marlin

Commit Graph

Tekijä	SHA1	Viesti	Päivämäärä
daid303	52158dffcc	Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.	11 vuotta sitten
daid303	587154c01b	Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.	11 vuotta sitten
Mark Finn	9698f4ea64	bed pid Conflicts: Marlin/Configuration.h	12 vuotta sitten
Daid	8503b78876	Added support for 2nd extruder temperature to UltraLCD	12 vuotta sitten
Erik van der Zalm	87c4e06c24	Corrected active_extruder when autotemp is used.	12 vuotta sitten
Erik van der Zalm	c077316b2b	Added PID autotune. (experimental) M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed. Put these values in Configuration.h	12 vuotta sitten
Bernhard	3c1a4aac2b	header file simplification	12 vuotta sitten
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	12 vuotta sitten
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	12 vuotta sitten
Bernhard	3320a5b37d	make autotemp compatile for use without pid	12 vuotta sitten
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	12 vuotta sitten
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	12 vuotta sitten
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	12 vuotta sitten
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	12 vuotta sitten
Bernhard	59205ac5fc	preliminiary implementation for the early heating finish. Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed. its kind of not so cool, because you need 6 more ints. Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways. Then it would be much easier. to have the offsets without additional variables.	12 vuotta sitten
Bernhard	e4ab0e5982	more inlines	12 vuotta sitten
Bernhard	b19c8b74b9	force inline	12 vuotta sitten
Bernhard	26a1de1e44	force inline	12 vuotta sitten
Erik van der Zalm	aad4b75b94	First parts 2nd extruder	12 vuotta sitten
Bernhard Kubicek	c57906b627	fixed bug with adjusting ki in realtime.	12 vuotta sitten
Bernhard Kubicek	1d171e9e52	reformating and some minor bugs/things found on the way.	12 vuotta sitten
Bernhard Kubicek	1740a83e11	correcting commit errors.	12 vuotta sitten
Bernhard Kubicek	2afb7bd4cf	refactured temperature.cpp so that there are now abstract functions to access temperatures.	12 vuotta sitten
Erik van der Zalm	2e8e8878e5	Corrected temp variables.	12 vuotta sitten
Erik van der Zalm	d15f01e1b4	Temperature changes	12 vuotta sitten
Bernhard Kubicek	b9ea0651ec	Revert "this is not working. Do you maybe know why?" This reverts commit 8bcdb9f5f0.	12 vuotta sitten
Bernhard Kubicek	8bcdb9f5f0	this is not working. Do you maybe know why?	12 vuotta sitten
Bernhard Kubicek	00674af3a8	merge from the branch bkubicek/Marlin/zalmmerge	12 vuotta sitten
Erik van der Zalm	094afe7c10	Merged Marlin, Marlin non gen6 and Ultimaker changes	12 vuotta sitten

32 Commitit (01541ee64ca1239c9bfa593c54085ae78e0b78ec)