Azteeg X5 Mini support (#13425)

Marlin/Configuration_adv.h

@@ -679,6 +679,7 @@
    *                        A   (A shifted)   B   (B shifted)  IC
    * Smoothie              0x2C (0x58)       0x2D (0x5A)       MCP4451
    * AZTEEG_X3_PRO         0x2C (0x58)       0x2E (0x5C)       MCP4451
+   * AZTEEG_X5_MINI        0x2C (0x58)       0x2E (0x5C)       MCP4451
    * AZTEEG_X5_MINI_WIFI         0x58              0x5C        MCP4451
    * MIGHTYBOARD_REVE      0x2F (0x5E)                         MCP4018
    */

Marlin/src/core/boards.h

@@ -189,10 +189,11 @@
 #define BOARD_COHESION3D_REMIX    1755  // Cohesion3D ReMix
 #define BOARD_COHESION3D_MINI     1756  // Cohesion3D Mini
 #define BOARD_SMOOTHIEBOARD       1757  // Smoothieboard
-#define BOARD_AZTEEG_X5_MINI_WIFI 1758  // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
+#define BOARD_AZTEEG_X5_MINI_WIFI 1758  // Azteeg X5 Mini Wifi (Power outputs: Hotend0, Bed, Fan)
 #define BOARD_BIQU_SKR_V1_1       1759  // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed)
 #define BOARD_BIQU_B300_V1_0      1760  // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
 #define BOARD_BIGTREE_SKR_V1_3    1761  // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
+#define BOARD_AZTEEG_X5_MINI      1762  // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
 
 //
 // SAM3X8E ARM Cortex M3

Marlin/src/feature/digipot/digipot_mcp4451.cpp

@@ -35,6 +35,9 @@
 #if MB(5DPRINT)
   #define DIGIPOT_I2C_FACTOR 117.96
   #define DIGIPOT_I2C_MAX_CURRENT 1.736
+#elif MB(AZTEEG_X5_MINI) || MB(AZTEEG_X5_MINI_WIFI)
+  #define DIGIPOT_I2C_FACTOR 113.5
+  #define DIGIPOT_I2C_MAX_CURRENT 2.0
 #else
   #define DIGIPOT_I2C_FACTOR 106.7
   #define DIGIPOT_I2C_MAX_CURRENT 2.5

Marlin/src/pins/pins.h

@@ -305,39 +305,41 @@
 //
 
 #elif MB(RAMPS_14_RE_ARM_EFB)
-  #include "pins_RAMPS_RE_ARM.h"      // LPC1768                                    env:LPC1768
+  #include "pins_RAMPS_RE_ARM.h"        // LPC1768                                    env:LPC1768
 #elif MB(RAMPS_14_RE_ARM_EEB)
-  #include "pins_RAMPS_RE_ARM.h"      // LPC1768                                    env:LPC1768
+  #include "pins_RAMPS_RE_ARM.h"        // LPC1768                                    env:LPC1768
 #elif MB(RAMPS_14_RE_ARM_EFF)
-  #include "pins_RAMPS_RE_ARM.h"      // LPC1768                                    env:LPC1768
+  #include "pins_RAMPS_RE_ARM.h"        // LPC1768                                    env:LPC1768
 #elif MB(RAMPS_14_RE_ARM_EEF)
-  #include "pins_RAMPS_RE_ARM.h"      // LPC1768                                    env:LPC1768
+  #include "pins_RAMPS_RE_ARM.h"        // LPC1768                                    env:LPC1768
 #elif MB(RAMPS_14_RE_ARM_SF)
-  #include "pins_RAMPS_RE_ARM.h"      // LPC1768                                    env:LPC1768
+  #include "pins_RAMPS_RE_ARM.h"        // LPC1768                                    env:LPC1768
 #elif MB(MKS_SBASE)
-  #include "pins_MKS_SBASE.h"         // LPC1768                                    env:LPC1768
+  #include "pins_MKS_SBASE.h"           // LPC1768                                    env:LPC1768
 #elif MB(AZSMZ_MINI)
-  #include "pins_AZSMZ_MINI.h"        // LPC1768                                    env:LPC1768
+  #include "pins_AZSMZ_MINI.h"          // LPC1768                                    env:LPC1768
 #elif MB(AZTEEG_X5_GT)
-  #include "pins_AZTEEG_X5_GT.h"      // LPC1769                                    env:LPC1769
+  #include "pins_AZTEEG_X5_GT.h"        // LPC1769                                    env:LPC1769
+#elif MB(AZTEEG_X5_MINI)
+  #include "pins_AZTEEG_X5_MINI.h"      // LPC1769                                    env:LPC1769
 #elif MB(AZTEEG_X5_MINI_WIFI)
-  #include "pins_AZTEEG_X5_MINI_WIFI.h" // LPC1769                                  env:LPC1769
+  #include "pins_AZTEEG_X5_MINI_WIFI.h" // LPC1769                                    env:LPC1769
 #elif MB(BIQU_BQ111_A4)
-  #include "pins_BIQU_BQ111_A4.h"     // LPC1768                                    env:LPC1768
+  #include "pins_BIQU_BQ111_A4.h"       // LPC1768                                    env:LPC1768
 #elif MB(SELENA_COMPACT)
-  #include "pins_SELENA_COMPACT.h"    // LPC1768                                    env:LPC1768
+  #include "pins_SELENA_COMPACT.h"      // LPC1768                                    env:LPC1768
 #elif MB(COHESION3D_REMIX)
-  #include "pins_COHESION3D_REMIX.h"  // LPC1769                                    env:LPC1769
+  #include "pins_COHESION3D_REMIX.h"    // LPC1769                                    env:LPC1769
 #elif MB(COHESION3D_MINI)
-  #include "pins_COHESION3D_MINI.h"   // LPC1769                                    env:LPC1769
+  #include "pins_COHESION3D_MINI.h"     // LPC1769                                    env:LPC1769
 #elif MB(SMOOTHIEBOARD)
-  #include "pins_SMOOTHIEBOARD.h"     // LPC1769                                    env:LPC1769
+  #include "pins_SMOOTHIEBOARD.h"       // LPC1769                                    env:LPC1769
 #elif MB(BIQU_SKR_V1_1)
-  #include "pins_BIQU_SKR_V1.1.h"     // LPC1768                                    env:LPC1768
+  #include "pins_BIQU_SKR_V1.1.h"       // LPC1768                                    env:LPC1768
 #elif MB(BIQU_B300_V1_0)
-  #include "pins_BIQU_B300_V1.0.h"    // LPC1768                                    env:LPC1768
+  #include "pins_BIQU_B300_V1.0.h"      // LPC1768                                    env:LPC1768
 #elif MB(BIGTREE_SKR_V1_3)
-  #include "pins_BIGTREE_SKR_V1.3.h"  // LPC1768                                    env:LPC1768
+  #include "pins_BIGTREE_SKR_V1.3.h"    // LPC1768                                    env:LPC1768
 
 //
 // Other 32-bit Boards

Marlin/src/pins/pins_5DPRINT.h

@@ -142,4 +142,6 @@
 #define SDSS               20   // B0
 
 //DIGIPOTS slave addresses
-#define DIGIPOT_I2C_ADDRESS_A 0x2C   // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1)
+#ifndef DIGIPOT_I2C_ADDRESS_A
+  #define DIGIPOT_I2C_ADDRESS_A 0x2C   // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1)
+#endif

Marlin/src/pins/pins_AZTEEG_X3_PRO.h

@@ -48,8 +48,12 @@
 #include "pins_RAMPS.h"
 
 // DIGIPOT slave addresses
-#define DIGIPOT_I2C_ADDRESS_A 0x2C   // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1)
-#define DIGIPOT_I2C_ADDRESS_B 0x2E   // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1)
+#ifndef DIGIPOT_I2C_ADDRESS_A
+  #define DIGIPOT_I2C_ADDRESS_A 0x2C   // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1)
+#endif
+#ifndef DIGIPOT_I2C_ADDRESS_B
+  #define DIGIPOT_I2C_ADDRESS_B 0x2E   // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1)
+#endif
 
 //
 // Servos

Marlin/src/pins/pins_AZTEEG_X5_MINI.h

@@ -0,0 +1,218 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Azteeg X5 MINI pin assignments
+ */
+
+#ifndef LPC1769
+  #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#ifndef BOARD_NAME
+  #define BOARD_NAME        "Azteeg X5 MINI WIFI"
+#endif
+#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
+
+//
+// LED
+//
+#define LED_PIN            P1_18
+
+//
+// Servos
+//
+#define SERVO0_PIN         P1_29
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN         P1_24
+#define Y_STOP_PIN         P1_26
+#define Z_STOP_PIN         P1_28
+
+#ifndef FILWIDTH_PIN
+  #define FILWIDTH_PIN     P2_04
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN         P2_01
+#define X_DIR_PIN          P0_11
+#define X_ENABLE_PIN       P0_10
+
+#define Y_STEP_PIN         P2_02
+#define Y_DIR_PIN          P0_20
+#define Y_ENABLE_PIN       P0_19
+
+#define Z_STEP_PIN         P2_03
+#define Z_DIR_PIN          P0_22
+#define Z_ENABLE_PIN       P0_21
+
+#define E0_STEP_PIN        P2_00
+#define E0_DIR_PIN         P0_05
+#define E0_ENABLE_PIN      P0_04
+
+//
+// DIGIPOT slave addresses
+//
+#ifndef DIGIPOT_I2C_ADDRESS_A
+  #define DIGIPOT_I2C_ADDRESS_A 0x2C   // unshifted slave address for first DIGIPOT
+#endif
+
+#ifndef DIGIPOT_I2C_ADDRESS_B
+  #define DIGIPOT_I2C_ADDRESS_B 0x2E   // unshifted slave address for second DIGIPOT
+#endif
+
+//
+// Temperature Sensors
+// 3.3V max when defined as an analog input
+//
+#define TEMP_BED_PIN        0   // A0 (TH1)
+#define TEMP_0_PIN          1   // A1 (TH2)
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN     P2_07
+#define HEATER_0_PIN       P2_05
+#ifndef FAN_PIN
+  #define FAN_PIN          P0_26
+#endif
+#define FAN1_PIN           P1_25
+
+//
+// Display
+//
+#if ENABLED(ULTRA_LCD)
+
+  #if ENABLED(CR10_STOCKDISPLAY)
+
+    // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
+    // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
+    // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
+    // Requires REVERSE_ENCODER_DIRECTION in Configuration.h
+
+    #define BEEPER_PIN     P2_11   // J3-3 & AUX-4
+
+    #define BTN_EN1        P0_16   // J3-7 & AUX-4
+    #define BTN_EN2        P1_23   // J3-5 & AUX-4
+    #define BTN_ENC        P3_25   // J3-4 & AUX-4
+
+    #define LCD_PINS_RS    P0_15   // J3-9 & AUX-4 (CS)
+    #define LCD_PINS_ENABLE P0_18  // J3-10 & AUX-3 (SID, MOSI)
+    #define LCD_PINS_D4    P2_06   // J3-8 & AUX-3 (SCK, CLK)
+
+  #else
+
+    #define BTN_EN1        P3_26   // (31) J3-2 & AUX-4
+    #define BTN_EN2        P3_25   // (33) J3-4 & AUX-4
+    #define BTN_ENC        P2_11   // (35) J3-3 & AUX-4
+
+    #define SD_DETECT_PIN  P1_31   // (49) not 5V tolerant   J3-1 & AUX-3
+    #define KILL_PIN       P1_22   // (41) J5-4 & AUX-4
+    #define LCD_PINS_RS    P0_16   // (16) J3-7 & AUX-4
+    #define LCD_SDSS       P0_16   // (16) J3-7 & AUX-4
+    #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
+    #define LCD_PINS_ENABLE P0_18  // (51) (MOSI) J3-10 & AUX-3
+    #define LCD_PINS_D4    P0_15   // (52) (SCK)  J3-9 & AUX-3
+
+    #define DOGLCD_A0      P2_06   // (59) J3-8 & AUX-2
+
+    #if ENABLED(REPRAPWORLD_KEYPAD)
+      #define SHIFT_OUT    P0_18   // (51)  (MOSI) J3-10 & AUX-3
+      #define SHIFT_CLK    P0_15   // (52)  (SCK)  J3-9 & AUX-3
+      #define SHIFT_LD     P1_31   // (49)  not 5V tolerant   J3-1 & AUX-3
+    #elif DISABLED(NEWPANEL)
+      //#define SHIFT_OUT  P2_11   // (35)  J3-3 & AUX-4
+      //#define SHIFT_CLK  P3_26   // (31)  J3-2 & AUX-4
+      //#define SHIFT_LD   P3_25   // (33)  J3-4 & AUX-4
+      //#define SHIFT_EN   P1_22   // (41)  J5-4 & AUX-4
+    #endif
+
+    #if ANY(VIKI2, miniVIKI)
+      //#define LCD_SCREEN_ROT_180
+
+      #define BEEPER_PIN   P1_30   // (37) may change if cable changes
+      #define DOGLCD_CS    P0_26   // (63) J5-3 & AUX-2
+      #define DOGLCD_SCK   SCK_PIN
+      #define DOGLCD_MOSI  MOSI_PIN
+
+      #define STAT_LED_BLUE_PIN P0_26   // (63)  may change if cable changes
+      #define STAT_LED_RED_PIN  P1_21   // ( 6)  may change if cable changes
+    #else
+      #if ENABLED(ULTIPANEL)
+        #define LCD_PINS_D5 P1_17   // (71) ENET_MDIO
+        #define LCD_PINS_D6 P1_14   // (73) ENET_RX_ER
+        #define LCD_PINS_D7 P1_10   // (75) ENET_RXD1
+      #endif
+      #define BEEPER_PIN   P1_30   // (37) not 5V tolerant
+      #define DOGLCD_CS    P0_16   // (16)
+    #endif
+
+    #if ENABLED(MINIPANEL)
+      // GLCD features
+      // Uncomment screen orientation
+      //#define LCD_SCREEN_ROT_90
+      //#define LCD_SCREEN_ROT_180
+      //#define LCD_SCREEN_ROT_270
+    #endif
+
+  #endif
+
+#endif // ULTRA_LCD
+
+//
+// SD Support
+//
+//#define USB_SD_DISABLED     // Disable host access to SD card as mass storage device through USB
+//#define USB_SD_ONBOARD      // Enable host access to SD card as mass storage device through USB
+
+//#define LPC_SD_LCD          // Marlin uses the SD drive attached to the LCD
+#define LPC_SD_ONBOARD        // Marlin uses the SD drive on the control board.  There is no SD detect pin
+                              // for the onboard card.  Init card from LCD menu or send M21 whenever printer
+                              // is powered on to enable SD access.
+
+#if ENABLED(LPC_SD_LCD)
+
+  #define SCK_PIN            P0_15
+  #define MISO_PIN           P0_17
+  #define MOSI_PIN           P0_18
+  #define SS_PIN             P1_23   // Chip select for SD card used by Marlin
+  #define ONBOARD_SD_CS      P0_06   // Chip select for "System" SD card
+
+#elif ENABLED(LPC_SD_ONBOARD)
+
+  #if ENABLED(USB_SD_ONBOARD)
+    // When sharing the SD card with a PC we want the menu options to
+    // mount/unmount the card and refresh it. So we disable card detect.
+    #define SHARED_SD_CARD
+    #undef SD_DETECT_PIN // there is also no detect pin for the onboard card
+  #endif
+  #define SCK_PIN            P0_07
+  #define MISO_PIN           P0_08
+  #define MOSI_PIN           P0_09
+  #define SS_PIN             P0_06   // Chip select for SD card used by Marlin
+  #define ONBOARD_SD_CS      P0_06   // Chip select for "System" SD card
+
+#endif

Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h

@@ -29,183 +29,15 @@
 #endif
 
 #define BOARD_NAME        "Azteeg X5 MINI WIFI"
-#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
-
-//
-// LED
-//
-#define LED_PIN            P1_18
-
-//
-// Servos
-//
-#define SERVO0_PIN         P1_29
-
-//
-// Limit Switches
-//
-#define X_STOP_PIN         P1_24
-#define Y_STOP_PIN         P1_26
-#define Z_STOP_PIN         P1_28
-
-#ifndef FILWIDTH_PIN
-  #define FILWIDTH_PIN     P2_04
-#endif
-
-//
-// Steppers
-//
-#define X_STEP_PIN         P2_01
-#define X_DIR_PIN          P0_11
-#define X_ENABLE_PIN       P0_10
-
-#define Y_STEP_PIN         P2_02
-#define Y_DIR_PIN          P0_20
-#define Y_ENABLE_PIN       P0_19
-
-#define Z_STEP_PIN         P2_03
-#define Z_DIR_PIN          P0_22
-#define Z_ENABLE_PIN       P0_21
-
-#define E0_STEP_PIN        P2_00
-#define E0_DIR_PIN         P0_05
-#define E0_ENABLE_PIN      P0_04
 
 //
 // DIGIPOT slave addresses
 //
-#define DIGIPOT_I2C_ADDRESS_A 0x58   // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1)
-#define DIGIPOT_I2C_ADDRESS_B 0x5C   // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1)
-
-//
-// Temperature Sensors
-// 3.3V max when defined as an analog input
-//
-#define TEMP_BED_PIN        0   // A0 (TH1)
-#define TEMP_0_PIN          1   // A1 (TH2)
-
-//
-// Heaters / Fans
-//
-#define HEATER_BED_PIN     P2_07
-#define HEATER_0_PIN       P2_05
-#ifndef FAN_PIN
-  #define FAN_PIN          P0_26
+#ifndef DIGIPOT_I2C_ADDRESS_A
+  #define DIGIPOT_I2C_ADDRESS_A 0x58   // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1)
 #endif
-#define FAN1_PIN           P1_25
-
-//
-// Display
-//
-#if ENABLED(ULTRA_LCD)
-
-  #if ENABLED(CR10_STOCKDISPLAY)
-
-    // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
-    // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
-    // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
-    // Requires REVERSE_ENCODER_DIRECTION in Configuration.h
-
-    #define BEEPER_PIN     P2_11   // J3-3 & AUX-4
-
-    #define BTN_EN1        P0_16   // J3-7 & AUX-4
-    #define BTN_EN2        P1_23   // J3-5 & AUX-4
-    #define BTN_ENC        P3_25   // J3-4 & AUX-4
-
-    #define LCD_PINS_RS    P0_15   // J3-9 & AUX-4 (CS)
-    #define LCD_PINS_ENABLE P0_18  // J3-10 & AUX-3 (SID, MOSI)
-    #define LCD_PINS_D4    P2_06   // J3-8 & AUX-3 (SCK, CLK)
-
-  #else
-
-    #define BTN_EN1        P3_26   // (31) J3-2 & AUX-4
-    #define BTN_EN2        P3_25   // (33) J3-4 & AUX-4
-    #define BTN_ENC        P2_11   // (35) J3-3 & AUX-4
-
-    #define SD_DETECT_PIN  P1_31   // (49) not 5V tolerant   J3-1 & AUX-3
-    #define KILL_PIN       P1_22   // (41) J5-4 & AUX-4
-    #define LCD_PINS_RS    P0_16   // (16) J3-7 & AUX-4
-    #define LCD_SDSS       P0_16   // (16) J3-7 & AUX-4
-    #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
-    #define LCD_PINS_ENABLE P0_18  // (51) (MOSI) J3-10 & AUX-3
-    #define LCD_PINS_D4    P0_15   // (52) (SCK)  J3-9 & AUX-3
-
-    #define DOGLCD_A0      P2_06   // (59) J3-8 & AUX-2
-
-    #if ENABLED(REPRAPWORLD_KEYPAD)
-      #define SHIFT_OUT    P0_18   // (51)  (MOSI) J3-10 & AUX-3
-      #define SHIFT_CLK    P0_15   // (52)  (SCK)  J3-9 & AUX-3
-      #define SHIFT_LD     P1_31   // (49)  not 5V tolerant   J3-1 & AUX-3
-    #elif DISABLED(NEWPANEL)
-      //#define SHIFT_OUT  P2_11   // (35)  J3-3 & AUX-4
-      //#define SHIFT_CLK  P3_26   // (31)  J3-2 & AUX-4
-      //#define SHIFT_LD   P3_25   // (33)  J3-4 & AUX-4
-      //#define SHIFT_EN   P1_22   // (41)  J5-4 & AUX-4
-    #endif
-
-    #if ANY(VIKI2, miniVIKI)
-      //#define LCD_SCREEN_ROT_180
-
-      #define BEEPER_PIN   P1_30   // (37) may change if cable changes
-      #define DOGLCD_CS    P0_26   // (63) J5-3 & AUX-2
-      #define DOGLCD_SCK   SCK_PIN
-      #define DOGLCD_MOSI  MOSI_PIN
-
-      #define STAT_LED_BLUE_PIN P0_26   // (63)  may change if cable changes
-      #define STAT_LED_RED_PIN  P1_21   // ( 6)  may change if cable changes
-    #else
-      #if ENABLED(ULTIPANEL)
-        #define LCD_PINS_D5 P1_17   // (71) ENET_MDIO
-        #define LCD_PINS_D6 P1_14   // (73) ENET_RX_ER
-        #define LCD_PINS_D7 P1_10   // (75) ENET_RXD1
-      #endif
-      #define BEEPER_PIN   P1_30   // (37) not 5V tolerant
-      #define DOGLCD_CS    P0_16   // (16)
-    #endif
-
-    #if ENABLED(MINIPANEL)
-      // GLCD features
-      // Uncomment screen orientation
-      //#define LCD_SCREEN_ROT_90
-      //#define LCD_SCREEN_ROT_180
-      //#define LCD_SCREEN_ROT_270
-    #endif
-
-  #endif
-
-#endif // ULTRA_LCD
-
-//
-// SD Support
-//
-//#define USB_SD_DISABLED     // Disable host access to SD card as mass storage device through USB
-//#define USB_SD_ONBOARD      // Enable host access to SD card as mass storage device through USB
-
-//#define LPC_SD_LCD          // Marlin uses the SD drive attached to the LCD
-#define LPC_SD_ONBOARD        // Marlin uses the SD drive on the control board.  There is no SD detect pin
-                              // for the onboard card.  Init card from LCD menu or send M21 whenever printer
-                              // is powered on to enable SD access.
-
-#if ENABLED(LPC_SD_LCD)
-
-  #define SCK_PIN            P0_15
-  #define MISO_PIN           P0_17
-  #define MOSI_PIN           P0_18
-  #define SS_PIN             P1_23   // Chip select for SD card used by Marlin
-  #define ONBOARD_SD_CS      P0_06   // Chip select for "System" SD card
-
-#elif ENABLED(LPC_SD_ONBOARD)
-
-  #if ENABLED(USB_SD_ONBOARD)
-    // When sharing the SD card with a PC we want the menu options to
-    // mount/unmount the card and refresh it. So we disable card detect.
-    #define SHARED_SD_CARD
-    #undef SD_DETECT_PIN // there is also no detect pin for the onboard card
-  #endif
-  #define SCK_PIN            P0_07
-  #define MISO_PIN           P0_08
-  #define MOSI_PIN           P0_09
-  #define SS_PIN             P0_06   // Chip select for SD card used by Marlin
-  #define ONBOARD_SD_CS      P0_06   // Chip select for "System" SD card
-
+#ifndef DIGIPOT_I2C_ADDRESS_B
+  #define DIGIPOT_I2C_ADDRESS_B 0x5C   // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1)
 #endif
+
+#include "pins_AZTEEG_X5_MINI.h"

Marlin/src/pins/pins_MIGHTYBOARD_REVE.h

@@ -104,7 +104,9 @@
 #define DIGIPOTS_I2C_SDA_E0 27   // A5
 #define DIGIPOTS_I2C_SDA_E1 77   // J6
 
-#define DIGIPOT_I2C_ADDRESS_A 0x2F   // unshifted slave address (5E <- 2F << 1)
+#ifndef DIGIPOT_I2C_ADDRESS_A
+  #define DIGIPOT_I2C_ADDRESS_A 0x2F   // unshifted slave address (5E <- 2F << 1)
+#endif
 
 //
 // Temperature Sensors