🏗️ More 9-axis updates

Marlin/Configuration_adv.h

@@ -2865,6 +2865,7 @@
     #define U_RSENSE         0.11
     #define U_CHAIN_POS     -1
     //#define U_INTERPOLATE  true
+    //#define U_HOLD_MULTIPLIER 0.5
   #endif
 
   #if AXIS_IS_TMC(V)
@@ -2874,6 +2875,7 @@
     #define V_RSENSE         0.11
     #define V_CHAIN_POS     -1
     //#define V_INTERPOLATE  true
+    //#define V_HOLD_MULTIPLIER 0.5
   #endif
 
   #if AXIS_IS_TMC(W)
@@ -2883,6 +2885,7 @@
     #define W_RSENSE         0.11
     #define W_CHAIN_POS     -1
     //#define W_INTERPOLATE  true
+    //#define W_HOLD_MULTIPLIER 0.5
   #endif
 
   #if AXIS_IS_TMC(E0)

Marlin/src/gcode/calibrate/M425.cpp

@@ -66,7 +66,7 @@ void GcodeSuite::M425() {
   LOOP_NUM_AXES(a) {
     if (axis_can_calibrate(a) && parser.seen(AXIS_CHAR(a))) {
       planner.synchronize();
-      backlash.set_distance_mm(AxisEnum(a), parser.has_value() ? parser.value_axis_units(AxisEnum(a)) : backlash.get_measurement(AxisEnum(a)));
+      backlash.set_distance_mm((AxisEnum)a, parser.has_value() ? parser.value_axis_units((AxisEnum)a) : backlash.get_measurement((AxisEnum)a));
       noArgs = false;
     }
   }

Marlin/src/gcode/config/M200-M205.cpp

@@ -144,7 +144,7 @@ void GcodeSuite::M201_report(const bool forReplay/*=true*/) {
       SP_K_STR, K_AXIS_UNIT(planner.settings.max_acceleration_mm_per_s2[K_AXIS]),
       SP_U_STR, U_AXIS_UNIT(planner.settings.max_acceleration_mm_per_s2[U_AXIS]),
       SP_V_STR, V_AXIS_UNIT(planner.settings.max_acceleration_mm_per_s2[V_AXIS]),
-      SP_W_STR, W_AXIS_UNIT(planner.settings.max_acceleration_mm_per_s2[W_AXIS]),
+      SP_W_STR, W_AXIS_UNIT(planner.settings.max_acceleration_mm_per_s2[W_AXIS])
     )
     #if HAS_EXTRUDERS && DISABLED(DISTINCT_E_FACTORS)
       , SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS])

Marlin/src/gcode/control/M17_M18_M84.cpp

@@ -92,7 +92,7 @@ void do_enable(const stepper_flags_t to_enable) {
 
   if ((also_enabled &= ~(shall_enable | was_enabled))) {
     SERIAL_CHAR('(');
-    LOOP_NUM_AXES(a) if (TEST(also_enabled, a)) SERIAL_CHAR(axis_codes[a], ' ');
+    LOOP_NUM_AXES(a) if (TEST(also_enabled, a)) SERIAL_CHAR(AXIS_CHAR(a), ' ');
     #if HAS_EXTRUDERS
       #define _EN_ALSO(N) if (TEST(also_enabled, INDEX_OF_AXIS(E_AXIS, N))) SERIAL_CHAR('E', '0' + N, ' ');
       REPEAT(EXTRUDERS, _EN_ALSO)

Marlin/src/gcode/feature/L6470/M906.cpp

@@ -285,6 +285,25 @@ void GcodeSuite::M906() {
           break;
       #endif
 
+      #if AXIS_IS_L64XX(I)
+        case I_AXIS: L6470_SET_KVAL_HOLD(I); break;
+      #endif
+      #if AXIS_IS_L64XX(J)
+        case J_AXIS: L6470_SET_KVAL_HOLD(J); break;
+      #endif
+      #if AXIS_IS_L64XX(K)
+        case K_AXIS: L6470_SET_KVAL_HOLD(K); break;
+      #endif
+      #if AXIS_IS_L64XX(U)
+        case U_AXIS: L6470_SET_KVAL_HOLD(U); break;
+      #endif
+      #if AXIS_IS_L64XX(V)
+        case V_AXIS: L6470_SET_KVAL_HOLD(V); break;
+      #endif
+      #if AXIS_IS_L64XX(W)
+        case W_AXIS: L6470_SET_KVAL_HOLD(W); break;
+      #endif
+
       #if AXIS_IS_L64XX(E0) || AXIS_IS_L64XX(E1) || AXIS_IS_L64XX(E2) || AXIS_IS_L64XX(E3) || AXIS_IS_L64XX(E4) || AXIS_IS_L64XX(E5) || AXIS_IS_L64XX(E6) || AXIS_IS_L64XX(E7)
         case E_AXIS: {
           const int8_t eindex = get_target_e_stepper_from_command(-2);
@@ -346,6 +365,24 @@ void GcodeSuite::M906() {
     #if AXIS_IS_L64XX(Z4)
       L64XX_REPORT_CURRENT(Z4);
     #endif
+    #if AXIS_IS_L64XX(I)
+      L64XX_REPORT_CURRENT(I);
+    #endif
+    #if AXIS_IS_L64XX(J)
+      L64XX_REPORT_CURRENT(J);
+    #endif
+    #if AXIS_IS_L64XX(K)
+      L64XX_REPORT_CURRENT(K);
+    #endif
+    #if AXIS_IS_L64XX(U)
+      L64XX_REPORT_CURRENT(U);
+    #endif
+    #if AXIS_IS_L64XX(V)
+      L64XX_REPORT_CURRENT(V);
+    #endif
+    #if AXIS_IS_L64XX(W)
+      L64XX_REPORT_CURRENT(W);
+    #endif
     #if AXIS_IS_L64XX(E0)
       L64XX_REPORT_CURRENT(E0);
     #endif

Marlin/src/gcode/host/M114.cpp

@@ -34,7 +34,7 @@
     #include "../../core/debug_out.h"
   #endif
 
-  void report_all_axis_pos(const xyze_pos_t &pos, const uint8_t n=XYZE, const uint8_t precision=3) {
+  void report_all_axis_pos(const xyze_pos_t &pos, const uint8_t n=LOGICAL_AXES, const uint8_t precision=3) {
     char str[12];
     LOOP_L_N(a, n) {
       SERIAL_CHAR(' ', axis_codes[a], ':');

Marlin/src/libs/L64XX/L64XX_Marlin.cpp

@@ -415,8 +415,8 @@ uint8_t L64XX_Marlin::get_user_input(uint8_t &driver_count, L64XX_axis_t axis_in
   LOOP_LOGICAL_AXES(i) if (uint16_t _displacement = parser.intval(axis_codes[i])) {
     found_displacement = true;
     displacement = _displacement;
-    uint8_t axis_offset = parser.byteval('J');
-    axis_mon[0][0] = axis_codes[i];         // Axis first character, one of XYZE
+    const uint8_t axis_offset = parser.byteval('J');
+    axis_mon[0][0] = axis_codes[i];         // Axis first character, one of XYZ...E
     const bool single_or_e = axis_offset >= 2 || axis_mon[0][0] == 'E',
                one_or_more = !single_or_e && axis_offset == 0;
     uint8_t driver_count_local = 0;         // Can't use "driver_count" directly as a subscript because it's passed by reference

Marlin/src/libs/L64XX/L64XX_Marlin.h

@@ -36,7 +36,7 @@
 #define HAS_L64XX_EXTRUDER (AXIS_IS_L64XX(E0) || AXIS_IS_L64XX(E1) || AXIS_IS_L64XX(E2) || AXIS_IS_L64XX(E3) || AXIS_IS_L64XX(E4) || AXIS_IS_L64XX(E5) || AXIS_IS_L64XX(E6) || AXIS_IS_L64XX(E7))
 
 #define _EN_ITEM(N) , E##N
-enum L64XX_axis_t : uint8_t { NUM_AXIS_LIST(X, Y, Z, I, J, K), X2, Y2, Z2, Z3, Z4 REPEAT(E_STEPPERS, _EN_ITEM), MAX_L64XX };
+enum L64XX_axis_t : uint8_t { NUM_AXIS_LIST(X, Y, Z, I, J, K, U, V, W), X2, Y2, Z2, Z3, Z4 REPEAT(E_STEPPERS, _EN_ITEM), MAX_L64XX };
 #undef _EN_ITEM
 
 class L64XX_Marlin : public L64XXHelper {