Load balance some tests

Marlin/src/pins/rambo/pins_RAMBO.h

@@ -72,6 +72,10 @@
   #define Z_MIN_PROBE_PIN                     30
 #endif
 
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                       5
+#endif
+
 //
 // Steppers
 //
@@ -154,6 +158,13 @@
 #define SPINDLE_DIR_PIN                       32
 
 //
+// SPI for Max6675 or Max31855 Thermocouple
+//
+#ifndef MAX6675_SS_PIN
+  #define MAX6675_SS_PIN                      32  // SPINDLE_DIR_PIN / STAT_LED_BLUE_PIN
+#endif
+
+//
 // M7/M8/M9 - Coolant Control
 //
 #define COOLANT_MIST_PIN                      22

Marlin/src/pins/ramps/pins_RAMPS.h

@@ -169,11 +169,11 @@
   #define TEMP_BED_PIN                        14  // Analog Input
 #endif
 
+//
 // SPI for Max6675 or Max31855 Thermocouple
-#if DISABLED(SDSUPPORT)
-  #define MAX6675_SS_PIN                      66  // Don't use 53 if using Display/SD card
-#else
-  #define MAX6675_SS_PIN                      66  // Don't use 49 (SD_DETECT_PIN)
+//
+#ifndef MAX6675_SS_PIN
+  #define MAX6675_SS_PIN                      66  // Don't use 53 if using Display/SD card (SDSS) or 49 (SD_DETECT_PIN)
 #endif
 
 //

buildroot/share/tests/mega2560-tests

@@ -13,43 +13,6 @@ set -e
 #exec_test $1 $2 "Default Configuration"
 
 #
-# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
-# Test a "Fix Mounted" Probe with Safe Homing, some arc options,
-# linear bed leveling, M48, leveling debug, and firmware retraction.
-#
-restore_configs
-opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
-opt_set EXTRUDERS 2
-opt_set TEMP_SENSOR_0 -2
-opt_set TEMP_SENSOR_1 1
-opt_set TEMP_SENSOR_BED 2
-opt_set TEMP_SENSOR_PROBE 1
-opt_add TEMP_PROBE_PIN 12
-opt_set TEMP_SENSOR_CHAMBER 3
-opt_add HEATER_CHAMBER_PIN 45
-opt_set GRID_MAX_POINTS_X 16
-opt_set FANMUX0_PIN 53
-opt_disable USE_WATCHDOG
-opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
-           FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING PIDTEMPBED \
-           PROBING_HEATERS_OFF PROBING_FANS_OFF PROBING_STEPPERS_OFF WAIT_FOR_BED_HEATER \
-           EEPROM_SETTINGS SDSUPPORT SD_REPRINT_LAST_SELECTED_FILE BINARY_FILE_TRANSFER \
-           BLINKM PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \
-           NEOPIXEL_LED CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \
-           PID_PARAMS_PER_HOTEND PID_AUTOTUNE_MENU PID_EDIT_MENU LCD_SHOW_E_TOTAL \
-           PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LEVEL_BED_CORNERS \
-           NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \
-           ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \
-           AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DISTINCT_E_FACTORS \
-           SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
-           BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
-           FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
-           PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
-           SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
-           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
-exec_test $1 $2 "RAMPS | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..."
-
-#
 # Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
 #
 use_example_configs AnimationExample

buildroot/share/tests/rambo-tests

@@ -33,5 +33,40 @@ opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
 opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS
 exec_test $1 $2 "Rambo CNC Configuration"
 
+#
+# Lots of options - Formerly the first Mega2560 test
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMBO
+opt_set EXTRUDERS 2
+opt_set TEMP_SENSOR_0 -2
+opt_set TEMP_SENSOR_1 1
+opt_set TEMP_SENSOR_BED 2
+opt_set TEMP_SENSOR_PROBE 1
+opt_add TEMP_PROBE_PIN 12
+opt_set TEMP_SENSOR_CHAMBER 3
+opt_add HEATER_CHAMBER_PIN 45
+opt_set GRID_MAX_POINTS_X 16
+opt_set FANMUX0_PIN 53
+opt_disable USE_WATCHDOG
+opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
+           FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING PIDTEMPBED \
+           PROBING_HEATERS_OFF PROBING_FANS_OFF PROBING_STEPPERS_OFF WAIT_FOR_BED_HEATER \
+           EEPROM_SETTINGS SDSUPPORT SD_REPRINT_LAST_SELECTED_FILE BINARY_FILE_TRANSFER \
+           BLINKM PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \
+           NEOPIXEL_LED CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \
+           PID_PARAMS_PER_HOTEND PID_AUTOTUNE_MENU PID_EDIT_MENU LCD_SHOW_E_TOTAL \
+           PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LEVEL_BED_CORNERS \
+           NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \
+           ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \
+           AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DISTINCT_E_FACTORS \
+           SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
+           BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
+           FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
+           PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
+           SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
+exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..."
+
 # clean up
 restore_configs