Replace const bool with #define for consistency

Marlin/Configuration.h

@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/Marlin_main.cpp

@@ -9488,7 +9488,7 @@ void disable_all_steppers() {
 void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
 
   #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-    if ((IS_SD_PRINTING || print_job_timer.isRunning()) && !(READ(FIL_RUNOUT_PIN) ^ FIL_RUNOUT_INVERTING))
+    if ((IS_SD_PRINTING || print_job_timer.isRunning()) && (READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING))
       handle_filament_runout();
   #endif
 

Marlin/example_configurations/Cartesio/Configuration.h

@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/Felix/Configuration.h

@@ -691,7 +691,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -691,7 +691,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/Hephestos/Configuration.h

@@ -700,7 +700,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -702,7 +702,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/K8200/Configuration.h

@@ -725,7 +725,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/K8400/Configuration.h

@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/RigidBot/Configuration.h

@@ -706,7 +706,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/SCARA/Configuration.h

@@ -723,7 +723,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/TAZ4/Configuration.h

@@ -729,7 +729,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/WITBOX/Configuration.h

@@ -700,7 +700,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -800,7 +800,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/delta/generic/Configuration.h

@@ -794,7 +794,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -797,7 +797,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -798,7 +798,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -800,7 +800,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/makibox/Configuration.h

@@ -711,7 +711,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -704,7 +704,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif