|
@@ -620,7 +620,7 @@
|
620
|
620
|
* Use G29 repeatedly, adjusting the Z height at each point with movement commands
|
621
|
621
|
* or (with LCD_BED_LEVELING) the LCD controller.
|
622
|
622
|
*/
|
623
|
|
-//#define PROBE_MANUALLY
|
|
623
|
+#define PROBE_MANUALLY
|
624
|
624
|
|
625
|
625
|
/**
|
626
|
626
|
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
|
|
@@ -768,7 +768,7 @@
|
768
|
768
|
|
769
|
769
|
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
|
770
|
770
|
|
771
|
|
-//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
|
|
771
|
+#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
|
772
|
772
|
// Be sure you have this distance over your Z_MAX_POS in case.
|
773
|
773
|
|
774
|
774
|
// Direction of endstops when homing; 1=MAX, -1=MIN
|
|
@@ -871,9 +871,9 @@
|
871
|
871
|
*/
|
872
|
872
|
//#define AUTO_BED_LEVELING_3POINT
|
873
|
873
|
//#define AUTO_BED_LEVELING_LINEAR
|
874
|
|
-//#define AUTO_BED_LEVELING_BILINEAR
|
|
874
|
+#define AUTO_BED_LEVELING_BILINEAR
|
875
|
875
|
//#define AUTO_BED_LEVELING_UBL
|
876
|
|
-#define MESH_BED_LEVELING
|
|
876
|
+//#define MESH_BED_LEVELING
|
877
|
877
|
|
878
|
878
|
/**
|
879
|
879
|
* Enable detailed logging of G28, G29, M48, etc.
|
|
@@ -899,10 +899,10 @@
|
899
|
899
|
*/
|
900
|
900
|
#define G26_MESH_VALIDATION // Enable G26 mesh validation
|
901
|
901
|
#if ENABLED(G26_MESH_VALIDATION)
|
902
|
|
- #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
903
|
|
- #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
904
|
|
- #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
905
|
|
- #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
|
|
902
|
+ #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
|
903
|
+ #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
|
904
|
+ #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
|
905
|
+ #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
|
906
|
906
|
#endif
|
907
|
907
|
|
908
|
908
|
#endif
|
|
@@ -1113,8 +1113,8 @@
|
1113
|
1113
|
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
1114
|
1114
|
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
1115
|
1115
|
//
|
1116
|
|
-#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
1117
|
|
-#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
|
1116
|
+#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
|
1117
|
+//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
1118
|
1118
|
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
1119
|
1119
|
|
1120
|
1120
|
//
|