Make XY_PROBE_SPEED a general probe option

Marlin/Configuration.h

@@ -456,6 +456,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 10  // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -667,8 +670,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/Marlin_main.cpp

@@ -370,6 +370,8 @@ static uint8_t target_extruder;
   int xy_probe_speed = XY_PROBE_SPEED;
   bool bed_leveling_in_progress = false;
   #define XY_PROBE_FEEDRATE xy_probe_speed
+#elif defined(XY_PROBE_SPEED)
+  #define XY_PROBE_FEEDRATE XY_PROBE_SPEED
 #else
   #define XY_PROBE_FEEDRATE (min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]) * 60)
 #endif

Marlin/example_configurations/Cartesio/Configuration.h

@@ -455,6 +455,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 10  // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -666,8 +669,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/Felix/Configuration.h

@@ -438,6 +438,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -649,8 +652,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -436,6 +436,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -647,8 +650,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/Hephestos/Configuration.h

@@ -448,6 +448,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -659,8 +662,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -450,6 +450,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 15  // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -661,8 +664,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 2  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/K8200/Configuration.h

@@ -473,6 +473,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -684,8 +687,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -456,6 +456,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -667,8 +670,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/RigidBot/Configuration.h

@@ -450,6 +450,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -661,8 +664,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/SCARA/Configuration.h

@@ -464,6 +464,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -675,8 +678,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/TAZ4/Configuration.h

@@ -477,6 +477,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -688,8 +691,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/WITBOX/Configuration.h

@@ -448,6 +448,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -659,8 +662,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -456,6 +456,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -667,8 +670,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -498,6 +498,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 4000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 //#define Z_PROBE_ALLEN_KEY
@@ -750,8 +753,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/delta/generic/Configuration.h

@@ -498,6 +498,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 4000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 //#define Z_PROBE_ALLEN_KEY
@@ -744,8 +747,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -498,6 +498,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 4000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 #define Z_PROBE_ALLEN_KEY
@@ -747,8 +750,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -489,6 +489,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed.
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -17.25  // Increase this if the first layer is too thin (remember: it's a negative number so increase means closer to zero).
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 #define Z_PROBE_ALLEN_KEY
@@ -741,8 +744,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -496,6 +496,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0     // Z probe to nozzle Y offset: -front +behind
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3     // Z probe to nozzle Z offset: -below (always!)
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 //#define Z_PROBE_ALLEN_KEY
@@ -742,8 +745,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 10 // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/makibox/Configuration.h

@@ -459,6 +459,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -670,8 +673,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -446,6 +446,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -657,8 +660,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.