Update V45 Settings header

Marlin/configuration_store.cpp

@@ -42,15 +42,15 @@
 #define EEPROM_OFFSET 100
 
 /**
- * V44 EEPROM Layout:
+ * V45 EEPROM Layout:
  *
  *  100  Version                                    (char x4)
  *  104  EEPROM CRC16                               (uint16_t)
  *
  *  106            E_STEPPERS                       (uint8_t)
- *  107  M92 XYZE  planner.axis_steps_per_mm        (float x4 ... x8)
- *  123  M203 XYZE planner.max_feedrate_mm_s        (float x4 ... x8)
- *  139  M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4 ... x8)
+ *  107  M92 XYZE  planner.axis_steps_per_mm        (float x4 ... x8) + 64
+ *  123  M203 XYZE planner.max_feedrate_mm_s        (float x4 ... x8) + 64
+ *  139  M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4 ... x8) + 64
  *  155  M204 P    planner.acceleration             (float)
  *  159  M204 R    planner.retract_acceleration     (float)
  *  163  M204 T    planner.travel_acceleration      (float)
@@ -62,7 +62,7 @@
  *  187  M205 Z    planner.max_jerk[Z_AXIS]         (float)
  *  191  M205 E    planner.max_jerk[E_AXIS]         (float)
  *  195  M206 XYZ  home_offset                      (float x3)
- *  207  M218 XYZ  hotend_offset                    (float x3 per additional hotend)
+ *  207  M218 XYZ  hotend_offset                    (float x3 per additional hotend) +16
  *
  * Global Leveling:                                 4 bytes
  *  219            z_fade_height                    (float)
@@ -88,86 +88,86 @@
  *  316            z_values[][]                     (float x9, up to float x256) +988
  *
  * AUTO_BED_LEVELING_UBL:                           2 bytes
- *  324  G29 A     planner.leveling_active          (bool)
- *  325  G29 S     ubl.storage_slot                 (int8_t)
+ *  352  G29 A     planner.leveling_active          (bool)
+ *  353  G29 S     ubl.storage_slot                 (int8_t)
  *
  * DELTA:                                           44 bytes
- *  352  M666 H    delta_height                     (float)
- *  364  M666 XYZ  delta_endstop_adj                (float x3)
- *  368  M665 R    delta_radius                     (float)
- *  372  M665 L    delta_diagonal_rod               (float)
- *  376  M665 S    delta_segments_per_second        (float)
- *  380  M665 B    delta_calibration_radius         (float)
- *  384  M665 X    delta_tower_angle_trim[A]        (float)
- *  388  M665 Y    delta_tower_angle_trim[B]        (float)
- *  392  M665 Z    delta_tower_angle_trim[C]        (float)
+ *  354  M666 H    delta_height                     (float)
+ *  358  M666 XYZ  delta_endstop_adj                (float x3)
+ *  370  M665 R    delta_radius                     (float)
+ *  374  M665 L    delta_diagonal_rod               (float)
+ *  378  M665 S    delta_segments_per_second        (float)
+ *  382  M665 B    delta_calibration_radius         (float)
+ *  386  M665 X    delta_tower_angle_trim[A]        (float)
+ *  390  M665 Y    delta_tower_angle_trim[B]        (float)
+ *  394  M665 Z    delta_tower_angle_trim[C]        (float)
  *
  * [XYZ]_DUAL_ENDSTOPS:                             12 bytes
- *  352  M666 X    x_endstop_adj                    (float)
- *  356  M666 Y    y_endstop_adj                    (float)
- *  360  M666 Z    z_endstop_adj                    (float)
+ *  354  M666 X    x_endstop_adj                    (float)
+ *  358  M666 Y    y_endstop_adj                    (float)
+ *  362  M666 Z    z_endstop_adj                    (float)
  *
  * ULTIPANEL:                                       6 bytes
- *  396  M145 S0 H lcd_preheat_hotend_temp          (int x2)
- *  400  M145 S0 B lcd_preheat_bed_temp             (int x2)
- *  404  M145 S0 F lcd_preheat_fan_speed            (int x2)
+ *  398  M145 S0 H lcd_preheat_hotend_temp          (int x2)
+ *  402  M145 S0 B lcd_preheat_bed_temp             (int x2)
+ *  406  M145 S0 F lcd_preheat_fan_speed            (int x2)
  *
  * PIDTEMP:                                         82 bytes
- *  408  M301 E0 PIDC  Kp[0], Ki[0], Kd[0], Kc[0]   (float x4)
- *  428  M301 E1 PIDC  Kp[1], Ki[1], Kd[1], Kc[1]   (float x4)
- *  440  M301 E2 PIDC  Kp[2], Ki[2], Kd[2], Kc[2]   (float x4)
- *  456  M301 E3 PIDC  Kp[3], Ki[3], Kd[3], Kc[3]   (float x4)
- *  472  M301 E4 PIDC  Kp[3], Ki[3], Kd[3], Kc[3]   (float x4)
- *  488  M301 L        lpq_len                      (int)
+ *  410  M301 E0 PIDC  Kp[0], Ki[0], Kd[0], Kc[0]   (float x4)
+ *  426  M301 E1 PIDC  Kp[1], Ki[1], Kd[1], Kc[1]   (float x4)
+ *  442  M301 E2 PIDC  Kp[2], Ki[2], Kd[2], Kc[2]   (float x4)
+ *  458  M301 E3 PIDC  Kp[3], Ki[3], Kd[3], Kc[3]   (float x4)
+ *  474  M301 E4 PIDC  Kp[3], Ki[3], Kd[3], Kc[3]   (float x4)
+ *  490  M301 L        lpq_len                      (int)
  *
  * PIDTEMPBED:                                      12 bytes
- *  490  M304 PID  thermalManager.bedKp, .bedKi, .bedKd (float x3)
+ *  492  M304 PID  bedKp, .bedKi, .bedKd            (float x3)
  *
  * DOGLCD:                                          2 bytes
- *  502  M250 C    lcd_contrast                     (uint16_t)
+ *  504  M250 C    lcd_contrast                     (uint16_t)
  *
  * FWRETRACT:                                       33 bytes
- *  504  M209 S    autoretract_enabled              (bool)
- *  505  M207 S    retract_length                   (float)
- *  509  M207 F    retract_feedrate_mm_s            (float)
- *  513  M207 Z    retract_zlift                    (float)
- *  517  M208 S    retract_recover_length           (float)
- *  521  M208 F    retract_recover_feedrate_mm_s    (float)
- *  525  M207 W    swap_retract_length              (float)
- *  529  M208 W    swap_retract_recover_length      (float)
- *  533  M208 R    swap_retract_recover_feedrate_mm_s (float)
+ *  506  M209 S    autoretract_enabled              (bool)
+ *  507  M207 S    retract_length                   (float)
+ *  511  M207 F    retract_feedrate_mm_s            (float)
+ *  515  M207 Z    retract_zlift                    (float)
+ *  519  M208 S    retract_recover_length           (float)
+ *  523  M208 F    retract_recover_feedrate_mm_s    (float)
+ *  527  M207 W    swap_retract_length              (float)
+ *  531  M208 W    swap_retract_recover_length      (float)
+ *  535  M208 R    swap_retract_recover_feedrate_mm_s (float)
  *
  * Volumetric Extrusion:                            21 bytes
- *  537  M200 D    parser.volumetric_enabled        (bool)
- *  538  M200 T D  planner.filament_size            (float x5) (T0..3)
+ *  539  M200 D    parser.volumetric_enabled        (bool)
+ *  540  M200 T D  planner.filament_size            (float x5) (T0..3)
  *
  * HAVE_TMC2130:                                    22 bytes
- *  558  M906 X    Stepper X current                (uint16_t)
- *  560  M906 Y    Stepper Y current                (uint16_t)
- *  562  M906 Z    Stepper Z current                (uint16_t)
- *  564  M906 X2   Stepper X2 current               (uint16_t)
- *  566  M906 Y2   Stepper Y2 current               (uint16_t)
- *  568  M906 Z2   Stepper Z2 current               (uint16_t)
- *  570  M906 E0   Stepper E0 current               (uint16_t)
- *  572  M906 E1   Stepper E1 current               (uint16_t)
- *  574  M906 E2   Stepper E2 current               (uint16_t)
- *  576  M906 E3   Stepper E3 current               (uint16_t)
- *  578  M906 E4   Stepper E4 current               (uint16_t)
+ *  560  M906 X    Stepper X current                (uint16_t)
+ *  562  M906 Y    Stepper Y current                (uint16_t)
+ *  564  M906 Z    Stepper Z current                (uint16_t)
+ *  566  M906 X2   Stepper X2 current               (uint16_t)
+ *  568  M906 Y2   Stepper Y2 current               (uint16_t)
+ *  570  M906 Z2   Stepper Z2 current               (uint16_t)
+ *  572  M906 E0   Stepper E0 current               (uint16_t)
+ *  574  M906 E1   Stepper E1 current               (uint16_t)
+ *  576  M906 E2   Stepper E2 current               (uint16_t)
+ *  578  M906 E3   Stepper E3 current               (uint16_t)
+ *  580  M906 E4   Stepper E4 current               (uint16_t)
  *
  * LIN_ADVANCE:                                     8 bytes
- *  580  M900 K    extruder_advance_k               (float)
- *  584  M900 WHD  advance_ed_ratio                 (float)
+ *  582  M900 K    extruder_advance_k               (float)
+ *  586  M900 WHD  advance_ed_ratio                 (float)
  *
  * HAS_MOTOR_CURRENT_PWM:
- *  588  M907 X    Stepper XY current               (uint32_t)
- *  592  M907 Z    Stepper Z current                (uint32_t)
- *  596  M907 E    Stepper E current                (uint32_t)
+ *  590  M907 X    Stepper XY current               (uint32_t)
+ *  594  M907 Z    Stepper Z current                (uint32_t)
+ *  598  M907 E    Stepper E current                (uint32_t)
  *
  * CNC_COORDINATE_SYSTEMS                           108 bytes
- *  600  G54-G59.3 coordinate_system                (float x 27)
+ *  602  G54-G59.3 coordinate_system                (float x 27)
  *
- *  708                                Minimum end-point
- * 2025 (704 + 36 + 9 + 288 + 988)     Maximum end-point
+ *  710                                   Minimum end-point
+ * 2239 (710 + 208 + 36 + 9 + 288 + 988)  Maximum end-point
  *
  * ========================================================================
  * meshes_begin (between max and min end-point, directly above)
@@ -449,7 +449,7 @@ void MarlinSettings::postprocess() {
       EEPROM_WRITE(storage_slot);
     #endif // AUTO_BED_LEVELING_UBL
 
-    // 10 floats for DELTA / [XYZ]_DUAL_ENDSTOPS
+    // 11 floats for DELTA / [XYZ]_DUAL_ENDSTOPS
     #if ENABLED(DELTA)
       EEPROM_WRITE(delta_height);              // 1 float
       EEPROM_WRITE(delta_endstop_adj);         // 3 floats
@@ -480,11 +480,11 @@ void MarlinSettings::postprocess() {
         EEPROM_WRITE(dummy);
       #endif
 
-      for (uint8_t q = 7; q--;) EEPROM_WRITE(dummy);
+      for (uint8_t q = 8; q--;) EEPROM_WRITE(dummy);
 
     #else
       dummy = 0.0f;
-      for (uint8_t q = 10; q--;) EEPROM_WRITE(dummy);
+      for (uint8_t q = 11; q--;) EEPROM_WRITE(dummy);
     #endif
 
     #if DISABLED(ULTIPANEL)