LPC176x Framework update (#15722)

Changes required for compatibility with framework-arduino-lpc176x 0.2.0

Marlin/src/HAL/HAL_LPC1768/HAL.cpp

   #include "watchdog.h"
 #endif
 
+uint32_t HAL_adc_reading = 0;
+
 // U8glib required functions
 extern "C" void u8g_xMicroDelay(uint16_t val) {
   DELAY_US(val);
 //   return dval if not found or not a valid pin.
 int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) {
   const uint16_t val = (uint16_t)parser.intval(code, -1), port = val / 100, pin = val % 100;
-  const  int16_t ind = (port < ((NUM_DIGITAL_PINS) >> 5) && pin < 32) ? GET_PIN_MAP_INDEX((port << 5) | pin) : -2;
+  const  int16_t ind = (port < ((NUM_DIGITAL_PINS) >> 5) && pin < 32) ? ((port << 5) | pin) : -2;
   return ind > -1 ? ind : dval;
 }
 

Marlin/src/HAL/HAL_LPC1768/HAL.h

                                     // Memory usage per ADC channel (bytes): 4 (32 Bytes for 8 channels)
 
 using FilteredADC = LPC176x::ADC<ADC_LOWPASS_K_VALUE, ADC_MEDIAN_FILTER_SIZE>;
-#define HAL_adc_init()         FilteredADC::init()
+
+extern uint32_t HAL_adc_reading;
+[[gnu::always_inline]] inline void HAL_start_adc(const pin_t pin) {
+  HAL_adc_reading = FilteredADC::read(pin) >> 6; // returns 16bit value, reduce to 10bit
+}
+[[gnu::always_inline]] inline uint16_t HAL_read_adc() {
+  return HAL_adc_reading;
+}
+
+#define HAL_adc_init()
 #define HAL_ANALOG_SELECT(pin) FilteredADC::enable_channel(pin)
-#define HAL_START_ADC(pin)     FilteredADC::start_conversion(pin)
-#define HAL_READ_ADC()         FilteredADC::get_result()
-#define HAL_ADC_READY()        FilteredADC::finished_conversion()
+#define HAL_START_ADC(pin)     HAL_start_adc(pin)
+#define HAL_READ_ADC()         HAL_read_adc()
+#define HAL_ADC_READY()        (true)
+
+// Test whether the pin is valid
+constexpr bool VALID_PIN(const pin_t pin) {
+  return LPC176x::pin_is_valid(pin);
+}
+
+// Get the analog index for a digital pin
+constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t pin) {
+  return (LPC176x::pin_is_valid(pin) && LPC176x::pin_has_adc(pin)) ? pin : -1;
+}
+
+// Return the index of a pin number
+constexpr int16_t GET_PIN_MAP_INDEX(const pin_t pin) {
+  return LPC176x::pin_index(pin);
+}
+
+// Get the pin number at the given index
+constexpr pin_t GET_PIN_MAP_PIN(const int16_t index) {
+  return LPC176x::pin_index(index);
+}
 
 // Parse a G-code word into a pin index
 int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);

Marlin/src/HAL/HAL_LPC1768/HAL_SPI.cpp

     PinCfg.Funcnum = 2;
     PinCfg.OpenDrain = 0;
     PinCfg.Pinmode = 0;
-    PinCfg.Pinnum = LPC1768_PIN_PIN(SCK_PIN);
-    PinCfg.Portnum = LPC1768_PIN_PORT(SCK_PIN);
+    PinCfg.Pinnum = LPC176x::pin_bit(SCK_PIN);
+    PinCfg.Portnum = LPC176x::pin_port(SCK_PIN);
     PINSEL_ConfigPin(&PinCfg);
     SET_OUTPUT(SCK_PIN);
 
-    PinCfg.Pinnum = LPC1768_PIN_PIN(MISO_PIN);
-    PinCfg.Portnum = LPC1768_PIN_PORT(MISO_PIN);
+    PinCfg.Pinnum = LPC176x::pin_bit(MISO_PIN);
+    PinCfg.Portnum = LPC176x::pin_port(MISO_PIN);
     PINSEL_ConfigPin(&PinCfg);
     SET_INPUT(MISO_PIN);
 
-    PinCfg.Pinnum = LPC1768_PIN_PIN(MOSI_PIN);
-    PinCfg.Portnum = LPC1768_PIN_PORT(MOSI_PIN);
+    PinCfg.Pinnum = LPC176x::pin_bit(MOSI_PIN);
+    PinCfg.Portnum = LPC176x::pin_port(MOSI_PIN);
     PINSEL_ConfigPin(&PinCfg);
     SET_OUTPUT(MOSI_PIN);
     // divide PCLK by 2 for SSP0

Marlin/src/HAL/HAL_LPC1768/endstop_interrupts.h

 
 void setup_endstop_interrupts() {
   #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
+  #define LPC1768_PIN_INTERRUPT_M(pin) ((pin >> 0x5 & 0x7) == 0 || (pin >> 0x5 & 0x7) == 2)
+
   #if HAS_X_MAX
     #if !LPC1768_PIN_INTERRUPT_M(X_MAX_PIN)
       #error "X_MAX_PIN is not INTERRUPT-capable."

Marlin/src/HAL/HAL_LPC1768/fast_pwm.cpp

 #include <pwm.h>
 
 void set_pwm_frequency(const pin_t pin, int f_desired) {
-  pwm_set_frequency(pin, f_desired);
+  LPC176x::pwm_set_frequency(pin, f_desired);
 }
 
 void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
-  pwm_write_ratio(pin, invert ? 1.0f - (float)v / v_size : (float)v / v_size);
+  LPC176x::pwm_write_ratio(pin, invert ? 1.0f - (float)v / v_size : (float)v / v_size);
 }
 
 #endif // FAST_PWM_FAN || SPINDLE_LASER_PWM

Marlin/src/HAL/HAL_LPC1768/fastio.h

 
 #define PWM_PIN(P)            true // all pins are PWM capable
 
-#define LPC_PIN(pin)          gpio_pin(pin)
-#define LPC_GPIO(port)        gpio_port(port)
+#define LPC_PIN(pin)          LPC176x::gpio_pin(pin)
+#define LPC_GPIO(port)        LPC176x::gpio_port(port)
 
-#define SET_DIR_INPUT(IO)     gpio_set_input(IO)
-#define SET_DIR_OUTPUT(IO)    gpio_set_output(IO)
+#define SET_DIR_INPUT(IO)     LPC176x::gpio_set_input(IO)
+#define SET_DIR_OUTPUT(IO)    LPC176x::gpio_set_output(IO)
 
 #define SET_MODE(IO, mode)    pinMode(IO, mode)
 
-#define WRITE_PIN_SET(IO)     gpio_set(IO)
-#define WRITE_PIN_CLR(IO)     gpio_clear(IO)
+#define WRITE_PIN_SET(IO)     LPC176x::gpio_set(IO)
+#define WRITE_PIN_CLR(IO)     LPC176x::gpio_clear(IO)
 
-#define READ_PIN(IO)          gpio_get(IO)
-#define WRITE_PIN(IO,V)       gpio_set(IO, V)
+#define READ_PIN(IO)          LPC176x::gpio_get(IO)
+#define WRITE_PIN(IO,V)       LPC176x::gpio_set(IO, V)
 
 /**
  * Magic I/O routines
 #define _PULLDOWN(IO,V)       pinMode(IO, (V) ? INPUT_PULLDOWN : INPUT)
 
 /// check if pin is an input
-#define _IS_INPUT(IO)         (!gpio_get_dir(IO))
+#define _IS_INPUT(IO)         (!LPC176x::gpio_get_dir(IO))
 
 /// check if pin is an output
-#define _IS_OUTPUT(IO)        (gpio_get_dir(IO))
+#define _IS_OUTPUT(IO)        (LPC176x::gpio_get_dir(IO))
 
 /// Read a pin wrapper
 #define READ(IO)              _READ(IO)

Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h

  */
 #pragma once
 
+#if PIO_PLATFORM_VERSION < 000001000
+  #error "nxplpc-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries. You may need to remove the platform and let it reinstall automatically."
+#endif
+#if PIO_FRAMEWORK_VERSION < 000002000
+  #error "framework-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries."
+#endif
+
 /**
  * Test LPC176x-specific configuration values for errors at compile-time.
  */

Marlin/src/HAL/HAL_LPC1768/pinsDebug.h

 #define PRINT_PORT(p)
 #define GET_ARRAY_PIN(p) pin_array[p].pin
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%d.%02d"), LPC1768_PIN_PORT(p), LPC1768_PIN_PIN(p)); SERIAL_ECHO(buffer); }while(0)
+#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%d.%02d"), LPC176x::pin_port(p), LPC176x::pin_bit(p)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
 
 // pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
-//  uses pin index
 #ifndef M43_NEVER_TOUCH
-  #define M43_NEVER_TOUCH(Q) ((Q) == 29 || (Q) == 30 || (Q) == 73)  // USB pins
+  #define M43_NEVER_TOUCH(Q) ((Q) == P0_29 || (Q) == P0_30 || (Q) == P2_09)  // USB pins
 #endif
 
-// active ADC function/mode/code values for PINSEL registers
-constexpr int8_t ADC_pin_mode(pin_t pin) {
-  return (LPC1768_PIN_PORT(pin) == 0 && LPC1768_PIN_PIN(pin) == 2  ? 2 :
-          LPC1768_PIN_PORT(pin) == 0 && LPC1768_PIN_PIN(pin) == 3  ? 2 :
-          LPC1768_PIN_PORT(pin) == 0 && LPC1768_PIN_PIN(pin) == 23 ? 1 :
-          LPC1768_PIN_PORT(pin) == 0 && LPC1768_PIN_PIN(pin) == 24 ? 1 :
-          LPC1768_PIN_PORT(pin) == 0 && LPC1768_PIN_PIN(pin) == 25 ? 1 :
-          LPC1768_PIN_PORT(pin) == 0 && LPC1768_PIN_PIN(pin) == 26 ? 1 :
-          LPC1768_PIN_PORT(pin) == 1 && LPC1768_PIN_PIN(pin) == 30 ? 3 :
-          LPC1768_PIN_PORT(pin) == 1 && LPC1768_PIN_PIN(pin) == 31 ? 3 : -1);
-}
-
-int8_t get_pin_mode(pin_t pin) {
-  if (!VALID_PIN(pin)) return -1;
-  uint8_t pin_port = LPC1768_PIN_PORT(pin);
-  uint8_t pin_port_pin = LPC1768_PIN_PIN(pin);
-  //get appropriate PINSEL register
-  volatile uint32_t * pinsel_reg = (pin_port == 0 && pin_port_pin <= 15) ? &LPC_PINCON->PINSEL0 :
-                                   (pin_port == 0)                       ? &LPC_PINCON->PINSEL1 :
-                                   (pin_port == 1 && pin_port_pin <= 15) ? &LPC_PINCON->PINSEL2 :
-                                    pin_port == 1                        ? &LPC_PINCON->PINSEL3 :
-                                    pin_port == 2                        ? &LPC_PINCON->PINSEL4 :
-                                    pin_port == 3                        ? &LPC_PINCON->PINSEL7 : &LPC_PINCON->PINSEL9;
-  uint8_t pinsel_start_bit = pin_port_pin > 15 ? 2 * (pin_port_pin - 16) : 2 * pin_port_pin;
-  int8_t pin_mode = (int8_t) ((*pinsel_reg >> pinsel_start_bit) & 0x3);
-  return pin_mode;
-}
-
-bool GET_PINMODE(pin_t pin) {
-  int8_t pin_mode = get_pin_mode(pin);
-  if (pin_mode == -1 || pin_mode == ADC_pin_mode(pin)) // found an invalid pin or active analog pin
+bool GET_PINMODE(const pin_t pin) {
+  if (!LPC176x::pin_is_valid(pin) || LPC176x::pin_adc_enabled(pin)) // found an invalid pin or active analog pin
     return false;
 
-  uint32_t * FIO_reg[5] PROGMEM = {(uint32_t*) 0x2009C000,(uint32_t*)  0x2009C020,(uint32_t*)  0x2009C040,(uint32_t*)  0x2009C060,(uint32_t*)  0x2009C080};
-  return ((*FIO_reg[LPC1768_PIN_PORT(pin)] >> LPC1768_PIN_PIN(pin) & 1) != 0); //input/output state
+  return LPC176x::gpio_direction(pin);
 }
 
-bool GET_ARRAY_IS_DIGITAL(pin_t pin) {
-  return (!IS_ANALOG(pin) || get_pin_mode(pin) != ADC_pin_mode(pin));
+bool GET_ARRAY_IS_DIGITAL(const pin_t pin) {
+  return (!LPC176x::pin_has_adc(pin) || !LPC176x::pin_adc_enabled(pin));
 }

Marlin/src/HAL/HAL_LPC1768/timers.h

 typedef uint32_t hal_timer_t;
 #define HAL_TIMER_TYPE_MAX 0xFFFFFFFF
 
-#define HAL_TIMER_RATE         ((SystemCoreClock) / 4)  // frequency of timers peripherals
+#define HAL_TIMER_RATE         ((F_CPU) / 4)  // frequency of timers peripherals
 
 #define STEP_TIMER_NUM 0  // Timer Index for Stepper
 #define TEMP_TIMER_NUM 1  // Timer Index for Temperature

Marlin/src/HAL/HAL_LPC1768/u8g/LCD_I2C_routines.c

 #include <lpc17xx_libcfg_default.h>
 
 #include "../../../core/millis_t.h"
-
+extern int millis();
 //////////////////////////////////////////////////////////////////////////////////////
 
 // These two routines are exact copies of the lpc17xx_i2c.c routines.  Couldn't link to
   u8g_i2c_start(0); // send slave address and write bit
 }
 
-volatile extern millis_t _millis;
 uint8_t u8g_i2c_send_byte(uint8_t data) {
   #define I2C_TIMEOUT 3
   LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data
   LPC_I2C1->I2CONSET = I2C_I2CONSET_AA;
   LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC;
-  const millis_t timeout = _millis + I2C_TIMEOUT;
-  while ((I2C_status != I2C_I2STAT_M_TX_DAT_ACK) && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK) && PENDING(_millis, timeout));  // wait for xmit to finish
+  const millis_t timeout = millis() + I2C_TIMEOUT;
+  while ((I2C_status != I2C_I2STAT_M_TX_DAT_ACK) && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK) && PENDING(millis(), timeout));  // wait for xmit to finish
   // had hangs with SH1106 so added time out - have seen temporary screen corruption when this happens
   return 1;
 }

Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp

 
   for (uint8_t i = 0; i < 8; i++) {
     if (spi_speed == 0) {
-      gpio_set(mosi_pin, !!(b & 0x80));
-      gpio_set(sck_pin, HIGH);
+      LPC176x::gpio_set(mosi_pin, !!(b & 0x80));
+      LPC176x::gpio_set(sck_pin, HIGH);
       b <<= 1;
-      if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
-      gpio_set(sck_pin, LOW);
+      if (miso_pin >= 0 && LPC176x::gpio_get(miso_pin)) b |= 1;
+      LPC176x::gpio_set(sck_pin, LOW);
     }
     else {
       const uint8_t state = (b & 0x80) ? HIGH : LOW;
       for (uint8_t j = 0; j < spi_speed; j++)
-        gpio_set(mosi_pin, state);
+        LPC176x::gpio_set(mosi_pin, state);
 
       for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
-        gpio_set(sck_pin, HIGH);
+        LPC176x::gpio_set(sck_pin, HIGH);
 
       b <<= 1;
-      if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
+      if (miso_pin >= 0 && LPC176x::gpio_get(miso_pin)) b |= 1;
 
       for (uint8_t j = 0; j < spi_speed; j++)
-        gpio_set(sck_pin, LOW);
+        LPC176x::gpio_set(sck_pin, LOW);
     }
   }
 
   for (uint8_t i = 0; i < 8; i++) {
     const uint8_t state = (b & 0x80) ? HIGH : LOW;
     if (spi_speed == 0) {
-      gpio_set(sck_pin, LOW);
-      gpio_set(mosi_pin, state);
-      gpio_set(mosi_pin, state);  // need some setup time
-      gpio_set(sck_pin, HIGH);
+      LPC176x::gpio_set(sck_pin, LOW);
+      LPC176x::gpio_set(mosi_pin, state);
+      LPC176x::gpio_set(mosi_pin, state);  // need some setup time
+      LPC176x::gpio_set(sck_pin, HIGH);
     }
     else {
       for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
-        gpio_set(sck_pin, LOW);
+        LPC176x::gpio_set(sck_pin, LOW);
 
       for (uint8_t j = 0; j < spi_speed; j++)
-        gpio_set(mosi_pin, state);
+        LPC176x::gpio_set(mosi_pin, state);
 
       for (uint8_t j = 0; j < spi_speed; j++)
-        gpio_set(sck_pin, HIGH);
+        LPC176x::gpio_set(sck_pin, HIGH);
     }
     b <<= 1;
-    if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
+    if (miso_pin >= 0 && LPC176x::gpio_get(miso_pin)) b |= 1;
   }
 
   return b;

Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h

  * AZSMZ MINI pin assignments
  */
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 //  3.3V max when defined as an analog input
 //
-#define TEMP_0_PIN          0   // A0 (TH1)
-#define TEMP_BED_PIN        1   // A1 (TH2)
-#define TEMP_1_PIN          2   // A2 (TH3)
+#define TEMP_0_PIN          P0_23_A0   // A0 (TH1)
+#define TEMP_BED_PIN        P0_24_A1   // A1 (TH2)
+#define TEMP_1_PIN          P0_25_A2   // A2 (TH3)
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.1.h

  */
 #pragma once
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 //  3.3V max when defined as an analog input
 //
-#define TEMP_BED_PIN       0   // Analog Input
-#define TEMP_0_PIN         1   // Analog Input
-#define TEMP_1_PIN         2   // Analog Input
+#define TEMP_BED_PIN       P0_23_A0   // Analog Input
+#define TEMP_0_PIN         P0_24_A1   // Analog Input
+#define TEMP_1_PIN         P0_25_A2   // Analog Input
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.3.h

  */
 #pragma once
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 //  3.3V max when defined as an analog input
 //
-#define TEMP_BED_PIN       0   // A0 (T0) - (67) - TEMP_BED_PIN
-#define TEMP_0_PIN         1   // A1 (T1) - (68) - TEMP_0_PIN
-#define TEMP_1_PIN         2   // A2 (T2) - (69) - TEMP_1_PIN
+#define TEMP_BED_PIN       P0_23_A0   // A0 (T0) - (67) - TEMP_BED_PIN
+#define TEMP_0_PIN         P0_24_A1   // A1 (T1) - (68) - TEMP_0_PIN
+#define TEMP_1_PIN         P0_25_A2   // A2 (T2) - (69) - TEMP_1_PIN
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h

  *
  */
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 //  3.3V max when defined as an analog input
 //
-#define TEMP_0_PIN          1   // A0 (T0)
-#define TEMP_BED_PIN        0   // A1 (T1)
+#define TEMP_0_PIN          P0_24_A1   // A0 (T0)
+#define TEMP_BED_PIN        P0_23_A0   // A1 (T1)
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h

  *
  */
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 //  3.3V max when defined as an analog input
 //
-#define TEMP_0_PIN          0   // A0 (T0)
-#define TEMP_BED_PIN        1   // A1 (T1)
+#define TEMP_0_PIN          P0_23_A0   // A0 (T0)
+#define TEMP_BED_PIN        P0_24_A1   // A1 (T1)
 
 
 //

Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h

  */
 #pragma once
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 //  3.3V max when defined as an analog input
 //
-#define TEMP_0_PIN          1   // AD0[0] on P0_23
-#define TEMP_BED_PIN        0   // AD0[1] on P0_24
+#define TEMP_0_PIN          P0_24_A1   // AD0[0] on P0_23
+#define TEMP_BED_PIN        P0_23_A0   // AD0[1] on P0_24
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1768/pins_MKS_SBASE.h

  * MKS SBASE pin assignments
  */
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 // 3.3V max when defined as an analog input
 //
-#define TEMP_BED_PIN        0   // A0 (TH1)
-#define TEMP_0_PIN          1   // A1 (TH2)
-#define TEMP_1_PIN          2   // A2 (TH3)
-#define TEMP_2_PIN          3   // A3 (TH4)
+#define TEMP_BED_PIN        P0_23_A0   // A0 (TH1)
+#define TEMP_0_PIN          P0_24_A1   // A1 (TH2)
+#define TEMP_1_PIN          P0_25_A2   // A2 (TH3)
+#define TEMP_2_PIN          P0_26_A3   // A3 (TH4)
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h

  * MKS SGEN-L pin assignments
  */
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 // 3.3V max when defined as an analog input
 //
-#define TEMP_0_PIN         0   // Analog Input A0 (TH1)
-#define TEMP_BED_PIN       1   // Analog Input A1 (TB)
-#define TEMP_1_PIN         2   // Analog Input A2 (TH2)
+#define TEMP_0_PIN         P0_23_A0   // Analog Input A0 (TH1)
+#define TEMP_BED_PIN       P0_24_A1   // Analog Input A1 (TB)
+#define TEMP_1_PIN         P0_25_A2   // Analog Input A2 (TH2)
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h

 
 // Numbers in parentheses () are the corresponding mega2560 pin numbers
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 //  3.3V max when defined as an analog input
 //
-#define TEMP_0_PIN          0   // A0 (T0) - (67) - TEMP_0_PIN
-#define TEMP_BED_PIN        1   // A1 (T1) - (68) - TEMP_BED_PIN
-#define TEMP_1_PIN          2   // A2 (T2) - (69) - TEMP_1_PIN
-#define TEMP_2_PIN          3   // A3 - (63) - J5-3 & AUX-2
-#define TEMP_3_PIN          4   // A4 - (37) - BUZZER_PIN
-//#define TEMP_4_PIN          5   // A5 - (49) - SD_DETECT_PIN
-//#define ??                  6   // A6 - ( 0)  - RXD0 - J4-4 & AUX-1
-#define FILWIDTH_PIN        7   // A7 - ( 1)  - TXD0 - J4-5 & AUX-1
+#define TEMP_0_PIN          P0_23_A0   // A0 (T0) - (67) - TEMP_0_PIN
+#define TEMP_BED_PIN        P0_24_A1   // A1 (T1) - (68) - TEMP_BED_PIN
+#define TEMP_1_PIN          P0_25_A2   // A2 (T2) - (69) - TEMP_1_PIN
+#define TEMP_2_PIN          P0_26_A3   // A3 - (63) - J5-3 & AUX-2
+#define TEMP_3_PIN          P1_30_A4   // A4 - (37) - BUZZER_PIN
+//#define TEMP_4_PIN          P1_31_A5   // A5 - (49) - SD_DETECT_PIN
+//#define ??                  P0_03_A6   // A6 - ( 0)  - RXD0 - J4-4 & AUX-1
+#define FILWIDTH_PIN        P0_02_A7   // A7 - ( 1)  - TXD0 - J4-5 & AUX-1
 
 //
 // Augmentation for auto-assigning RAMPS plugs

Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h

  * Selena Compact pin assignments
  */
 
-#ifndef TARGET_LPC1768
+#ifndef MCU_LPC1768
   #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif
 
 // Temperature Sensors
 // 3.3V max when defined as an analog input
 //
-#define TEMP_BED_PIN        0   // A0 (TH1)
-#define TEMP_0_PIN          1   // A1 (TH2)
-#define TEMP_1_PIN          2   // A2 (TH3)
+#define TEMP_BED_PIN        P0_23_A0   // A0 (TH1)
+#define TEMP_0_PIN          P0_24_A1   // A1 (TH2)
+#define TEMP_1_PIN          P0_25_A2   // A2 (TH3)
 
 
 //

Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h

  * Azteeg X5 GT pin assignments
  */
 
-#ifndef LPC1769
+#ifndef MCU_LPC1769
   #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
 #endif
 
 #define BOARD_WEBSITE_URL "tinyurl.com/yx8tdqa3"
 
 //
-// Custom CPU Speed 120MHz
-//
-#undef F_CPU
-#define F_CPU 120000000
-
-//
 // Servos
 //
 #define SERVO0_PIN         P1_23
 // Temperature Sensors
 // 3.3V max when defined as an analog input
 //
-#define TEMP_BED_PIN        0   // A0 (TH1)
-#define TEMP_0_PIN          1   // A1 (TH2)
-#define TEMP_1_PIN          2   // A2 (TH3)
+#define TEMP_BED_PIN        P0_23_A0   // A0 (TH1)
+#define TEMP_0_PIN          P0_24_A1   // A1 (TH2)
+#define TEMP_1_PIN          P0_25_A2   // A2 (TH3)
 
 
 //

Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h

  * Azteeg X5 MINI pin assignments
  */
 
-#ifndef LPC1769
+#ifndef MCU_LPC1769
   #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
 #endif
 
 #endif
 
 #ifndef FILWIDTH_PIN
-  #define FILWIDTH_PIN         2   // Analog Input (P0_25)
+  #define FILWIDTH_PIN         P0_25_A2   // Analog Input (P0_25)
 #endif
 
 //
 // Temperature Sensors
 // 3.3V max when defined as an analog input
 //
-#define TEMP_BED_PIN        0   // A0 (TH1)
-#define TEMP_0_PIN          1   // A1 (TH2)
+#define TEMP_BED_PIN        P0_23_A0   // A0 (TH1)
+#define TEMP_0_PIN          P0_24_A1   // A1 (TH2)
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h

  * Azteeg X5 MINI pin assignments
  */
 
-#ifndef LPC1769
+#ifndef MCU_LPC1769
   #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
 #endif
 

Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h

  * Cohesion3D Mini pin assignments
  */
 
-#ifndef LPC1769
+#ifndef MCU_LPC1769
   #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
 #endif
 
 // Analog Inputs
 //  3.3V max when defined as an analog input
 //
-#define TEMP_0_PIN          0   // P0_23
-#define TEMP_BED_PIN        1   // P0_24
+#define TEMP_0_PIN          P0_23_A0   // P0_23
+#define TEMP_BED_PIN        P0_24_A1   // P0_24
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h

  * Cohesion3D ReMix pin assignments
  */
 
-#ifndef LPC1769
+#ifndef MCU_LPC1769
   #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
 #endif
 
 // Analog Inputs
 //  3.3V max when defined as an analog input
 //
-#define TEMP_0_PIN          0   // P0_23
-#define TEMP_BED_PIN        1   // P0_24
-#define TEMP_1_PIN          2   // P0_25
+#define TEMP_0_PIN          P0_23_A0
+#define TEMP_BED_PIN        P0_24_A1
+#define TEMP_1_PIN          P0_25_A2
 #if ENABLED(FILAMENT_WIDTH_SENSOR)
-  #define FILWIDTH_PIN      3   // P0_26
+  #define FILWIDTH_PIN      P0_26_A3
 #else
-  #define TEMP_2_PIN        3   // P0_26
+  #define TEMP_2_PIN        P0_26_A3
 #endif
 
 //

Marlin/src/pins/lpc1769/pins_MKS_SGEN.h

  * MKS SGen pin assignments
  */
 
-#ifndef LPC1769
+#ifndef MCU_LPC1769
   #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
 #endif
 

Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h

  * Smoothieboard pin assignments
  */
 
-#ifndef LPC1769
+#ifndef MCU_LPC1769
   #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
 #endif
 
 #define BOARD_WEBSITE_URL "smoothieware.org/smoothieboard"
 
 //
-// Custom CPU Speed 120MHz
-//
-#undef F_CPU
-#define F_CPU 120000000
-
-//
 // Servos
 //
 #define SERVO0_PIN         P1_23
 // Temperature Sensors
 // 3.3V max when defined as an analog input
 //
-#define TEMP_0_PIN          0   // P0.23 (T1)
-#define TEMP_BED_PIN        1   // P0.24 (T2)
-#define TEMP_1_PIN          2   // P0.25 (T3)
-#define TEMP_2_PIN          3   // P0.26 (T4)
+#define TEMP_0_PIN          P0_23_A0   // (T1)
+#define TEMP_BED_PIN        P0_24_A1   // (T2)
+#define TEMP_1_PIN          P0_25_A2   // (T3)
+#define TEMP_2_PIN          P0_26_A3   // (T4)
 
 //
 // Heaters / Fans

Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h

  * TH3D EZBoard pin assignments
  */
 
-#ifndef LPC1769
+#ifndef MCU_LPC1769
   #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
 #endif
 
 //  3.3V max when defined as an Analog Input!
 //
 #if TEMP_SENSOR_0 == 20         // PT100 Adapter
-  #define TEMP_0_PIN        7   // Analog Input
+  #define TEMP_0_PIN        P0_02_A7   // Analog Input
 #else
-  #define TEMP_0_PIN        0   // Analog Input P0_23
+  #define TEMP_0_PIN        P0_23_A0   // Analog Input P0_23
 #endif
 
-#define TEMP_BED_PIN        1   // Analog Input P0_24
-#define TEMP_1_PIN          2   // Analog Input P0_25
+#define TEMP_BED_PIN        P0_24_A1   // Analog Input P0_24
+#define TEMP_1_PIN          P0_25_A2   // Analog Input P0_25
 
 #if ENABLED(FILAMENT_WIDTH_SENSOR)
-  #define FILWIDTH_PIN      3   // Analog Input P0_26
+  #define FILWIDTH_PIN      P0_26_A3   // Analog Input P0_26
 #else
-  #define TEMP_2_PIN        3   // Analog Input P0_26
+  #define TEMP_2_PIN        P0_26_A3   // Analog Input P0_26
 #endif
 
 //

platformio.ini

 # NXP LPC176x ARM Cortex-M3
 #
 [env:LPC1768]
-platform          = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/master.zip
+platform          = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.0.zip
 framework         = arduino
 board             = nxp_lpc1768
-build_flags       = -DTARGET_LPC1768 -DU8G_HAL_LINKS  -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
+build_flags       = -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
 # debug options for backtrace
 #  -funwind-tables
 #  -mpoke-function-name
 lib_deps          = Servo
   LiquidCrystal
   U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
-  TMCStepper@>=0.5.0,<1.0.0
-  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/master.zip
+  TMCStepper=https://github.com/p3p/TMCStepper/archive/pr_lpctimingfix.zip
+  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/release.zip
   SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
 
 [env:LPC1769]
-platform          = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/master.zip
+platform          = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.0.zip
 framework         = arduino
 board             = nxp_lpc1769
-build_flags       = -DTARGET_LPC1768 -DLPC1769 -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
+build_flags       = -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
 # debug options for backtrace
 #  -funwind-tables
 #  -mpoke-function-name
 lib_deps          = Servo
   LiquidCrystal
   U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
-  TMCStepper@>=0.5.0,<1.0.0
-  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/master.zip
+  TMCStepper=https://github.com/p3p/TMCStepper/archive/pr_lpctimingfix.zip
+  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/release.zip
 
 #
 # Sanguinololu (ATmega644p)