Label analog pins in a similar way

Some other pins formatting also

Marlin/pins_5DPRINT.h

@@ -75,8 +75,8 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          1  // Analog
-#define TEMP_BED_PIN        0  // Analog
+#define TEMP_0_PIN          1   // Analog Input
+#define TEMP_BED_PIN        0   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_99.h

@@ -55,8 +55,8 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          6   // ANALOG INPUT - NOT DIGITAL OUTPUT
-#define TEMP_BED_PIN       10
+#define TEMP_0_PIN          6   // Analog Input
+#define TEMP_BED_PIN       10   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_A4JP.h

@@ -40,7 +40,7 @@
 
 #define SLED_PIN -1
 
-#define FILWIDTH_PIN        3  // ANALOG NUMBERING
+#define FILWIDTH_PIN        3   // Analog Input
 
 /************************************************
  * Rambo pin assignments old
@@ -112,8 +112,8 @@
 #define FAN0_PIN             6
 #define FAN1_PIN             2
 
-#define TEMP_0_PIN           0
-#define TEMP_BED_PIN         7
+#define TEMP_0_PIN           0   // Analog Input
+#define TEMP_BED_PIN         7   // Analog Input
 
 #define SDSS                53
 #define LED_PIN             13

Marlin/pins_BAM_DICE_DUE.h

@@ -34,5 +34,5 @@
 
 #undef TEMP_0_PIN
 #undef TEMP_1_PIN
-#define TEMP_0_PIN          9 // ANALOG NUMBERING
-#define TEMP_1_PIN         11 // ANALOG NUMBERING
+#define TEMP_0_PIN          9   // Analog Input
+#define TEMP_1_PIN         11   // Analog Input

Marlin/pins_BRAINWAVE.h

@@ -68,8 +68,8 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          7  // Extruder / Analog pin numbering
-#define TEMP_BED_PIN        6  // Bed / Analog pin numbering
+#define TEMP_0_PIN          7   // Analog Input
+#define TEMP_BED_PIN        6   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_BRAINWAVE_PRO.h

@@ -78,9 +78,9 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          2  // Extruder / Analog pin numbering
-#define TEMP_1_PIN          1  // Spare / Analog pin numbering
-#define TEMP_BED_PIN        0  // Bed / Analog pin numbering
+#define TEMP_0_PIN          2   // Analog Input
+#define TEMP_1_PIN          1   // Analog Input
+#define TEMP_BED_PIN        0   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_CHEAPTRONIC.h

@@ -64,9 +64,9 @@
 //
 // Temperature sensors
 //
-#define TEMP_0_PIN         15
-#define TEMP_1_PIN         14
-#define TEMP_BED_PIN       13
+#define TEMP_0_PIN         15   // Analog Input
+#define TEMP_1_PIN         14   // Analog Input
+#define TEMP_BED_PIN       13   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_CNCONTROLS_11.h

@@ -51,11 +51,11 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          0  // ANALOG INPUT !!
-#define TEMP_1_PIN          3  // 3 for tool2 -> 2 for chambertemp
-#define TEMP_2_PIN          2  // 9 for tool3 -> 2 for chambertemp
-#define TEMP_3_PIN         11  // 11 for tool4 -> 2 for chambertemp
-#define TEMP_BED_PIN        1  // ANALOG INPUT !!
+#define TEMP_0_PIN          0   // Analog Input
+#define TEMP_1_PIN          3   // Analog Input.  3 for tool2 -> 2 for chambertemp
+#define TEMP_2_PIN          2   // Analog Input.  9 for tool3 -> 2 for chambertemp
+#define TEMP_3_PIN         11   // Analog Input. 11 for tool4 -> 2 for chambertemp
+#define TEMP_BED_PIN        1   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_CNCONTROLS_12.h

@@ -51,12 +51,12 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          0  // ANALOG INPUT !!
-#define TEMP_1_PIN          9  // 9 for tool2 -> 13 for chambertemp
-#define TEMP_2_PIN         13  // 10 for tool3 -> 13 for chambertemp
-#define TEMP_3_PIN         11  // 11 for tool4 -> 13 for chambertemp
-#define TEMP_BED_PIN       14  // ANALOG INPUT !!
-//#define TEMP_CHAMBER_PIN   13  // ANALOG INPUT !!
+#define TEMP_0_PIN          0   // Analog Input
+#define TEMP_1_PIN          9   // Analog Input.  9 for tool2 -> 13 for chambertemp
+#define TEMP_2_PIN         13   // Analog Input. 10 for tool3 -> 13 for chambertemp
+#define TEMP_3_PIN         11   // Analog Input. 11 for tool4 -> 13 for chambertemp
+#define TEMP_BED_PIN       14   // Analog Input
+//#define TEMP_CHAMBER_PIN   13   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_ELEFU_3.h

@@ -77,10 +77,10 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          3 // ANALOG NUMBERING
-#define TEMP_1_PIN          2 // ANALOG NUMBERING
-#define TEMP_2_PIN          1 // ANALOG NUMBERING
-#define TEMP_BED_PIN        0 // ANALOG NUMBERING
+#define TEMP_0_PIN          3   // Analog Input
+#define TEMP_1_PIN          2   // Analog Input
+#define TEMP_2_PIN          1   // Analog Input
+#define TEMP_BED_PIN        0   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_GEN3_MONOLITHIC.h

@@ -60,7 +60,7 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          0
+#define TEMP_0_PIN          0   // Analog Input
 
 //
 // Heaters

Marlin/pins_GEN3_PLUS.h

@@ -61,8 +61,8 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          0   // ANALOG INPUT (pin 33 extruder)
-#define TEMP_BED_PIN        5   // ANALOG INPUT (pin 34 bed)
+#define TEMP_0_PIN          0   // Analog Input (pin 33 extruder)
+#define TEMP_BED_PIN        5   // Analog Input (pin 34 bed)
 
 //
 // Heaters

Marlin/pins_GEN6.h

@@ -56,23 +56,23 @@
 #define Z_DIR_PIN          28
 #define Z_ENABLE_PIN       29
 
-#define E0_STEP_PIN         4    //Edited @ EJE Electronics 20100715
-#define E0_DIR_PIN          2    //Edited @ EJE Electronics 20100715
-#define E0_ENABLE_PIN       3    //Added @ EJE Electronics 20100715
+#define E0_STEP_PIN         4   //Edited @ EJE Electronics 20100715
+#define E0_DIR_PIN          2   //Edited @ EJE Electronics 20100715
+#define E0_ENABLE_PIN       3   //Added @ EJE Electronics 20100715
 
 //
 // Temperature Sensor
 //
-#define TEMP_0_PIN          5    //changed @ rkoeppl 20110410
+#define TEMP_0_PIN          5   // Analog Input
 
 //
 // Heaters
 //
-#define HEATER_0_PIN       14    //changed @ rkoeppl 20110410
+#define HEATER_0_PIN       14   //changed @ rkoeppl 20110410
 
 #if !MB(GEN6)
-  #define HEATER_BED_PIN    1    //changed @ rkoeppl 20110410
-  #define TEMP_BED_PIN      0    //changed @ rkoeppl 20110410
+  #define HEATER_BED_PIN    1   //changed @ rkoeppl 20110410
+  #define TEMP_BED_PIN      0   // Analog Input
 #endif
 
 //

Marlin/pins_GEN7_12.h

@@ -73,8 +73,8 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          1
-#define TEMP_BED_PIN        2
+#define TEMP_0_PIN          1   // Analog Input
+#define TEMP_BED_PIN        2   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_GEN7_14.h

@@ -32,40 +32,49 @@
 
 #define GEN7_VERSION 14 // v1.4
 
-//x axis pins
-#define X_STEP_PIN 29
-#define X_DIR_PIN 28
-#define X_ENABLE_PIN 25
-#define X_STOP_PIN 0
+//
+// Limit switches
+//
+#define X_STOP_PIN          0
+#define Y_STOP_PIN          1
+#define Z_STOP_PIN          2
 
-//y axis pins
-#define Y_STEP_PIN 27
-#define Y_DIR_PIN 26
-#define Y_ENABLE_PIN 25
-#define Y_STOP_PIN 1
+//
+// Steppers
+//
+#define X_STEP_PIN         29
+#define X_DIR_PIN          28
+#define X_ENABLE_PIN       25
 
-//z axis pins
-#define Z_STEP_PIN 23
-#define Z_DIR_PIN 22
-#define Z_ENABLE_PIN 25
-#define Z_STOP_PIN 2
+#define Y_STEP_PIN         27
+#define Y_DIR_PIN          26
+#define Y_ENABLE_PIN       25
 
-//extruder pins
-#define E0_STEP_PIN 19
-#define E0_DIR_PIN 18
-#define E0_ENABLE_PIN 25
+#define Z_STEP_PIN         23
+#define Z_DIR_PIN          22
+#define Z_ENABLE_PIN       25
 
-#define TEMP_0_PIN 1
-#define TEMP_BED_PIN 0
+#define E0_STEP_PIN        19
+#define E0_DIR_PIN         18
+#define E0_ENABLE_PIN      25
 
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN          1   // Analog Input
+#define TEMP_BED_PIN        0   // Analog Input
+
+//
+// Heaters
+//
 #define HEATER_0_PIN 4
 #define HEATER_BED_PIN 3
 
 #define PS_ON_PIN 15
 
-//our pin for debugging.
+// A pin for debugging
 #define DEBUG_PIN 0
 
-//our RS485 pins
+// RS485 pins
 #define TX_ENABLE_PIN 12
 #define RX_ENABLE_PIN 13

Marlin/pins_GEN7_CUSTOM.h

@@ -33,58 +33,66 @@
 
 #define BOARD_NAME      "Gen7 Custom"
 
-//x axis pins
-#define X_STEP_PIN      21                  // different from standard GEN7
-#define X_DIR_PIN       20                  // different from standard GEN7
-#define X_ENABLE_PIN    24
+//
+// Limit Switches
+//
 #define X_STOP_PIN       0
+#define Y_STOP_PIN       1
+#define Z_STOP_PIN       2
+
+//
+// Steppers
+//
+#define X_STEP_PIN      21   // different from standard GEN7
+#define X_DIR_PIN       20   // different from standard GEN7
+#define X_ENABLE_PIN    24
 
-//y axis pins
 #define Y_STEP_PIN      23
 #define Y_DIR_PIN       22
 #define Y_ENABLE_PIN    24
-#define Y_STOP_PIN       1
 
-//z axis pins
 #define Z_STEP_PIN      26
 #define Z_DIR_PIN       25
 #define Z_ENABLE_PIN    24
-#define Z_STOP_PIN       2
 
-//extruder pins
 #define E0_STEP_PIN     28
 #define E0_DIR_PIN      27
 #define E0_ENABLE_PIN   24
 
-#define TEMP_0_PIN       2
-#define TEMP_BED_PIN     1   // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN       2   // Analog Input
+#define TEMP_BED_PIN     1   // Analog Input (pin 34 bed)
 
+//
+// Heaters
+//
 #define HEATER_0_PIN     4
 #define HEATER_BED_PIN   3  // (bed)
 
 #define SDSS            31                  // SCL pin of I2C header || CS Pin for SD Card support
 
 #define PS_ON_PIN       19
-//our pin for debugging.
 
+// A pin for debugging
 #define DEBUG_PIN       -1
 
-//our RS485 pins
-//#define TX_ENABLE_PIN       12
-//#define RX_ENABLE_PIN       13
-
-#define BEEPER_PIN       -1
+#define BEEPER_PIN      -1
 
-//Pins for 4bit LCD Support
-#define LCD_PINS_RS 18
+// 4bit LCD Support
+#define LCD_PINS_RS     18
 #define LCD_PINS_ENABLE 17
-#define LCD_PINS_D4 16
-#define LCD_PINS_D5 15
-#define LCD_PINS_D6 13
-#define LCD_PINS_D7 14
-
-//buttons are directly attached
-#define BTN_EN1 11
-#define BTN_EN2 10
-#define BTN_ENC 12
-
+#define LCD_PINS_D4     16
+#define LCD_PINS_D5     15
+#define LCD_PINS_D6     13
+#define LCD_PINS_D7     14
+
+// Buttons are directly attached
+#define BTN_EN1         11
+#define BTN_EN2         10
+#define BTN_ENC         12
+
+// RS485 pins
+//#define TX_ENABLE_PIN   12
+//#define RX_ENABLE_PIN   13

Marlin/pins_LEAPFROG.h

@@ -74,9 +74,9 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN         13 //D27   // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
-#define TEMP_1_PIN         15 // 1
-#define TEMP_BED_PIN       14 // 1,2 or I2C
+#define TEMP_0_PIN         13   // Analog Input (D27)
+#define TEMP_1_PIN         15   // Analog Input (1)
+#define TEMP_BED_PIN       14   // Analog Input (1,2 or I2C)
 
 //
 // Heaters / Fans

Marlin/pins_MEGACONTROLLER.h

@@ -92,23 +92,23 @@
 // Temperature Sensors
 //
 #if TEMP_SENSOR_0 == -1
-  #define TEMP_0_PIN        4 // ANALOG NUMBERING
+  #define TEMP_0_PIN        4   // Analog Input
 #else
-  #define TEMP_0_PIN        0 // ANALOG NUMBERING
+  #define TEMP_0_PIN        0   // Analog Input
 #endif
 
 #if TEMP_SENSOR_1 == -1
-  #define TEMP_1_PIN        5 // ANALOG NUMBERING
+  #define TEMP_1_PIN        5   // Analog Input
 #else
-  #define TEMP_1_PIN        2 // ANALOG NUMBERING
+  #define TEMP_1_PIN        2   // Analog Input
 #endif
 
-#define TEMP_2_PIN          3 // ANALOG NUMBERING
+#define TEMP_2_PIN          3   // Analog Input
 
 #if TEMP_SENSOR_BED == -1
-  #define TEMP_BED_PIN      6 // ANALOG NUMBERING
+  #define TEMP_BED_PIN      6   // Analog Input
 #else
-  #define TEMP_BED_PIN      1 // ANALOG NUMBERING
+  #define TEMP_BED_PIN      1   // Analog Input
 #endif
 
 //

Marlin/pins_MEGATRONICS.h

@@ -82,12 +82,12 @@
 // Temperature Sensors
 //
 #if TEMP_SENSOR_0 == -1
-  #define TEMP_0_PIN        8   // ANALOG NUMBERING
+  #define TEMP_0_PIN        8   // Analog Input
 #else
-  #define TEMP_0_PIN       13   // ANALOG NUMBERING
+  #define TEMP_0_PIN       13   // Analog Input
 #endif
-#define TEMP_1_PIN         15   // ANALOG NUMBERING
-#define TEMP_BED_PIN       14   // ANALOG NUMBERING
+#define TEMP_1_PIN         15   // Analog Input
+#define TEMP_BED_PIN       14   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_MEGATRONICS_2.h

@@ -86,21 +86,21 @@
 // Temperature Sensors
 //
 #if TEMP_SENSOR_0 == -1
-  #define TEMP_0_PIN        4 // ANALOG NUMBERING
+  #define TEMP_0_PIN        4   // Analog Input
 #else
-  #define TEMP_0_PIN       13 // ANALOG NUMBERING
+  #define TEMP_0_PIN       13   // Analog Input
 #endif
 
 #if TEMP_SENSOR_1 == -1
-  #define TEMP_1_PIN        8 // ANALOG NUMBERING
+  #define TEMP_1_PIN        8   // Analog Input
 #else
-  #define TEMP_1_PIN       15 // ANALOG NUMBERING
+  #define TEMP_1_PIN       15   // Analog Input
 #endif
 
 #if TEMP_SENSOR_BED == -1
-  #define TEMP_BED_PIN      8 // ANALOG NUMBERING
+  #define TEMP_BED_PIN      8   // Analog Input
 #else
-  #define TEMP_BED_PIN     14 // ANALOG NUMBERING
+  #define TEMP_BED_PIN     14   // Analog Input
 #endif
 
 //

Marlin/pins_MEGATRONICS_3.h

@@ -102,24 +102,24 @@
 // Temperature Sensors
 //
 #if TEMP_SENSOR_0 == -1
-  #define TEMP_0_PIN       11 // ANALOG NUMBERING
+  #define TEMP_0_PIN       11   // Analog Input
 #else
-  #define TEMP_0_PIN       15 // ANALOG NUMBERING
+  #define TEMP_0_PIN       15   // Analog Input
 #endif
 #if TEMP_SENSOR_1 == -1
-  #define TEMP_1_PIN       10 // ANALOG NUMBERING
+  #define TEMP_1_PIN       10   // Analog Input
 #else
-  #define TEMP_1_PIN       13 // ANALOG NUMBERING
+  #define TEMP_1_PIN       13   // Analog Input
 #endif
 #if TEMP_SENSOR_2 == -1
-  #define TEMP_2_PIN        9 // ANALOG NUMBERING
+  #define TEMP_2_PIN        9   // Analog Input
 #else
-  #define TEMP_2_PIN       12 // ANALOG NUMBERING
+  #define TEMP_2_PIN       12   // Analog Input
 #endif
 #if TEMP_SENSOR_BED == -1
-  #define TEMP_BED_PIN      8 // ANALOG NUMBERING
+  #define TEMP_BED_PIN      8   // Analog Input
 #else
-  #define TEMP_BED_PIN     14 // ANALOG NUMBERING
+  #define TEMP_BED_PIN     14   // Analog Input
 #endif
 
 //

Marlin/pins_MINIRAMBO.h

@@ -89,9 +89,9 @@
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN          0
-#define TEMP_1_PIN          1
-#define TEMP_BED_PIN        2
+#define TEMP_0_PIN          0   // Analog Input
+#define TEMP_1_PIN          1   // Analog Input
+#define TEMP_BED_PIN        2   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_MINITRONICS.h

@@ -74,9 +74,9 @@
 #define SDSS               16
 #define LED_PIN            46
 
-#define TEMP_0_PIN          7 // ANALOG NUMBERING
-#define TEMP_1_PIN          6 // ANALOG NUMBERING
-#define TEMP_BED_PIN        6 // ANALOG NUMBERING
+#define TEMP_0_PIN          7   // Analog Input
+#define TEMP_1_PIN          6   // Analog Input
+#define TEMP_BED_PIN        6   // Analog Input
 
 //
 // Heaters / Fans

Marlin/pins_OMCA.h

@@ -98,9 +98,9 @@
 #define HEATER_0_PIN        3 // DONE PWM on RIGHT connector
 #define HEATER_BED_PIN      4
 
-#define TEMP_0_PIN          0 // ANALOG INPUT NUMBERING
-#define TEMP_1_PIN          1 // ANALOG
-#define TEMP_BED_PIN        2 // 1,2 or I2C
+#define TEMP_0_PIN          0   // Analog Input
+#define TEMP_1_PIN          1   // Analog Input
+#define TEMP_BED_PIN        2   // Analog Input (1,2 or I2C)
 
 #define I2C_SCL            16
 #define I2C_SDA            17

Marlin/pins_OMCA_A.h

@@ -56,20 +56,27 @@
 
 #define BOARD_NAME         "Alpha OMCA"
 
+//
+// Limit Switches
+//
+#define X_STOP_PIN          0
+#define Y_STOP_PIN          1
+#define Z_STOP_PIN          2
+
+//
+// Steppers
+//
 #define X_STEP_PIN         21
 #define X_DIR_PIN          20
 #define X_ENABLE_PIN       24
-#define X_STOP_PIN          0
 
 #define Y_STEP_PIN         23
 #define Y_DIR_PIN          22
 #define Y_ENABLE_PIN       24
-#define Y_STOP_PIN          1
 
 #define Z_STEP_PIN         26
 #define Z_DIR_PIN          25
 #define Z_ENABLE_PIN       24
-#define Z_STOP_PIN          2
 
 #define E0_STEP_PIN        28
 #define E0_DIR_PIN         27
@@ -83,10 +90,17 @@
 #define E2_DIR_PIN         -1 // 16
 #define E2_ENABLE_PIN      24
 
-#define SDSS               11
-#define FAN_PIN             3
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN          0   // Analog Input (D27)
 
+//
+// Heaters / Fans
+//
 #define HEATER_0_PIN        4
-#define TEMP_0_PIN          0 //D27   // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+#define FAN_PIN             3
+
+#define SDSS               11
 
 /*  Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31)  */

Marlin/pins_PRINTRBOARD.h

@@ -79,10 +79,11 @@
   #define Y_STOP_PIN        8 // Ystop in Ystop socket
 #endif
 #define Z_STOP_PIN         36
-#define TEMP_0_PIN          1  // Extruder / Analog pin numbering
-#define TEMP_BED_PIN        0  // Bed / Analog pin numbering
 
-#define FILWIDTH_PIN        2  // ANALOG NUMBERING
+#define TEMP_0_PIN          1   // Analog Input
+#define TEMP_BED_PIN        0   // Analog Input
+
+#define FILWIDTH_PIN        2   // Analog Input
 
 ////LCD Pin Setup////