New Feature: LED_CONTROL_MENU

Marlin/Configuration_adv.h

@@ -482,6 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+
+      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+    #endif
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/default/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h

@@ -483,6 +483,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -483,6 +483,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -471,6 +471,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -495,6 +495,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -483,6 +483,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -489,6 +489,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -483,6 +483,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/src/feature/leds/leds.cpp

@@ -30,6 +30,32 @@
 
 #include "leds.h"
 
+#if ENABLED(LED_CONTROL_MENU)
+  #if ENABLED(LED_COLOR_PRESETS)
+uint8_t led_intensity_red = LED_USER_PRESET_RED,
+        led_intensity_green = LED_USER_PRESET_GREEN,
+        led_intensity_blue = LED_USER_PRESET_BLUE
+        #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+          , led_intensity_white = LED_USER_PRESET_WHITE
+        #endif
+        #if ENABLED(NEOPIXEL_LED)
+          , led_intensity = NEOPIXEL_BRIGHTNESS
+        #endif
+        ;
+  #else
+    uint8_t led_intensity_red = 255,
+            led_intensity_green = 255,
+            led_intensity_blue = 255
+            #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+              , led_intensity_white = 0
+            #endif
+            #if ENABLED(NEOPIXEL_LED)
+              , led_intensity = NEOPIXEL_BRIGHTNESS
+            #endif
+            ;
+  #endif
+#endif
+
 void set_led_color(
   const uint8_t r, const uint8_t g, const uint8_t b
     #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
@@ -42,20 +68,11 @@ void set_led_color(
 ) {
 
   #if ENABLED(NEOPIXEL_LED)
-
-    const uint32_t color = pixels.Color(r, g, b, w);
-    static uint16_t nextLed = 0;
-
-    pixels.setBrightness(p);
-    if (!isSequence)
-      set_neopixel_color(color);
-    else {
-      pixels.setPixelColor(nextLed, color);
-      pixels.show();
-      if (++nextLed >= pixels.numPixels()) nextLed = 0;
-      return;
+    if ((w == 255) || ((r == 255) && (g == 255) && (b == 255))) {
+      neopixel_set_led_color(NEO_WHITE, p);
     }
-
+    else
+      neopixel_set_led_color(r, g, b, w, p);
   #endif
 
   #if ENABLED(BLINKM)
@@ -81,6 +98,34 @@ void set_led_color(
   #if ENABLED(PCA9632)
     pca9632_set_led_color(r, g, b); // Update I2C LED driver
   #endif
+
+  #if ENABLED(LED_CONTROL_MENU)
+    if ((r + g + b
+      #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+        + w
+      #endif
+    ) >= 3) {
+      led_intensity_red = r;
+      led_intensity_green = g;
+      led_intensity_blue = b;
+      #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+        led_intensity_white = w;
+      #endif
+      #if ENABLED(NEOPIXEL_LED)
+        led_intensity = p;
+      #endif
+    }
+  #endif
+}
+
+void set_led_white(){
+  #if ENABLED(NEOPIXEL_LED)
+    neopixel_set_led_color(NEO_WHITE, pixels.getBrightness());
+  #elif (RGBW_LED)
+    set_led_color(0, 0, 0, 255);
+  #else
+    set_led_color(255, 255, 255);
+  #endif
 }
 
 #endif // HAS_COLOR_LEDS

Marlin/src/feature/leds/leds.h

@@ -65,4 +65,6 @@ void set_led_color(
     #endif
 );
 
+void set_led_white();
+
 #endif // __LEDS_H__

Marlin/src/feature/leds/neopixel.cpp

@@ -53,7 +53,27 @@ void setup_neopixel() {
     set_neopixel_color(pixels.Color(0, 0, 255, 0));  // blue
     safe_delay(1000);
   #endif
-  set_neopixel_color(pixels.Color(NEO_WHITE));       // white
+
+  #if ENABLED(LED_USER_PRESET_STARTUP)
+    set_neopixel_color(pixels.Color(LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE, LED_USER_PRESET_WHITE));
+  #else
+    set_neopixel_color(pixels.Color(0, 0, 0, 0));
+  #endif
+}
+
+bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p) {
+  const uint32_t color = pixels.Color(r, g, b, w);
+  pixels.setBrightness(p);
+  #if !ENABLED(NEOPIXEL_IS_SEQUENTIAL)
+    set_neopixel_color(color);
+    return false;
+  #else
+    static uint16_t nextLed = 0;
+    pixels.setPixelColor(nextLed, color);
+    pixels.show();
+    if (++nextLed >= pixels.numPixels()) nextLed = 0;
+    return true;
+  #endif
 }
 
 #endif // NEOPIXEL_LED

Marlin/src/feature/leds/neopixel.h

@@ -36,13 +36,14 @@
 #define NEOPIXEL_IS_RGBW !NEOPIXEL_IS_RGB
 
 #if NEOPIXEL_IS_RGB
-  #define NEO_WHITE 255, 255, 255
+  #define NEO_WHITE 255, 255, 255, 0
 #else
   #define NEO_WHITE 0, 0, 0, 255
 #endif
 
 void setup_neopixel();
 void set_neopixel_color(const uint32_t color);
+bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p);
 
 extern Adafruit_NeoPixel pixels;
 

Marlin/src/lcd/language/language_en.h

@@ -174,7 +174,6 @@
 #ifndef MSG_USER_MENU
   #define MSG_USER_MENU                       _UxGT("Custom Commands")
 #endif
-
 #ifndef MSG_UBL_DOING_G29
   #define MSG_UBL_DOING_G29                   _UxGT("Doing G29")
 #endif
@@ -361,7 +360,60 @@
 #ifndef MSG_UBL_STEP_BY_STEP_MENU
   #define MSG_UBL_STEP_BY_STEP_MENU           _UxGT("Step-By-Step UBL")
 #endif
-
+#ifndef MSG_LED_CONTROL
+  #define MSG_LED_CONTROL                     _UxGT("LED Control")
+#endif
+#ifndef MSG_LEDS_OFF
+  #define MSG_LEDS_OFF                        _UxGT("Turn Off Lights")
+#endif
+#ifndef MSG_LED_ON
+  #define MSG_LED_ON                          _UxGT("Turn on ")
+#endif
+#ifndef MSG_RED
+  #define MSG_RED                             _UxGT("Red ")
+#endif
+#ifndef MSG_ORANGE
+  #define MSG_ORANGE                          _UxGT("Orange ")
+#endif
+#ifndef MSG_YELLOW
+  #define MSG_YELLOW                          _UxGT("Yellow ")
+#endif
+#ifndef MSG_GREEN
+  #define MSG_GREEN                           _UxGT("Green ")
+#endif
+#ifndef MSG_BLUE
+  #define MSG_BLUE                            _UxGT("Blue ")
+#endif
+#ifndef MSG_PURPLE
+  #define MSG_PURPLE                          _UxGT("Purple ")
+#endif
+#ifndef MSG_WHITE
+  #define MSG_WHITE                           _UxGT("White ")
+#endif
+#ifndef MSG_CUSTOM
+  #define MSG_CUSTOM                          _UxGT("Custom ")
+#endif
+#ifndef MSG_LED_PRESET
+  #define MSG_LED_PRESET                      _UxGT("Preset ")
+#endif
+#ifndef MSG_LED_DEFAULT
+  #define MSG_LED_DEFAULT                     _UxGT("Default ")
+#endif
+#ifndef MSG_LIGHTS
+  #define MSG_LIGHTS                          _UxGT("Lights ")
+#endif
+#ifndef MSG_LED_INTENSITY
+  #define MSG_LED_INTENSITY                   _UxGT("Intensity ")
+#endif
+#ifndef MSG_LED_CUSTOM
+  #define MSG_LED_CUSTOM                      _UxGT("Custom LED")
+#endif
+#ifndef MSG_LED_SAVE
+  #define MSG_LED_SAVE                        _UxGT("Save ")
+#endif
+#ifndef MSG_LED_LOAD
+  #define MSG_LED_LOAD                        _UxGT("Load ")
+#endif
 #ifndef MSG_MOVING
   #define MSG_MOVING                          _UxGT("Moving...")
 #endif
@@ -839,7 +891,6 @@
     #define MSG_INFO_PRINT_FILAMENT           _UxGT("Extruded")
   #endif
 #endif
-
 #ifndef MSG_INFO_MIN_TEMP
   #define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
 #endif

Marlin/src/lcd/ultralcd.cpp

@@ -55,6 +55,10 @@
   #include "../feature/bedlevel/bedlevel.h"
 #endif
 
+#if ENABLED(LED_CONTROL_MENU)
+  #include "../feature/leds/leds.h"
+#endif
+
 // For i2c define BUZZ to use lcd_buzz
 #if DISABLED(LCD_USE_I2C_BUZZER)
   #include "../libs/buzzer.h"
@@ -185,6 +189,11 @@ uint16_t max_display_update_time = 0;
     void lcd_info_menu();
   #endif // LCD_INFO_MENU
 
+  #if ENABLED(LED_CONTROL_MENU)
+    void lcd_led_menu();
+    void lcd_led_custom_menu();
+  #endif
+
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
     void lcd_advanced_pause_toocold_menu();
     void lcd_advanced_pause_option_menu();
@@ -1014,6 +1023,9 @@ void kill_screen(const char* lcd_msg) {
       MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu);
     #endif
 
+    #if ENABLED(LED_CONTROL_MENU)
+      MENU_ITEM(submenu, "LED Control", lcd_led_menu);
+    #endif
     END_MENU();
   }
 
@@ -3933,6 +3945,132 @@ void kill_screen(const char* lcd_msg) {
 
   /**
    *
+   * LED Menu
+   *
+   */
+
+  #if ENABLED(LED_CONTROL_MENU)
+
+    bool led_restore_color =
+      #if ENABLED(LED_USER_PRESET_STARTUP)
+        false;
+      #else
+        true;
+      #endif
+
+    extern uint8_t led_intensity_red,
+           led_intensity_green,
+           led_intensity_blue
+           #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+             , led_intensity_white
+           #endif
+           #if ENABLED(NEOPIXEL_LED)
+             , led_intensity
+           #endif
+           ;
+
+    void update_leds() {
+      if (led_restore_color) {
+        #if ENABLED(LED_COLOR_PRESETS)
+          led_intensity_red = LED_USER_PRESET_RED;
+          led_intensity_green = LED_USER_PRESET_GREEN;
+          led_intensity_blue = LED_USER_PRESET_BLUE;
+          #if ENABLED(RGBW_LED)
+            led_intensity_white = LED_USER_PRESET_WHITE;
+          #endif
+          #if ENABLED(NEOPIXEL_LED)
+            led_intensity = LED_USER_PRESET_INTENSITY;
+          #endif
+        #else
+          led_intensity_red = 255;
+          led_intensity_green = 255;
+          led_intensity_blue = 255;
+          #if ENABLED(RGBW_LED)
+            led_intensity_white = 0;
+          #endif
+          #if ENABLED(NEOPIXEL_LED)
+            led_intensity = LED_USER_PRESET_INTENSITY;
+          #endif
+        #endif
+        led_restore_color = false;
+      }
+
+      set_led_color(led_intensity_red, led_intensity_green, led_intensity_blue
+        #if ENABLED(RGBW_LED)
+          , led_intensity_white
+        #endif
+        #if ENABLED(NEOPIXEL_LED)
+          , 0, led_intensity
+        #endif
+        );
+      led_restore_color = false;
+    }
+
+    void led_restore_default() {
+      led_restore_color = true;
+      update_leds();
+    }
+
+    void set_leds_off() {
+      set_led_color(0, 0, 0
+        #if ENABLED(RGBW) || ENABLED(NEOPIXEL_LED)
+        , 0
+        #endif
+        );
+    }
+
+    void lcd_led_red()    { set_led_color(255, 0, 0); }
+    void lcd_led_orange() { set_led_color(150, 60, 0); }
+    void lcd_led_yellow() { set_led_color(255, 255, 0); }
+    void lcd_led_green()  { set_led_color(0, 255, 0); }
+    void lcd_led_blue()   { set_led_color(0, 0, 255); }
+    void lcd_led_purple() { set_led_color(255, 0, 255); }
+
+    void lcd_led_presets_menu() {
+      START_MENU();
+      MENU_BACK(MSG_LED_CONTROL);
+      MENU_ITEM(function, MSG_LED_ON MSG_RED MSG_LIGHTS, lcd_led_red);
+      MENU_ITEM(function, MSG_LED_ON MSG_ORANGE MSG_LIGHTS, lcd_led_orange);
+      MENU_ITEM(function, MSG_LED_ON MSG_YELLOW MSG_LIGHTS,lcd_led_yellow);
+      MENU_ITEM(function, MSG_LED_ON MSG_GREEN MSG_LIGHTS, lcd_led_green);
+      MENU_ITEM(function, MSG_LED_ON MSG_BLUE MSG_LIGHTS, lcd_led_blue);
+      MENU_ITEM(function, MSG_LED_ON MSG_PURPLE MSG_LIGHTS, lcd_led_purple);
+      MENU_ITEM(function, MSG_LED_ON MSG_WHITE MSG_LIGHTS, set_led_white);
+      END_MENU();
+    }
+
+    void lcd_led_custom_menu() {
+      START_MENU();
+      MENU_BACK(MSG_LED_CONTROL);
+      MENU_ITEM_EDIT_CALLBACK(int8, MSG_RED MSG_LED_INTENSITY, &led_intensity_red, 0, 255, update_leds, true);
+      MENU_ITEM_EDIT_CALLBACK(int8, MSG_GREEN MSG_LED_INTENSITY, &led_intensity_green, 0, 255, update_leds, true);
+      MENU_ITEM_EDIT_CALLBACK(int8, MSG_BLUE MSG_LED_INTENSITY, &led_intensity_blue, 0, 255, update_leds, true);
+      #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+        MENU_ITEM_EDIT_CALLBACK(int8, MSG_WHITE MSG_LED_INTENSITY, &led_intensity_white, 0, 255, update_leds, true);
+      #endif
+      #if ENABLED(NEOPIXEL_LED)
+        MENU_ITEM_EDIT_CALLBACK(int8, MSG_LED_INTENSITY, &led_intensity, 0, 255, update_leds, true);
+      #endif
+      END_MENU();
+    }
+
+    void lcd_led_menu() {
+      START_MENU();
+      MENU_BACK(MSG_MAIN);
+      MENU_ITEM(function, MSG_LIGHTS MSG_OFF, set_leds_off); // works
+      MENU_ITEM(function, MSG_LIGHTS MSG_ON, update_leds); // works
+      MENU_ITEM(function, MSG_LED_LOAD MSG_LED_DEFAULT MSG_LIGHTS, led_restore_default); // works
+      #if ENABLED(LED_COLOR_PRESETS)
+        MENU_ITEM(submenu, MSG_LED_PRESET MSG_LIGHTS, lcd_led_presets_menu);
+      #endif
+      MENU_ITEM(submenu, MSG_CUSTOM MSG_LIGHTS, lcd_led_custom_menu);
+      END_MENU();
+    }
+
+  #endif // LED_CONTROL_MENU
+
+  /**
+   *
    * Filament Change Feature Screens
    *
    */