marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Scott Lahteine	14395a1a96	Optimize, reduce size of MarlinSerial	vor 8 Jahren
Scott Lahteine	b73203a0b7	Move some includes around to uncover missing deps	vor 8 Jahren
AnHardt	4b44a23a36	Add TX-buffer for MarlinSerial Similar to the current Arduino HardwareSerial but with max. 256 byte buffer-size. Deactivated by default. The boards with AT90USB processor (USBCON) already use a TX-buffer.	vor 8 Jahren
AnHardt	a129078927	Add an emergency-command parser to MarlinSerial (supporting M108) Add an emergency-command parser to MarlinSerial's RX interrupt. The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer. To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered. This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`". The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character. One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`. In that case the host should send "\ncommand\n" Also introduces M108 to break the waiting for the heaters in M109, M190 and M303. Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.	vor 8 Jahren
esenapaj	888443ca1e	Enclose all #error strings with apostrophes	vor 8 Jahren
Scott Lahteine	0da744b7b0	Further cleanup of comments, partial Doxygen-style Following up on #3231	vor 8 Jahren
jbrazio	5e5d250832	Added gplv3 header to all Marlin files	vor 8 Jahren
AnHardt	cb88fdd242	Protect MarlinSerial against interrupts Protect MarlinSerial against interrupts by shielding the CRITICAL_SECTIONs Now with a test if RX_BUFFER_SIZE is in the required range. Code in peek() and read() is now optimized for readability and showing the similarity between the two. Maybe a bit overprotected in checkRx() and store_char(), but now some days without detected errors from this source.	vor 8 Jahren
AnHardt	dc0f41868e	Make rx tail/head atomic	vor 8 Jahren
Scott Lahteine	0c7f7ebcfb	Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting	vor 9 Jahren
Richard Wackerbarth	4b9d5cd352	Use lowercase names for serial instances	vor 9 Jahren
Scott Lahteine	1e2deff4fd	Rename BTENABLED to BLUETOOTH - For some reason it’s easy to forget what BT stands for, but it doesn’t need an abbreviation.	vor 9 Jahren
Scott Lahteine	58cfcd4239	Overridable Options - Part 5 Apply `ENABLED` / `DISABLED` macros to files needing only a small number of changes.	vor 9 Jahren
Richard Wackerbarth	e83575537a	Compiler defines USBCON for USB devices (PR#2433)	vor 9 Jahren
Scott Lahteine	c065da52ec	Spacing and spelling	vor 9 Jahren
Scott Lahteine	c37f7d15c9	- Rename WRITE_E_STEP for consistency - Add BIT and TEST macros - Add _APPLY_ macros to stepper.cpp to help with consolidation - Consolidate code in stepper.cpp using macros - Apply standards in stepper.cpp - Use >= 0 instead of > -1 as a better semantic - Replace DUAL_Y_CARRIAGE with Y_DUAL_STEPPER_DRIVERS	vor 9 Jahren
Scott Lahteine	fd78902194	Formatting cleanup of quiet sources	vor 9 Jahren
fmalpartida	b5a964fcc5	Initial SAV MkI (RepRap CloneWars board) integration. Included support for BT dongle on AT90USB boards. Added LCD Shift Register LCD control Included support for RepRap Clone Wars project board (SAV MKI).	vor 11 Jahren
Johann Rocholl	6cba11f087	Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.	vor 12 Jahren
Robert F-C	99692dc99e	Clean up special serial port cases Assume SERIAL_PORT 0 if not defined. Collapse un-numbered register special case. Clarify comments.	vor 12 Jahren
daid303	5a998558a9	Update suggested by Robert F-C. #289	vor 12 Jahren
daid303	d3ebc34958	Hopefully also support chips with a single UART in MarlinSerial now.	vor 12 Jahren
Robert F-C	ab9d183024	Make serial port configurable. This change makes the choice of serial port configurable so that wireless capability can be easily added by connecting Bluetooth modules (such as BlueSmirf or JY-MCU) to the expansion port pins.	vor 12 Jahren
Erik van der Zalm	9173a5713b	Teensylu support.	vor 12 Jahren
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	vor 13 Jahren
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	vor 13 Jahren
Bernhard	b0c3871750	more fixing of the sanguino math round problem	vor 13 Jahren
Bernhard	9c57453168	removed stream.h referenece from marlinserial.	vor 13 Jahren
Bernhard	7a4be21b4f	made it compile if arduino decides to include files in a differnt order. DEC HEX and stuff now defined in MarlinSerial.h	vor 13 Jahren
Bernhard	b19c8b74b9	force inline	vor 13 Jahren
Bernhard	85da81e673	inlineing of small functions in serial	vor 13 Jahren
Bernhard	b9ad0bb2ce	removed unecessary indirect register adressing in serial.	vor 13 Jahren
Bernhard	dd5ca68c87	get rid of indirect ringbuffer calls, made some inlines, removed virtual and streaming class requirements.	vor 13 Jahren
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	vor 13 Jahren
Erik van der Zalm	2643ae93d6	Added modified Sanguino files	vor 13 Jahren

34 Commits (5db3738fe72ff8d5fca49ff7ff902dcf1b7e4b56)