marlin

Commit Graph

Аутор	SHA1	Порука	Датум
Scott Lahteine	083d41a2c2	Remove redundant estep rate code from LIN_ADVANCE As noted by https://github.com/MarlinFirmware/Marlin/pull/4971#issuecomment-252503295	пре 7 година
esenapaj	cfb5c24bc9	Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization) ・Fix a comment about timer	пре 8 година
Scott Lahteine	c5cac486f5	Use a, b, c instead of lx, ly, lz	пре 8 година
Scott Lahteine	3752d9aca8	Fix timer comments	пре 8 година
Sebastianv650	a448cedbc5	LIN_ADVANCE bug fix and optimization .) long to int: Extruder stalls at 10kHz / 20kHz step limits with long. .) Take the delta_adv_steps calculation out of the step_loops loop. Wasted calculation performance if done inside. .) >> 2 replaced by 3: Is divide by 8. Reason: Timer 0 runs at 16/8=2MHz, Timer 1 at 16/64=0.25MHz. ==> 2/0.25=8.	пре 8 година
esenapaj	f8df88f271	Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()	пре 8 година
Scott Lahteine	ecf7cdde65	Augment planner/stepper getters/setters	пре 8 година
Scott Lahteine	5fff8d148b	Clean up digital pots and microsteps	пре 8 година
Scott Lahteine	cb48292338	Use fastio for literal pins	пре 8 година
Scott Lahteine	eabff30e75	Improve MINIMUM_STEPPER_PULSE	пре 8 година
Scott Lahteine	cc639d7d9c	Less indentation in Stepper::isr	пре 8 година
Scott Lahteine	7dec8071b2	Always synchronize in Stepper::set_position	пре 8 година
esenapaj	954563d603	Adjust spacing	пре 8 година
esenapaj	7e9576dc5b	Extend the e_steps[] from int to long for allowing more than 32,767 E steps Probably needed for long straight lines when using high microstepping	пре 8 година
esenapaj	b04ed8f9c3	Fix inverted stepper signal of ADVANCED and LIN_ADVANCED	пре 8 година
esenapaj	8692748ecd	Fix broken direction signal of ADVANCED and LIN_ADVANCED Remove a setting proccess of E direction in advance_isr()	пре 8 година
Scott Lahteine	edfaf1c582	Stepper::report_positions patch	пре 8 година
Scott Lahteine	9bf78ef465	Fix capitalization of counter_m	пре 8 година
Scott Lahteine	42b5616327	Try bool for direction instead of long	пре 8 година
Scott Lahteine	d07a913f21	Tweak to stepper advance e_steps update	пре 8 година
Scott Lahteine	426f662586	Apply MINIMUM_STEPPER_PULSE in stepper advance_isr	пре 8 година
Scott Lahteine	8c7ee4599e	Optimize stepper advance_isr	пре 8 година
Scott Lahteine	9725bcd099	Minor "optimizations" in stepper ISR	пре 8 година
Scott Lahteine	4ec3d1ea58	Add some commentary to stepper ISR	пре 8 година
Scott Lahteine	d9bcc7bb45	Set a bool when a stepper block is done	пре 8 година
Scott Lahteine	08f717e5f7	Use bit-size typedefs for some stepper vars	пре 8 година
Scott Lahteine	759234af60	MINIMUM_STEPPER_PULSE option	пре 8 година
Scott Lahteine	a28e15399f	Patch stepper.cpp to allow omitting steppers	пре 8 година
Scott Lahteine	2f223b8c79	Use ABC and XYZ for "3"	пре 8 година
Scott Lahteine	d8f2876753	Replace some float division with multiplication	пре 8 година
Scott Lahteine	f8b5749235	Replace division in planner with multiplication	пре 8 година
Scott Lahteine	176b9627c7	Some cleanup ahead of BLTOUCH support	пре 8 година
Scott Lahteine	05da02f0a2	Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER	пре 8 година
Scott Lahteine	4b4a582c4f	X_DUAL_STEPPER_DRIVERS implementation	пре 8 година
Scott Lahteine	bd491818d6	Reduce storage requirements for strings, make some PGM	пре 8 година
João Brázio	664232140d	Fixes somes compiler warnings	пре 8 година
Sebastianv650	0c5192b288	Patch LIN_ADVANCE timing issue Also the extruder stepper ISR has to keep an eye on step_loops count.	пре 8 година
Scott Lahteine	8d8180e028	Parse M905 args in Marlin_main.cpp	пре 8 година
Scott Lahteine	2b340f5acb	patch LIN_ADVANCE to use code_value_float	пре 8 година
Scott Lahteine	aad9c0ed8d	Apply updated ISR timing code	пре 8 година
Scott Lahteine	506d78b2f8	Run the advance_isr faster instead of doing multiple e-steps per interrupt	пре 8 година
Scott Lahteine	6d62a4ffc8	Patch LIN_ADVANCE for style and forward-compatibility	пре 8 година
Sebastianv650	fb8e880734	Add LIN_ADVANCE	пре 8 година
Scott Lahteine	72c6f2923f	axis_steps_per_unit => axis_steps_per_mm	пре 8 година
Scott Lahteine	e2a8961635	Use e_steps[EXTRUDERS] instead of e_steps[4]	пре 8 година
Scott Lahteine	668d50f68e	Keep Stepper encapsulation, use static data and methods	пре 8 година
Scott Lahteine	5172d4ba40	COREYZ stepper, planner, endstop, babysteps	пре 8 година
Scott Lahteine	07c9a11c3c	Automatically set X2 stepper pins	пре 8 година
Scott Lahteine	15fc93d742	Cleanup and consolidate probe conditionals for clarity	пре 8 година
Scott Lahteine	6398d497b3	Ultimate followup to Stepper/Planner patch - Search all symbols and apply prefixes where needed - Encapsulate some private methods - Inline some setters - Make `microstep_mode` a public method	пре 8 година

Први Претходна 1 2 3 4 5 ... Следеће Последњи

282 Комити (3544c3632f50b5e8ed1f3df6b156730ac4263d5a)