Fix typo in G34 configuration (#15572)

Marlin/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/default/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -604,7 +604,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Alfawise/U20/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Anet/A2/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Anet/A2plus/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Anet/A6/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Anet/A8/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Anet/A8plus/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Anet/E16/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/ArmEd/Configuration_adv.h

@@ -607,7 +607,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Cartesio/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/CR-10/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/CR-20/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/CR-8/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Einstart-S/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Felix/DUAL/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Felix/Single/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -607,7 +607,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -607,7 +607,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Geeetech/A10/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/HMS434/Configuration_adv.h

@@ -595,7 +595,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/JGAurora/A1/Configuration_adv.h

@@ -608,7 +608,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/JGAurora/A5/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -608,7 +608,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/MakerParts/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Malyan/M150/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Malyan/M200/Configuration_adv.h

@@ -605,7 +605,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Mks/Robin/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Mks/Sbase/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/RigidBot/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/SCARA/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Sanguinololu/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Tevo/Michelangelo/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Tevo/Tarantula Pro/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/TheBorg/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/TinyBoy2/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/VORONDesign/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Velleman/K8200/Configuration_adv.h

@@ -616,7 +616,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Velleman/K8400/Dual-head/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Velleman/K8400/Single-head/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/Dreammaker/Overlord/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34

config/examples/delta/generic/Configuration_adv.h

@@ -603,7 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34