✏️ Remove whitespace

buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1_0/PeripheralPins.c

@@ -88,7 +88,7 @@ const PinMap PinMap_ADC[] = {
   //  {PC_4,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
   //  {PC_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
   //  {PC_5,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
-  
+
 };
 #endif
 
@@ -214,7 +214,7 @@ const PinMap PinMap_PWM[] = {
   //{PF_7,  TIM11,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
   //{PF_8,  TIM13,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
   //{PF_9,  TIM14,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
-  
+
   //176 pins mcu, 140 gpio
     //{PH_10,  TIM5,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
     //{PH_6,  TIM12,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
@@ -393,12 +393,12 @@ const PinMap PinMap_USB_OTG_FS[] = {
 #endif
 
 #ifdef HAL_PCD_MODULE_ENABLED
-const PinMap PinMap_USB_OTG_HS[] = { 
+const PinMap PinMap_USB_OTG_HS[] = {
     //{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID
     //{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS
     {PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM
     {PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP
- 
+
     /*#error "USB in HS mode isn't supported by the board"
     {PA_3,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0
     {PB_0,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1

buildroot/share/PlatformIO/variants/MARLIN_F103Rx/ldscript.ld

@@ -102,7 +102,7 @@ SECTIONS
     . = ALIGN(4);
   } >FLASH
 
-  .ARM.extab   : { 
+  .ARM.extab   : {
   	. = ALIGN(4);
   	*(.ARM.extab* .gnu.linkonce.armextab.*)
   	. = ALIGN(4);
@@ -146,7 +146,7 @@ SECTIONS
   _sidata = LOADADDR(.data);
 
   /* Initialized data sections into "RAM" Ram type memory */
-  .data : 
+  .data :
   {
     . = ALIGN(4);
     _sdata = .;        /* create a global symbol at data start */
@@ -157,7 +157,7 @@ SECTIONS
     _edata = .;        /* define a global symbol at data end */
   } >RAM AT> FLASH
 
-  
+
   /* Uninitialized data section into "RAM" Ram type memory */
   . = ALIGN(4);
   .bss :
@@ -185,7 +185,7 @@ SECTIONS
     . = ALIGN(8);
   } >RAM
 
-  
+
 
   /* Remove information from the compiler libraries */
   /DISCARD/ :