Followup for step timing (#16128)

config/default/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -1550,12 +1550,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Alfawise/U20/Configuration_adv.h

@@ -1549,12 +1549,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Anet/A2/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Anet/A2plus/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Anet/A6/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Anet/A8/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Anet/A8plus/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Anet/E16/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/ArmEd/Configuration_adv.h

@@ -1552,12 +1552,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1556,12 +1556,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Cartesio/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/CR-10/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/CR-20/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/CR-8/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Einstart-S/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/FYSETC/S6/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Felix/DUAL/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Felix/Single/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -1547,12 +1547,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1550,12 +1550,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1552,12 +1552,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1552,12 +1552,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/A10/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/A10D/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/A10T/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/A20/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/A20T/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/A30/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/E180/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -1547,12 +1547,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/PI3A PRO/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/HMS434/Configuration_adv.h

@@ -1540,12 +1540,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/JGAurora/A1/Configuration_adv.h

@@ -1553,12 +1553,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/JGAurora/A5/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -1553,12 +1553,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/MakerParts/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Malyan/M150/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Malyan/M200/Configuration_adv.h

@@ -1550,12 +1550,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Mks/Robin/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Mks/Sbase/Configuration_adv.h

@@ -1549,12 +1549,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Modix/Big60/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Renkforce/RF100/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Renkforce/RF100XL/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Renkforce/RF100v2/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/RigidBot/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/SCARA/MP_SCARA/Configuration_adv.h

@@ -1454,12 +1454,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/SCARA/Morgan/Configuration_adv.h

@@ -1545,12 +1545,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Sanguinololu/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Tevo/Michelangelo/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Tevo/Tarantula Pro/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/TheBorg/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/TinyBoy2/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/VORONDesign/Configuration_adv.h

@@ -1548,12 +1548,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

config/examples/Velleman/K8200/Configuration_adv.h

@@ -1561,12 +1561,12 @@
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  200000 : Maximum for LV8729 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */