marlin

Commit Graph

Yazar	SHA1	Mesaj	Tarih
Scott Lahteine	7f20184ebc	Fix auto#.g file handling, add NO_SD_AUTOSTART (#20071)	3 yıl önce
Victor Oliveira	ea371618da	Add Touch Calibration screen (#20049)	4 yıl önce
Scott Lahteine	f17394d677	Ability to disable M32	4 yıl önce
Alexander Semion	cd89fa141b	Add SPINDLE_SERVO option (#19971)	4 yıl önce
ellensp	69d55cabd4	Handle dependent Stepper Driver defaults later (#19820) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	4 yıl önce
Scott Lahteine	f6ffbe548c	TFT Presets, Generic options, Sanity checks (#19723)	4 yıl önce
Jason Smith	90d364fc37	Revert at90usb1286 conditional (#19733)	4 yıl önce
Jason Smith	45731bd022	Fix at90usb1286 build (#19687) * Skip check for USBCON during dependency detection * Ignore incompatible Teensy_ADC library, which requires Teensy >= 3 * Add IS_AT90USB Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	4 yıl önce
Scott Lahteine	492ba2a111	Digipots refactor / cleanup (#19690)	4 yıl önce
ladismrkolj	2c99c1e06f	Add Chamber servo vent, auto fan (#19519)	4 yıl önce
Jason Smith	da6c8317a7	Fix and improve STM32F1 serial (#19464)	4 yıl önce
InsanityAutomation	62206c0386	Host Action: Start (#19398)	4 yıl önce
cosmoderp	073b7f1e3a	E3 V2 DWIN: Z-Offset, cleanup, versatility (#19384) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	4 yıl önce
ellensp	979876e958	Improve temperature runaway, idle timeout (#19339) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	4 yıl önce
Zachary Annand	97ec6c1be6	Independent Neopixel option (#19115)	4 yıl önce
Victor Oliveira	ff5c8d3570	Optimize LVGL with HAL TFT IO (SPI and FSMC) (#18974)	4 yıl önce
Scott Lahteine	7a5d408bc0	Conditions cleanup	4 yıl önce
Scott Lahteine	d69c2a90b7	Simple rename of hex_print	4 yıl önce
Alexander Gavrilenko	117df87d19	Support for TFT & Touch Screens (#18130)	4 yıl önce
Scott Lahteine	e27f031a55	General cleanup	4 yıl önce
Diego von Deschwanden	42fbd527f3	Fix links to secure sites (#18745)	4 yıl önce
Scott Lahteine	c2363a81b4	Fix E3V2 M0/M1 and wait_for_user	4 yıl önce
cccc	1815866877	Show fixed V in Power Display with no V sensor (#18579)	4 yıl önce
ellensp	12e7106a8a	Update and fix POWER_MONITOR (#18561)	4 yıl önce
George Fu	097347b575	Add FYSETC 2.42 inch OLED support (#18485)	4 yıl önce
Scott Lahteine	424569b4c4	Power monitor and display (#17437)	4 yıl önce
Luu Lac	eda2fd8dbe	Improvements for Laser / Spindle (#17661)	4 yıl önce
Scott Lahteine	cfd31ff70e	Add HAS_FILAMENT_RUNOUT_DISTANCE	4 yıl önce
Colin Godsey	8a22ef0c83	G6 Direct Stepping (#17853)	4 yıl önce
Scott Lahteine	33127f4476	More conservative Trinamic DIR delay See #17323 This makes babystepping more reliable and may improve Trinamic motion overall. Co-Authored-By: chgi <chgi@users.noreply.github.com>	4 yıl önce
Scott Lahteine	5e6faa999d	Refine EEPROM types / flags (#17772)	4 yıl önce
Scott Lahteine	e222ba4c81	Prevent DUE / Spindle conflict Fixes #17449	4 yıl önce
Scott Lahteine	87875e0de8	Fix mixing with "unload all" compile	4 yıl önce
grauerfuchs	4a5a3d27ed	Option to use raw digipot values (#17536)	4 yıl önce
Scott Lahteine	7aed32df00	Fix SD_FINISHED_RELEASECOMMAND bug Fixes #17401 bug that was introduced in 8f26c3a	4 yıl önce
Ben	df8b7dfc40	Various Laser / Spindle improvements (#15335)	4 yıl önce
InsanityAutomation	3655e240f5	Fix SD finished ExtUI / host action (#17285)	4 yıl önce
Scott Lahteine	118bd2f8b2	Apply loop shorthand macros (#17159)	4 yıl önce
Jason Smith	9c759e5f74	Fix BAUD_RATE_GCODE, etc. (#17135)	4 yıl önce
Scott Lahteine	64d092935b	More useful ENABLED / DISABLED macros (#17054)	4 yıl önce
InsanityAutomation	552f7a91d0	Default on/off for Power Loss Recovery (#17051)	4 yıl önce
Scott Lahteine	b1a50d54e2	HAS_TRINAMIC => HAS_TRINAMIC_CONFIG	4 yıl önce
Scott Lahteine	730804289c	Catch more LPC1768 pin conflicts (#17019)	4 yıl önce
Scott Lahteine	bfad23d3e2	(c) 2020	4 yıl önce
Hans007a	e2eef1256a	G60/G61 Position Save/Restore (#16557)	4 yıl önce
yangwenxiong	248b7dfa59	BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)	4 yıl önce
InsanityAutomation	0fcf2b1110	Quad Z stepper support (#16277)	4 yıl önce
Scott Lahteine	441e822fb3	LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE	5 yıl önce
Bob Kuhn	178dcd6fd8	SPI chaining with TMCStepper simplified interface (#15179)	5 yıl önce
Scott Lahteine	584c86bed1	More "zero extruders" changes (#15213)	5 yıl önce

İlk Önceki 1 2 Sonraki Son

67 İşlemeler (7b9ff164ccabccee77567c2611857e779f36fe48)