES_LIQUIDCRYSTAL
-#endif
-
 #if ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS)
   #define HAS_LCD_MENU 1
 #endif
@@ -774,10 +766,3 @@
 #ifndef EXTRUDE_MINTEMP
   #define EXTRUDE_MINTEMP 170
 #endif
-
-/**
- * To check if we need the folder src/features/leds
- */
-#if ANY(TEMP_STAT_LEDS, HAS_COLOR_LEDS, HAS_CASE_LIGHT, PRINTER_EVENT_LEDS, LED_BACKLIGHT_TIMEOUT, PCA9632_BUZZER, LED_CONTROL_MENU, NEOPIXEL_LED)
-  #define HAS_LED_FEATURE 1
-#endif

Marlin/src/inc/Conditionals_post.h

@@ -1944,9 +1944,6 @@
 #if PIN_EXISTS(PHOTOGRAPH)
   #define HAS_PHOTOGRAPH 1
 #endif
-#if PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE)
-  #define HAS_CASE_LIGHT 1
-#endif
 
 // Digital control
 #if PIN_EXISTS(STEPPER_RESET)
@@ -2223,7 +2220,7 @@
 /**
  * MIN/MAX case light PWM scaling
  */
-#if HAS_CASE_LIGHT
+#if ENABLED(CASE_LIGHT_ENABLE)
   #ifndef CASE_LIGHT_MAX_PWM
     #define CASE_LIGHT_MAX_PWM 255
   #elif !WITHIN(CASE_LIGHT_MAX_PWM, 1, 255)

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp

@@ -38,7 +38,7 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
   }
 
     #ifdef TOUCH_UI_PORTRAIT
-      #if EITHER(HAS_CASE_LIGHT, SENSORLESS_HOMING)
+      #if EITHER(CASE_LIGHT_ENABLE, SENSORLESS_HOMING)
         #define GRID_ROWS 9
       #else
         #define GRID_ROWS 8
@@ -59,7 +59,7 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
       #define BACKLASH_POS            BTN_POS(2,7), BTN_SIZE(1,1)
       #define CASE_LIGHT_POS          BTN_POS(1,8), BTN_SIZE(1,1)
       #define TMC_HOMING_THRS_POS     BTN_POS(2,8), BTN_SIZE(1,1)
-      #if EITHER(HAS_CASE_LIGHT, SENSORLESS_HOMING)
+      #if EITHER(CASE_LIGHT_ENABLE, SENSORLESS_HOMING)
         #define BACK_POS              BTN_POS(1,9), BTN_SIZE(2,1)
       #else
         #define BACK_POS              BTN_POS(1,8), BTN_SIZE(2,1)
@@ -91,7 +91,7 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
        .font(Theme::font_medium)
       .enabled(ENABLED(HAS_BED_PROBE))
       .tag(2) .button( ZPROBE_ZOFFSET_POS,     GET_TEXT_F(MSG_ZPROBE_ZOFFSET))
-      .enabled(ENABLED(HAS_CASE_LIGHT))
+      .enabled(ENABLED(CASE_LIGHT_ENABLE))
       .tag(16).button( CASE_LIGHT_POS,         GET_TEXT_F(MSG_CASE_LIGHT))
       .tag(3) .button( STEPS_PER_MM_POS,       GET_TEXT_F(MSG_STEPS_PER_MM))
       .enabled(ENABLED(HAS_TRINAMIC_CONFIG))
@@ -149,7 +149,7 @@ bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) {
     case 14: GOTO_SCREEN(StepperBumpSensitivityScreen); break;
     #endif
     case 15: GOTO_SCREEN(DisplayTuningScreen); break;
-    #if HAS_CASE_LIGHT
+    #if ENABLED(CASE_LIGHT_ENABLE)
     case 16: GOTO_SCREEN(CaseLightScreen); break;
     #endif
     default: return false;

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp

@@ -137,7 +137,7 @@ bool MainMenu::onTouchEnd(uint8_t tag) {
     case 4:  GOTO_SCREEN(MoveAxisScreen);                             break;
     case 5:  injectCommands_P(PSTR("M84"));                           break;
     case 6:  GOTO_SCREEN(TemperatureScreen);                          break;
-    #if BOTH(TOUCH_UI_COCOA_PRESS, HAS_CASE_LIGHT)
+    #if BOTH(TOUCH_UI_COCOA_PRESS, CASE_LIGHT_ENABLE)
     case 7:  GOTO_SCREEN(CaseLightScreen);                            break;
     #else
     case 7:  GOTO_SCREEN(ChangeFilamentScreen);                       break;

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.cpp

@@ -83,7 +83,7 @@ SCREEN_TABLE {
 #else
   DECL_SCREEN(JerkScreen),
 #endif
-#if HAS_CASE_LIGHT
+#if ENABLED(CASE_LIGHT_ENABLE)
   DECL_SCREEN(CaseLightScreen),
 #endif
 #if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.h

@@ -63,7 +63,7 @@ enum {
 #else
   JERK_SCREEN_CACHE,
 #endif
-#if HAS_CASE_LIGHT
+#if ENABLED(CASE_LIGHT_ENABLE)
   CASE_LIGHT_SCREEN_CACHE,
 #endif
 #if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
@@ -579,7 +579,7 @@ class DefaultAccelerationScreen : public BaseNumericAdjustmentScreen, public Cac
   };
 #endif
 
-#if HAS_CASE_LIGHT
+#if ENABLED(CASE_LIGHT_ENABLE)
   class CaseLightScreen : public BaseNumericAdjustmentScreen, public CachedScreen<CASE_LIGHT_SCREEN_CACHE> {
     public:
       static void onRedraw(draw_mode_t);

Marlin/src/lcd/extui/ui_api.cpp

@@ -599,18 +599,18 @@ namespace ExtUI {
     #endif
   #endif
 
-  #if HAS_CASE_LIGHT
-    bool getCaseLightState()                 { return case_light_on; }
+  #if ENABLED(CASE_LIGHT_ENABLE)
+    bool getCaseLightState()                 { return caselight.on; }
     void setCaseLightState(const bool value) {
-      case_light_on = value;
-      update_case_light();
+      caselight.on = value;
+      caselight.update_enabled();
     }
 
     #if DISABLED(CASE_LIGHT_NO_BRIGHTNESS)
-      float getCaseLightBrightness_percent()                 { return ui8_to_percent(case_light_brightness); }
+      float getCaseLightBrightness_percent()                 { return ui8_to_percent(caselight.brightness); }
       void setCaseLightBrightness_percent(const float value) {
-         case_light_brightness = map(constrain(value, 0, 100), 0, 100, 0, 255);
-         update_case_light();
+         caselight.brightness = map(constrain(value, 0, 100), 0, 100, 0, 255);
+         caselight.update_brightness();
       }
     #endif
   #endif

Marlin/src/lcd/menu/menu_led.cpp

@@ -76,8 +76,8 @@
     void menu_case_light() {
       START_MENU();
       BACK_ITEM(MSG_CONFIGURATION);
-      EDIT_ITEM(percent, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true);
-      EDIT_ITEM(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
+      EDIT_ITEM(percent, MSG_CASE_LIGHT_BRIGHTNESS, &caselight.brightness, 0, 255, caselight.update_brightness, true);
+      EDIT_ITEM(bool, MSG_CASE_LIGHT, (bool*)&caselight.on, caselight.update_enabled);
       END_MENU();
     }
   #endif
@@ -97,7 +97,7 @@ void menu_led() {
     #endif
     SUBMENU(MSG_CUSTOM_LEDS, menu_led_custom);
   #endif
-   //
+  //
   // Set Case light on/off/brightness
   //
   #if ENABLED(CASE_LIGHT_MENU)
@@ -106,7 +106,7 @@ void menu_led() {
         SUBMENU(MSG_CASE_LIGHT, menu_case_light);
       else
     #endif
-        EDIT_ITEM(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
+        EDIT_ITEM(bool, MSG_CASE_LIGHT, (bool*)&caselight.on, caselight.update_enabled);
   #endif
   END_MENU();
 }

Marlin/src/libs/heatshrink/heatshrink_decoder.cpp

@@ -1,9 +1,36 @@
 /**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(BINARY_FILE_TRANSFER)
+
+/**
  * libs/heatshrink/heatshrink_decoder.cpp
  */
+#include "heatshrink_decoder.h"
+
 #include <stdlib.h>
 #include <string.h>
-#include "heatshrink_decoder.h"
 
 #pragma GCC optimize ("O3")
 
@@ -353,3 +380,5 @@ static void push_byte(heatshrink_decoder *hsd, output_info *oi, uint8_t byte) {
   oi->buf[(*oi->output_size)++] = byte;
   (void)hsd;
 }
+
+#endif // BINARY_FILE_TRANSFER

Marlin/src/libs/heatshrink/heatshrink_decoder.h

@@ -1,13 +1,36 @@
 /**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
  * libs/heatshrink/heatshrink_decoder.h
  */
 #pragma once
 
-#include <stdint.h>
-#include <stddef.h>
 #include "heatshrink_common.h"
 #include "heatshrink_config.h"
 
+#include <stdint.h>
+#include <stddef.h>
+
 typedef enum {
   HSDR_SINK_OK,               /* data sunk, ready to poll */
   HSDR_SINK_FULL,             /* out of space in internal buffer */

Marlin/src/module/configuration_store.cpp

@@ -404,7 +404,7 @@ typedef struct SettingsDataStruct {
   // HAS_CASE_LIGHT_BRIGHTNESS
   //
   #if HAS_CASE_LIGHT_BRIGHTNESS
-    uint8_t case_light_brightness;
+    uint8_t caselight_brightness;                        // M355 P
   #endif
 
   //
@@ -465,7 +465,7 @@ void MarlinSettings::postprocess() {
 
   TERN_(HAS_LINEAR_E_JERK, planner.recalculate_max_e_jerk());
 
-  TERN_(HAS_CASE_LIGHT_BRIGHTNESS, update_case_light());
+  TERN_(HAS_CASE_LIGHT_BRIGHTNESS, caselight.update_brightness());
 
   // Refresh steps_to_mm with the reciprocal of axis_steps_per_mm
   // and init stepper.count[], planner.position[] with current_position
@@ -1342,7 +1342,7 @@ void MarlinSettings::postprocess() {
     // Case Light Brightness
     //
     #if HAS_CASE_LIGHT_BRIGHTNESS
-      EEPROM_WRITE(case_light_brightness);
+      EEPROM_WRITE(caselight.brightness);
     #endif
 
     //
@@ -2181,8 +2181,8 @@ void MarlinSettings::postprocess() {
       // Case Light Brightness
       //
       #if HAS_CASE_LIGHT_BRIGHTNESS
-        _FIELD_TEST(case_light_brightness);
-        EEPROM_READ(case_light_brightness);
+        _FIELD_TEST(caselight_brightness);
+        EEPROM_READ(caselight.brightness);
       #endif
 
       //
@@ -2493,7 +2493,7 @@ void MarlinSettings::reset() {
   //
   // Case Light Brightness
   //
-  TERN_(HAS_CASE_LIGHT_BRIGHTNESS, case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS);
+  TERN_(HAS_CASE_LIGHT_BRIGHTNESS, caselight.brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS);
 
   //
   // TOUCH_SCREEN_CALIBRATION

buildroot/share/PlatformIO/scripts/common-dependencies.h

@@ -65,3 +65,91 @@
 #ifdef HAL_PATH
   #include HAL_PATH(../../../../Marlin/src/HAL, inc/Conditionals_post.h)
 #endif
+
+//
+// Conditionals only used for [features]
+//
+#if ENABLED(SR_LCD_3W_NL)
+  // Feature checks for SR_LCD_3W_NL
+#elif EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008)
+  #define USES_LIQUIDTWI2
+#elif ANY(HAS_CHARACTER_LCD, LCD_I2C_TYPE_PCF8575, LCD_I2C_TYPE_PCA8574, SR_LCD_2W_NL, LCM1602)
+  #define USES_LIQUIDCRYSTAL
+#endif
+
+#if BOTH(ANYCUBIC_LCD_I3MEGA, EXTENSIBLE_UI)
+  #define HAS_ANYCUBIC_TFT_EXTUI
+#endif
+
+#if SAVED_POSITIONS
+  #define HAS_SAVED_POSITIONS
+#endif
+
+#if ENABLED(HOST_PROMPT_SUPPORT) && DISABLED(EMERGENCY_PARSER)
+  #define HAS_GCODE_M876
+#endif
+
+#if PREHEAT_COUNT
+  #define HAS_PREHEAT_COUNT
+#endif
+
+#if EXTRUDERS
+  #define HAS_EXTRUDERS
+  #if EXTRUDERS > 1
+    #define HAS_MULTI_EXTRUDER
+  #endif
+#endif
+
+#if HAS_LCD_MENU
+  #if ENABLED(BACKLASH_GCODE)
+    #define HAS_MENU_BACKLASH
+  #endif
+  #if ENABLED(LEVEL_BED_CORNERS)
+    #define HAS_MENU_BED_CORNERS
+  #endif
+  #if ENABLED(CANCEL_OBJECTS)
+    #define HAS_MENU_CANCELOBJECT
+  #endif
+  #if ENABLED(CUSTOM_USER_MENUS)
+    #define HAS_MENU_CUSTOM
+  #endif
+  #if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION)
+    #define HAS_MENU_DELTA_CALIBRATE
+  #endif
+  #if EITHER(LED_CONTROL_MENU, CASE_LIGHT_MENU)
+    #define HAS_MENU_LED
+  #endif
+  #if ENABLED(ADVANCED_PAUSE_FEATURE)
+    #define HAS_MENU_FILAMENT
+  #endif
+  #if ENABLED(SDSUPPORT)
+    #define HAS_MENU_MEDIA
+  #endif
+  #if ENABLED(MIXING_EXTRUDER)
+    #define HAS_MENU_MIXER
+  #endif
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    #define HAS_MENU_JOB_RECOVERY
+  #endif
+  #if HAS_POWER_MONITOR
+    #define HAS_MENU_POWER_MONITOR
+  #endif
+  #if HAS_CUTTER
+    #define HAS_MENU_CUTTER
+  #endif
+  #if HAS_TEMPERATURE
+    #define HAS_MENU_TEMPERATURE
+  #endif
+  #if ENABLED(MMU2_MENUS)
+    #define HAS_MENU_MMU2
+  #endif
+  #if HAS_TRINAMIC_CONFIG
+    #define HAS_MENU_TMC
+  #endif
+  #if ENABLED(TOUCH_SCREEN_CALIBRATION)
+    #define HAS_MENU_TOUCH_SCREEN
+  #endif
+  #if ENABLED(AUTO_BED_LEVELING_UBL)
+    #define HAS_MENU_UBL
+  #endif
+#endif

buildroot/share/PlatformIO/scripts/common-dependencies.py

@@ -6,41 +6,56 @@ import subprocess
 import os
 import re
 try:
-    import configparser
+	import configparser
 except ImportError:
-    import ConfigParser as configparser
+	import ConfigParser as configparser
 from platformio.managers.package import PackageManager
 
 Import("env")
 
-FEATURE_DEPENDENCIES = {}
+FEATURE_CONFIG = {}
+
+def add_to_feat_cnf(feature, flines):
+	feat = FEATURE_CONFIG[feature]
+	atoms = re.sub(',\\s*', '\n', flines).strip().split('\n')
+	for dep in atoms:
+		parts = dep.split('=')
+		name = parts.pop(0)
+		rest = '='.join(parts)
+		if name in ['extra_scripts', 'src_filter', 'lib_ignore']:
+			feat[name] = rest
+		else:
+			feat['lib_deps'] += [dep]
 
 def load_config():
 	config = configparser.ConfigParser()
 	config.read("platformio.ini")
 	items = config.items('features')
 	for key in items:
-		ukey = key[0].upper()
-		if not ukey in FEATURE_DEPENDENCIES:
-			FEATURE_DEPENDENCIES[ukey] = {
-				'lib_deps': []
-			}
-		deps = re.sub(',\\s*', '\n', key[1]).strip().split('\n')
-		for dep in deps:
-			parts = dep.split('=')
-			name = parts.pop(0)
-			rest = '='.join(parts)
-			if name in ['extra_scripts', 'src_filter', 'lib_ignore']:
-				FEATURE_DEPENDENCIES[ukey][name] = rest
-			else:
-				FEATURE_DEPENDENCIES[ukey]['lib_deps'] += [dep]
+		feature = key[0].upper()
+		if not feature in FEATURE_CONFIG:
+			FEATURE_CONFIG[feature] = { 'lib_deps': [] }
+		add_to_feat_cnf(feature, key[1])
+
+	# Add options matching marlin.MY_OPTION to the pile
+	all_opts = env.GetProjectOptions()
+	for n in all_opts:
+		mat = re.match(r'marlin\.(.+)', n[0])
+		if mat:
+			try:
+				val = env.GetProjectOption(n[0])
+			except:
+				val = None
+			if val:
+				add_to_feat_cnf(mat.group(1).upper(), val)
 
 def get_all_known_libs():
 	known_libs = []
-	for feature in FEATURE_DEPENDENCIES:
-		if not 'lib_deps' in FEATURE_DEPENDENCIES[feature]:
+	for feature in FEATURE_CONFIG:
+		feat = FEATURE_CONFIG[feature]
+		if not 'lib_deps' in feat:
 			continue
-		for dep in FEATURE_DEPENDENCIES[feature]['lib_deps']:
+		for dep in feat['lib_deps']:
 			name, _, _ = PackageManager.parse_pkg_uri(dep)
 			known_libs.append(name)
 	return known_libs
@@ -64,21 +79,23 @@ def force_ignore_unused_libs():
 	known_libs = get_all_known_libs()
 	diff = (list(set(known_libs) - set(env_libs)))
 	lib_ignore = env.GetProjectOption('lib_ignore') + diff
-	print("Ignoring libs:", lib_ignore)
+	print("Ignore libraries:", lib_ignore)
 	set_env_field('lib_ignore', lib_ignore)
 
-def install_features_dependencies():
+def apply_features_config():
 	load_config()
-	for feature in FEATURE_DEPENDENCIES:
+	for feature in FEATURE_CONFIG:
 		if not env.MarlinFeatureIsEnabled(feature):
 			continue
 
-		if 'lib_deps' in FEATURE_DEPENDENCIES[feature]:
+		feat = FEATURE_CONFIG[feature]
+
+		if 'lib_deps' in feat and len(feat['lib_deps']):
 			print("Adding lib_deps for %s... " % feature)
 
-			# deps to add
+			# feat to add
 			deps_to_add = {}
-			for dep in FEATURE_DEPENDENCIES[feature]['lib_deps']:
+			for dep in feat['lib_deps']:
 				name, _, _ = PackageManager.parse_pkg_uri(dep)
 				deps_to_add[name] = dep
 
@@ -101,27 +118,27 @@ def install_features_dependencies():
 				# Only add the missing dependencies
 				set_env_field('lib_deps', deps + list(deps_to_add.values()))
 
-		if 'extra_scripts' in FEATURE_DEPENDENCIES[feature]:
-			print("Executing extra_scripts for %s... " % feature)
-			env.SConscript(FEATURE_DEPENDENCIES[feature]['extra_scripts'], exports="env")
+		if 'extra_scripts' in feat:
+			print("Running extra_scripts for %s... " % feature)
+			env.SConscript(feat['extra_scripts'], exports="env")
 
-		if 'src_filter' in FEATURE_DEPENDENCIES[feature]:
+		if 'src_filter' in feat:
 			print("Adding src_filter for %s... " % feature)
 			src_filter = ' '.join(env.GetProjectOption('src_filter'))
 			# first we need to remove the references to the same folder
-			my_srcs = re.findall( r'[+-](<.*?>)', FEATURE_DEPENDENCIES[feature]['src_filter'])
+			my_srcs = re.findall( r'[+-](<.*?>)', feat['src_filter'])
 			cur_srcs = re.findall( r'[+-](<.*?>)', src_filter)
 			for d in my_srcs:
 				if d in cur_srcs:
 					src_filter = re.sub(r'[+-]' + d, '', src_filter)
 
-			src_filter = FEATURE_DEPENDENCIES[feature]['src_filter'] + ' ' + src_filter
+			src_filter = feat['src_filter'] + ' ' + src_filter
 			set_env_field('src_filter', [src_filter])
 			env.Replace(SRC_FILTER=src_filter)
 
-		if 'lib_ignore' in FEATURE_DEPENDENCIES[feature]:
-			print("Ignoring libs for %s... " % feature)
-			lib_ignore = env.GetProjectOption('lib_ignore') + [FEATURE_DEPENDENCIES[feature]['lib_ignore']]
+		if 'lib_ignore' in feat:
+			print("Adding lib_ignore for %s... " % feature)
+			lib_ignore = env.GetProjectOption('lib_ignore') + [feat['lib_ignore']]
 			set_env_field('lib_ignore', lib_ignore)
 
 #
@@ -170,7 +187,7 @@ def search_compiler():
 # Use the compiler to get a list of all enabled features
 #
 def load_marlin_features():
-	if "MARLIN_FEATURES" in env:
+	if 'MARLIN_FEATURES' in env:
 		return
 
 	# Process defines
@@ -199,16 +216,27 @@ def load_marlin_features():
 		feature = define[8:].strip().decode().split(' ')
 		feature, definition = feature[0], ' '.join(feature[1:])
 		marlin_features[feature] = definition
-	env["MARLIN_FEATURES"] = marlin_features
+	env['MARLIN_FEATURES'] = marlin_features
 
 #
 # Return True if a matching feature is enabled
 #
 def MarlinFeatureIsEnabled(env, feature):
 	load_marlin_features()
-	r = re.compile(feature)
-	matches = list(filter(r.match, env["MARLIN_FEATURES"]))
-	return len(matches) > 0
+	r = re.compile('^' + feature + '$')
+	found = list(filter(r.match, env['MARLIN_FEATURES']))
+
+	# Defines could still be 'false' or '0', so check
+	some_on = False
+	if len(found):
+		for f in found:
+			val = env['MARLIN_FEATURES'][f]
+			if val in [ '', '1', 'true' ]:
+				some_on = True
+			elif val in env['MARLIN_FEATURES']:
+				some_on = env.MarlinFeatureIsEnabled(val)
+
+	return some_on
 
 #
 # Add a method for other PIO scripts to query enabled features
@@ -218,5 +246,5 @@ env.AddMethod(MarlinFeatureIsEnabled)
 #
 # Add dependencies for enabled Marlin features
 #
-install_features_dependencies()
+apply_features_config()
 force_ignore_unused_libs()

platformio.ini

@@ -26,15 +26,160 @@ include_dir  = Marlin
 #
 [common]
 default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-  -<src/lcd/HD44780> -<src/lcd/dwin> -<src/lcd/dogm> -<src/lcd/tft> -<src/lcd/menu>
-  -<src/lcd/extui/lib/mks_ui> -<src/lcd/extui/lib/dgus> -<src/lcd/extui/lib/ftdi_eve_touch_ui> -<src/lcd/extui/lib/anycubic>
+  -<src/lcd/HD44780> -<src/lcd/dwin> -<src/lcd/dogm> -<src/lcd/tft>
+  -<src/lcd/menu>
+  -<src/lcd/menu/game/game.cpp> -<src/lcd/menu/game/brickout.cpp> -<src/lcd/menu/game/invaders.cpp>
+  -<src/lcd/menu/game/maze.cpp> -<src/lcd/menu/game/snake.cpp>
+  -<src/lcd/menu/menu_backlash.cpp>
+  -<src/lcd/menu/menu_bed_corners.cpp>
+  -<src/lcd/menu/menu_bed_leveling.cpp>
+  -<src/lcd/menu/menu_cancelobject.cpp>
+  -<src/lcd/menu/menu_delta_calibrate.cpp>
+  -<src/lcd/menu/menu_filament.cpp>
+  -<src/lcd/menu/menu_info.cpp>
+  -<src/lcd/menu/menu_job_recovery.cpp>
+  -<src/lcd/menu/menu_led.cpp>
+  -<src/lcd/menu/menu_media.cpp>
+  -<src/lcd/menu/menu_mmu2.cpp>
+  -<src/lcd/menu/menu_power_monitor.cpp>
+  -<src/lcd/menu/menu_spindle_laser.cpp>
+  -<src/lcd/menu/menu_temperature.cpp>
+  -<src/lcd/menu/menu_tmc.cpp>
+  -<src/lcd/menu/menu_touch_screen.cpp>
+  -<src/lcd/menu/menu_ubl.cpp>
+  -<src/lcd/extui/lib/mks_ui>
+  -<src/lcd/extui/lib/dgus> -<src/lcd/extui_dgus_lcd.cpp>
+  -<src/lcd/extui_example.cpp>
+  -<src/lcd/extui_malyan_lcd.cpp>
+  -<src/lcd/extui/lib/ftdi_eve_touch_ui>
+  -<src/lcd/extui/lib/anycubic_i3mega>
+  -<src/lcd/extui_anycubic_tft.cpp>
+  -<src/lcd/lcdprint.cpp>
   -<src/sd/usb_flashdrive>
-  -<src/gcode/feature/trinamic>
+  -<src/feature/backlash.cpp>
+  -<src/feature/baricuda.cpp> -<src/gcode/feature/baricuda>
   -<src/feature/bedlevel/abl> -<src/gcode/bedlevel/abl>
   -<src/feature/bedlevel/mbl> -<src/gcode/bedlevel/mbl>
   -<src/feature/bedlevel/ubl> -<src/gcode/bedlevel/ubl>
+  -<src/feature/binary_stream.cpp> -<src/libs/heatshrink>
+  -<src/feature/bltouch.cpp>
+  -<src/feature/cancel_object.cpp> -<src/gcode/feature/cancel>
+  -<src/feature/caselight> -<src/gcode/feature/caselight>
+  -<src/feature/closedloop.cpp>
+  -<src/feature/controllerfan.cpp> -<src/gcode/feature/controllerfan>
   -<src/feature/dac> -<src/feature/digipot>
-  -<src/feature/leds>
+  -<src/feature/direct_stepping.cpp> -<src/gcode/motion/G6.cpp>
+  -<src/feature/e_parser.cpp>
+  -<src/feature/encoder_i2c.cpp>
+  -<src/feature/fanmux.cpp>
+  -<src/feature/filwidth.cpp> -<src/gcode/feature/filwidth>
+  -<src/feature/fwretract.cpp> -<src/gcode/feature/fwretract>
+  -<src/feature/host_actions.cpp>
+  -<src/feature/hotend_idle.cpp>
+  -<src/feature/joystick.cpp>
+  -<src/feature/leds/blinkm.cpp>
+  -<src/feature/leds/leds.cpp>
+  -<src/feature/leds/pca9533.cpp>
+  -<src/feature/leds/pca9632.cpp>
+  -<src/feature/leds/printer_event_leds.cpp>
+  -<src/feature/leds/tempstat.cpp>
+  -<src/feature/max7219.cpp>
+  -<src/feature/mixing.cpp>
+  -<src/feature/mmu2> -<src/gcode/feature/prusa_MMU2>
+  -<src/feature/pause.cpp>
+  -<src/feature/power.cpp>
+  -<src/feature/power_monitor.cpp> -<src/gcode/feature/power_monitor>
+  -<src/feature/powerloss.cpp> -<src/gcode/feature/powerloss>
+  -<src/feature/probe_temp_comp.cpp>
+  -<src/feature/runout.cpp> -<src/gcode/feature/runout>
+  -<src/feature/snmm.cpp>
+  -<src/feature/solenoid.cpp>
+  -<src/feature/spindle_laser.cpp> -<src/gcode/control/M3-M5.cpp>
+  -<src/feature/tmc_util.cpp> -<src/module/stepper/trinamic.cpp>
+  -<src/feature/twibus.cpp>
+  -<src/feature/z_stepper_align.cpp>
+  -<src/gcode/bedlevel/G26.cpp>
+  -<src/gcode/bedlevel/G35.cpp>
+  -<src/gcode/bedlevel/G42.cpp>
+  -<src/gcode/bedlevel/M420.cpp>
+  -<src/gcode/calibrate/G33.cpp>
+  -<src/gcode/calibrate/G34_M422.cpp>
+  -<src/gcode/calibrate/G76_M871.cpp>
+  -<src/gcode/calibrate/G425.cpp>
+  -<src/gcode/calibrate/M12.cpp>
+  -<src/gcode/calibrate/M48.cpp>
+  -<src/gcode/calibrate/M100.cpp>
+  -<src/gcode/calibrate/M425.cpp>
+  -<src/gcode/calibrate/M666.cpp>
+  -<src/gcode/calibrate/M852.cpp>
+  -<src/gcode/config/M43.cpp>
+  -<src/gcode/config/M217.cpp>
+  -<src/gcode/config/M218.cpp>
+  -<src/gcode/config/M221.cpp>
+  -<src/gcode/config/M281.cpp>
+  -<src/gcode/config/M302.cpp>
+  -<src/gcode/config/M305.cpp>
+  -<src/gcode/config/M540.cpp>
+  -<src/gcode/control/M7-M9.cpp>
+  -<src/gcode/control/M211.cpp>
+  -<src/gcode/control/M605.cpp>
+  -<src/gcode/feature/advance>
+  -<src/gcode/feature/camera>
+  -<src/gcode/feature/i2c>
+  -<src/gcode/feature/L6470>
+  -<src/gcode/feature/leds/M150.cpp>
+  -<src/gcode/feature/leds/M7219.cpp>
+  -<src/gcode/feature/macro>
+  -<src/gcode/feature/mixing/M163-M165.cpp>
+  -<src/gcode/feature/mixing/M166.cpp>
+  -<src/gcode/feature/pause/G27.cpp>
+  -<src/gcode/feature/pause/G60.cpp>
+  -<src/gcode/feature/pause/G61.cpp>
+  -<src/gcode/feature/pause/M125.cpp>
+  -<src/gcode/feature/pause/M600.cpp>
+  -<src/gcode/feature/pause/M603.cpp>
+  -<src/gcode/feature/pause/M701_M702.cpp>
+  -<src/gcode/feature/trinamic/M122.cpp>
+  -<src/gcode/feature/trinamic/M569.cpp>
+  -<src/gcode/feature/trinamic/M906.cpp>
+  -<src/gcode/feature/trinamic/M911-M914.cpp>
+  -<src/gcode/geometry/G17-G19.cpp>
+  -<src/gcode/geometry/G53-G59.cpp>
+  -<src/gcode/geometry/M206_M428.cpp>
+  -<src/gcode/host/M16.cpp>
+  -<src/gcode/host/M113.cpp>
+  -<src/gcode/host/M360.cpp>
+  -<src/gcode/host/M876.cpp>
+  -<src/gcode/lcd/M0_M1.cpp>
+  -<src/gcode/lcd/M145.cpp>
+  -<src/gcode/lcd/M250.cpp>
+  -<src/gcode/lcd/M73.cpp>
+  -<src/gcode/lcd/M995.cpp>
+  -<src/gcode/motion/G2_G3.cpp>
+  -<src/gcode/motion/G5.cpp>
+  -<src/gcode/motion/G80.cpp>
+  -<src/gcode/motion/M290.cpp>
+  -<src/gcode/probe/G30.cpp>
+  -<src/gcode/probe/G31_G32.cpp>
+  -<src/gcode/probe/G38.cpp>
+  -<src/gcode/probe/M401_M402.cpp>
+  -<src/gcode/probe/M851.cpp>
+  -<src/gcode/probe/M951.cpp>
+  -<src/gcode/scara>
+  -<src/gcode/sd>
+  -<src/gcode/temp/M104_M109.cpp>
+  -<src/gcode/units/G20_G21.cpp>
+  -<src/gcode/units/M149.cpp>
+  -<src/libs/L64XX> -<src/module/stepper/L64xx.cpp>
+  -<src/libs/hex_print.cpp>
+  -<src/libs/least_squares_fit.cpp>
+  -<src/libs/nozzle.cpp> -<src/gcode/feature/clean>
+  -<src/module/delta.cpp>
+  -<src/module/planner_bezier.cpp>
+  -<src/module/printcounter.cpp>
+  -<src/module/probe.cpp>
+  -<src/module/scara.cpp> -<src/gcode/calibrate/M665.cpp>
+  -<src/module/stepper/TMC26X.cpp>
 extra_scripts      =
   pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
   pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
@@ -49,12 +194,17 @@ HAS_TFT_LVGL_UI         = lvgl=https://github.com/makerbase-mks/MKS-LittlevGL/ar
                           src_filter=+<src/lcd/extui/lib/mks_ui>
                           extra_scripts=download_mks_assets.py
 HAS_TRINAMIC_CONFIG     = TMCStepper@~0.7.1
-                          src_filter=+<src/gcode/feature/trinamic>
+                          src_filter=+<src/feature/tmc_util.cpp> +<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp>
+HAS_STEALTHCHOP         = src_filter=+<src/gcode/feature/trinamic/M569.cpp>
 SR_LCD_3W_NL            = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
-DIGIPOT_MCP4...         = SlowSoftI2CMaster
+HAS_I2C_DIGIPOT         = SlowSoftI2CMaster
+                          src_filter=+<src/feature/digipot>
 HAS_TMC26X              = TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+                          src_filter=+<src/module/TMC26X.cpp>
 HAS_L64XX               = Arduino-L6470@0.8.0
+                          src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470>
 NEOPIXEL_LED            = Adafruit NeoPixel@1.5.0
+                          src_filter=+<src/feature/leds/neopixel.cpp>
 MAX6675_IS_MAX31865     = Adafruit MAX31865 library@~1.1.0
 HAS_GRAPHICAL_LCD       = U8glib-HAL@0.4.1
                           src_filter=+<src/lcd/dogm>
@@ -64,17 +214,143 @@ DWIN_CREALITY_LCD       = src_filter=+<src/lcd/dwin>
 HAS_CHARACTER_LCD       = src_filter=+<src/lcd/HD44780>
 HAS_GRAPHICAL_TFT       = src_filter=+<src/lcd/tft>
 HAS_LCD_MENU            = src_filter=+<src/lcd/menu>
-HAS_DGUS_LCD            = src_filter=+<src/lcd/extui/lib/dgus>
-TOUCH_UI_FTDI_EVE       = src_filter=+<src/lcd/extui/lib/ftdi_eve_touch_ui>
+HAS_GAMES               = src_filter=+<src/lcd/menu/game/game.cpp>
+MARLIN_BRICKOUT         = src_filter=+<src/lcd/menu/game/brickout.cpp>
+MARLIN_INVADERS         = src_filter=+<src/lcd/menu/game/invaders.cpp>
+MARLIN_MAZE             = src_filter=+<src/lcd/menu/game/maze.cpp>
+MARLIN_SNAKE            = src_filter=+<src/lcd/menu/game/snake.cpp>
+HAS_MENU_BACKLASH       = src_filter=+<src/lcd/menu/menu_backlash.cpp>
+HAS_MENU_BED_CORNERS    = src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
+LCD_BED_LEVELING        = src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
+HAS_MENU_CANCELOBJECT   = src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
+HAS_MENU_DELTA_CALIBRATE = src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
+HAS_MENU_FILAMENT       = src_filter=+<src/lcd/menu/menu_filament.cpp>
+LCD_INFO_MENU           = src_filter=+<src/lcd/menu/menu_info.cpp>
+HAS_MENU_JOB_RECOVERY   = src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
+HAS_MENU_LED            = src_filter=+<src/lcd/menu/menu_led.cpp>
+HAS_MENU_MEDIA          = src_filter=+<src/lcd/menu/menu_media.cpp>
+HAS_MENU_MIXER          = src_filter=+<src/lcd/menu/menu_mixer.cpp>
+HAS_MENU_MMU2           = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
+HAS_MENU_POWER_MONITOR  = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
+HAS_MENU_CUTTER         = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
+HAS_MENU_TEMPERATURE    = src_filter=+<src/lcd/menu/menu_temperature.cpp>
+HAS_MENU_TMC            = src_filter=+<src/lcd/menu/menu_tmc.cpp>
+HAS_MENU_TOUCH_SCREEN   = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
+HAS_MENU_UBL            = src_filter=+<src/lcd/menu/menu_ubl.cpp>
 ANYCUBIC_LCD_I3MEGA     = src_filter=+<src/lcd/extui/lib/anycubic_i3mega>
+HAS_DGUS_LCD            = src_filter=+<src/lcd/extui/lib/dgus> +<src/lcd/extui_dgus_lcd.cpp>
+TOUCH_UI_FTDI_EVE       = src_filter=+<src/lcd/extui/lib/ftdi_eve_touch_ui>
+HAS_ANYCUBIC_TFT_EXTUI  = src_filter=+<src/lcd/extui_anycubic_tft.cpp>
+EXTUI_EXAMPLE           = src_filter=+<src/lcd/extui_example.cpp>
+MALYAN_LCD              = src_filter=+<src/lcd/extui_malyan_lcd.cpp>
+HAS_SPI_LCD             = src_filter=+<src/lcd/lcdprint.cpp>
 USB_FLASH_DRIVE_SUPPORT = src_filter=+<src/sd/usb_flashdrive>
-AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+<src/feature/bedlevel/abl> +<src/gcode/bedlevel/abl>
+AUTO_BED_LEVELING_BILINEAR = src_filter=+<src/feature/bedlevel/abl>
+AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+<src/gcode/bedlevel/abl>
 MESH_BED_LEVELING       = src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
 AUTO_BED_LEVELING_UBL   = src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
+BACKLASH_COMPENSATION   = src_filter=+<src/feature/backlash.cpp>
+BARICUDA                = src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
+BINARY_FILE_TRANSFER    = src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
+BLTOUCH                 = src_filter=+<src/feature/bltouch.cpp>
+CANCEL_OBJECTS          = src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
+CASE_LIGHT_ENABLE       = src_filter=+<src/feature/caselight> +<src/gcode/feature/caselight>
+EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
+USE_CONTROLLER_FAN      = src_filter=+<src/feature/controllerfan.cpp>
 DAC_STEPPER_CURRENT     = src_filter=+<src/feature/dac>
-HAS_I2C_DIGIPOT         = src_filter=+<src/feature/digipot>
-HAS_LED_FEATURE         = src_filter=+<src/feature/leds>
-(ESP3D_)?WIFISUPPORT = AsyncTCP, ESP Async WebServer
+DIRECT_STEPPING         = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
+EMERGENCY_PARSER        = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
+I2C_POSITION_ENCODERS   = src_filter=+<src/feature/encoder_i2c.cpp>
+HAS_FANMUX              = src_filter=+<src/feature/fanmux.cpp>
+FILAMENT_WIDTH_SENSOR   = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
+FWRETRACT               = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
+HOST_ACTION_COMMANDS    = src_filter=+<src/feature/host_actions.cpp>
+HOTEND_IDLE_TIMEOUT     = src_filter=+<src/feature/hotend_idle.cpp>
+JOYSTICK                = src_filter=+<src/feature/joystick.cpp>
+BLINKM                  = src_filter=+<src/feature/leds/blinkm.cpp>
+HAS_COLOR_LEDS          = src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
+PCA9533                 = src_filter=+<src/feature/leds/pca9533.cpp>
+PCA9632                 = src_filter=+<src/feature/leds/pca9632.cpp>
+PRINTER_EVENT_LEDS      = src_filter=+<src/feature/leds/printer_event_leds.cpp>
+TEMP_STAT_LEDS          = src_filter=+<src/feature/leds/tempstat.cpp>
+MAX7219_DEBUG           = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
+MIXING_EXTRUDER         = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
+PRUSA_MMU2              = src_filter=+<src/feature/mmu2> +<src/gcode/feature/prusa_MMU2>
+ADVANCED_PAUSE_FEATURE  = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
+AUTO_POWER_CONTROL      = src_filter=+<src/feature/power.cpp>
+HAS_POWER_MONITOR       = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
+POWER_LOSS_RECOVERY     = src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
+PROBE_TEMP_COMPENSATION = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M871.cpp>
+HAS_FILAMENT_SENSOR     = src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
+MK2_MULTIPLEXER         = src_filter=+<src/feature/snmm.cpp>
+EXT_SOLENOID|MANUAL_SOLENOID_CONTROL = src_filter=+<src/feature/solenoid.cpp>
+HAS_CUTTER              = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
+EXPERIMENTAL_I2CBUS     = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
+Z_STEPPER_AUTO_ALIGN    = src_filter=+<src/feature/z_stepper_align.cpp> +<src/gcode/calibrate/G34_M422.cpp>
+G26_MESH_VALIDATION     = src_filter=+<src/gcode/bedlevel/G26.cpp>
+ASSISTED_TRAMMING       = src_filter=+<src/gcode/bedlevel/G35.cpp>
+HAS_MESH                = src_filter=+<src/gcode/bedlevel/G42.cpp>
+HAS_LEVELING            = src_filter=+<src/gcode/bedlevel/M420.cpp>
+DELTA_AUTO_CALIBRATION  = src_filter=+<src/gcode/calibrate/G33.cpp>
+CALIBRATION_GCODE       = src_filter=+<src/gcode/calibrate/G425.cpp>
+Z_MIN_PROBE_REPEATABILITY_TEST = src_filter=+<src/gcode/calibrate/M48.cpp>
+M100_FREE_MEMORY_WATCHER = src_filter=+<src/gcode/calibrate/M100.cpp>
+BACKLASH_GCODE          = src_filter=+<src/gcode/calibrate/M425.cpp>
+IS_KINEMATIC            = src_filter=+<src/gcode/calibrate/M665.cpp>
+HAS_EXTRA_ENDSTOPS      = src_filter=+<src/gcode/calibrate/M666.cpp>
+SKEW_CORRECTION_GCODE   = src_filter=+<src/gcode/calibrate/M852.cpp>
+PINS_DEBUGGING          = src_filter=-<src/gcode/config/M43.cpp>
+NO_VOLUMETRICS          = src_filter=-<src/gcode/config/M200-M205.cpp>
+HAS_MULTI_EXTRUDER      = src_filter=+<src/gcode/config/M217.cpp>
+HAS_HOTEND_OFFSET       = src_filter=+<src/gcode/config/M218.cpp>
+EDITABLE_SERVO_ANGLES   = src_filter=+<src/gcode/config/M281.cpp>
+PREVENT_COLD_EXTRUSION  = src_filter=+<src/gcode/config/M302.cpp>
+HAS_USER_THERMISTORS    = src_filter=+<src/gcode/config/M305.cpp>
+SD_ABORT_ON_ENDSTOP_HIT = src_filter=+<src/gcode/config/M540.cpp>
+COOLANT_CONTROL         = src_filter=+<src/gcode/control/M7-M9.cpp>
+HAS_SOFTWARE_ENDSTOPS   = src_filter=+<src/gcode/control/M211.cpp>
+HAS_DUPLICATION_MODE    = src_filter=+<src/gcode/control/M605.cpp>
+LIN_ADVANCE             = src_filter=+<src/gcode/feature/advance>
+PHOTO_GCODE             = src_filter=+<src/gcode/feature/camera>
+CONTROLLER_FAN_EDITABLE = src_filter=+<src/gcode/feature/controllerfan>
+GCODE_MACROS            = src_filter=+<src/gcode/feature/macro>
+GRADIENT_MIX            = src_filter=+<src/gcode/feature/mixing/M166.cpp>
+HAS_SAVED_POSITIONS     = src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
+PARK_HEAD_ON_PAUSE      = src_filter=+<src/gcode/feature/pause/M125.cpp>
+FILAMENT_LOAD_UNLOAD_GCODES = src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
+CNC_WORKSPACE_PLANES    = src_filter=+<src/gcode/geometry/G17-G19.cpp>
+CNC_COORDINATE_SYSTEMS  = src_filter=+<src/gcode/geometry/G53-G59.cpp>
+HAS_M206_COMMAND        = src_filter=+<src/gcode/geometry/M206_M428.cpp>
+EXPECTED_PRINTER_CHECK  = src_filter=+<src/gcode/host/M16.cpp>
+HOST_KEEPALIVE_FEATURE  = src_filter=+<src/gcode/host/M113.cpp>
+REPETIER_GCODE_M360     = src_filter=+<src/gcode/host/M360.cpp>
+HAS_GCODE_M876          = src_filter=+<src/gcode/host/M876.cpp>
+HAS_RESUME_CONTINUE     = src_filter=+<src/gcode/lcd/M0_M1.cpp>
+HAS_PREHEAT_COUNT       = src_filter=+<src/gcode/lcd/M145.cpp>
+HAS_LCD_CONTRAST        = src_filter=+<src/gcode/lcd/M250.cpp>
+LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp>
+TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp>
+ARC_SUPPORT             = src_filter=+<src/gcode/motion/G2_G3.cpp>
+GCODE_MOTION_MODES      = src_filter=+<src/gcode/motion/G80.cpp>
+BABYSTEPPING            = src_filter=+<src/gcode/motion/M290.cpp>
+Z_PROBE_SLED            = src_filter=+<src/gcode/probe/G31_G32.cpp>
+G38_PROBE_TARGET        = src_filter=+<src/gcode/probe/G38.cpp>
+MAGNETIC_PARKING_EXTRUDER = src_filter=+<src/gcode/probe/M951.cpp>
+SDSUPPORT               = src_filter=+<src/gcode/sd>
+HAS_EXTRUDERS           = src_filter=+<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
+INCH_MODE_SUPPORT       = src_filter=+<src/gcode/units/G20_G21.cpp>
+TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>
+NEED_HEX_PRINT          = src_filter=+<src/libs/hex_print.cpp>
+NEED_LSF                = src_filter=+<src/libs/least_squares_fit.cpp>
+NOZZLE_PARK_FEATURE     = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
+NOZZLE_CLEAN_FEATURE    = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
+DELTA                   = src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
+BEZIER_CURVE_SUPPORT    = src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
+PRINTCOUNTER            = src_filter=+<src/module/printcounter.cpp>
+HAS_BED_PROBE           = src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
+IS_SCARA                = src_filter=+<src/module/scara.cpp>
+MORGAN_SCARA            = src_filter=+<src/gcode/scara>
+(ESP3D_)?WIFISUPPORT    = AsyncTCP, ESP Async WebServer
   ESP3DLib=https://github.com/luc-github/ESP3DLib.git
   arduinoWebSockets=https://github.com/Links2004/arduinoWebSockets.git
   ESP32SSDP=https://github.com/luc-github/ESP32SSDP.git
@@ -268,14 +544,13 @@ src_filter    = ${common.default_src_filter} +<src/HAL/DUE>
 
 [env:DUE_USB]
 platform      = atmelsam
+extends       = env:DUE
 board         = dueUSB
-src_filter    = ${common.default_src_filter} +<src/HAL/DUE>
 
 [env:DUE_debug]
 # Used when WATCHDOG_RESET_MANUAL is enabled
 platform      = atmelsam
-board         = due
-src_filter    = ${common.default_src_filter} +<src/HAL/DUE>
+extends       = env:DUE
 build_flags   = ${common.build_flags}
   -funwind-tables
   -mpoke-function-name
@@ -285,8 +560,7 @@ build_flags   = ${common.build_flags}
 #
 [common_DUE_archim]
 platform      = atmelsam
-board         = due
-src_filter    = ${common.default_src_filter} +<src/HAL/DUE>
+extends       = env:DUE
 build_flags   = ${common.build_flags}
   -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSBCON
 extra_scripts = ${common.extra_scripts}
@@ -320,7 +594,7 @@ src_filter     = ${common.default_src_filter} +<src/HAL/SAMD51>
 lib_deps       = ${common.lib_deps}
   SoftwareSerialM
   Adafruit SPIFlash
-  SdFat - Adafruit Fork
+marlin.SDSUPPORT = SdFat - Adafruit Fork
 debug_tool     = jlink
 
 #################################
@@ -342,8 +616,8 @@ extra_scripts     = ${common.extra_scripts}
 src_filter        = ${common.default_src_filter} +<src/HAL/LPC1768>
 lib_deps          = ${common.lib_deps}
   Servo
-  LiquidCrystal@1.0.0
-  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip
+marlin.USES_LIQUIDCRYSTAL = LiquidCrystal@1.0.0
+marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip
 build_flags       = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g
   # debug options for backtrace
   #-funwind-tables
@@ -426,9 +700,9 @@ extra_scripts     = ${common.extra_scripts}
   pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
   buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
 lib_deps          = ${common.lib_deps}
-  Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
   SoftwareSerialM
   USBComposite for STM32F1@0.91
+marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
 debug_tool        = stlink
 upload_protocol   = dfu