Bring configurations up to date

Marlin/Configuration.h

@@ -1404,8 +1404,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/default/Configuration.h

@@ -1404,8 +1404,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -1424,8 +1424,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -1404,8 +1404,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -1561,8 +1561,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -1410,8 +1410,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -1404,8 +1404,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -1395,8 +1395,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -1405,8 +1405,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -572,6 +572,9 @@
     //#define LCD_PROGRESS_BAR_TEST
   #endif
 
+  // Add an 'M73' G-code to set the current percentage
+  //#define LCD_SET_PROGRESS_MANUALLY
+
   // This allows hosts to request long names for files and folders with M33
   #define LONG_FILENAME_HOST_SUPPORT
 

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -1395,8 +1395,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -1414,8 +1414,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Felix/Configuration.h

@@ -1386,8 +1386,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -1386,8 +1386,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -1401,8 +1401,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -1419,8 +1419,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -1408,8 +1408,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -1432,8 +1432,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -572,6 +572,9 @@
     //#define LCD_PROGRESS_BAR_TEST
   #endif
 
+  // Add an 'M73' G-code to set the current percentage
+  //#define LCD_SET_PROGRESS_MANUALLY
+
   // This allows hosts to request long names for files and folders with M33
   #define LONG_FILENAME_HOST_SUPPORT
 

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -1408,8 +1408,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -1406,8 +1406,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard
@@ -1714,7 +1714,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -677,20 +677,6 @@
 
 // @section extruder
 
-// extruder advance constant (s2/mm3)
-//
-// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2
-//
-// Hooke's law says:    force = k * distance
-// Bernoulli's principle says:  v ^ 2 / 2 + g . h + pressure / density = constant
-// so: v ^ 2 is proportional to number of steps we advance the extruder
-//#define ADVANCE
-
-#if ENABLED(ADVANCE)
-  #define EXTRUDER_ADVANCE_K .0
-  #define D_FILAMENT 2.85
-#endif
-
 /**
  * Implementation of linear pressure control
  *

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -1404,8 +1404,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -1402,8 +1402,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/SCARA/Configuration.h

@@ -1416,8 +1416,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -1407,8 +1407,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -1435,8 +1435,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -1460,8 +1460,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

@@ -1404,8 +1404,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -1437,8 +1437,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -583,6 +583,9 @@
     //#define LCD_PROGRESS_BAR_TEST
   #endif
 
+  // Add an 'M73' G-code to set the current percentage
+  //#define LCD_SET_PROGRESS_MANUALLY
+
   // This allows hosts to request long names for files and folders with M33
   #define LONG_FILENAME_HOST_SUPPORT
 

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -1404,8 +1404,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -1404,8 +1404,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -1404,8 +1404,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1538,8 +1538,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -1531,8 +1531,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -1525,8 +1525,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -1528,8 +1528,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -1528,8 +1528,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -1537,8 +1537,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -1418,8 +1418,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/makibox/Configuration.h

@@ -1407,8 +1407,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -1399,8 +1399,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard

Marlin/src/config/examples/wt150/Configuration.h

@@ -1409,8 +1409,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard