marlin

Дрво: 1dba212e18

Аутор	SHA1	Порука	Датум
daid	12de8fff81	Support step motor controllers with active low step pins.	пре 12 година
Bernhard	0c123950e9	__ header file replace	пре 12 година
Bernhard	bf077125b9	added firmware retract. disabled by default	пре 12 година
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	пре 12 година
Erik van der Zalm	4ca2f336f0	Changed default MINIMUM_PLANNER_SPEED -> 0.05 Fixed small bug in arcs M105 prints now actual_temp/target_temp	пре 12 година
Bernhard	1532200435	found error in filenames. One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely	пре 12 година
Erik van der Zalm	87ff2f8867	Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)	пре 12 година
Erik van der Zalm	c6f2ec3c82	remove stop_heating_wait	пре 12 година
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) Included AD595 calibration options. (daid)	пре 12 година
Blair Thompson	d9f2f509d5	Added new menu items under the prepare submenu. Instead of a single pre-heat, now there is pre-heat ABS and PLA options Added defines to the configuration file to adjust preheat temperatures for both	пре 12 година
Erik van der Zalm	8816ef1c64	Small fixes after merge	пре 12 година
Erik van der Zalm	b447815de5	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	пре 12 година
Erik van der Zalm	13e185d330	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	пре 12 година
Erik van der Zalm	5113513cb2	RC 1	пре 12 година
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. One for common settings. One for advanced settings.	пре 12 година

14 Комити (1dba212e18fbb80976462387744d400235c9841d)