Gord Christmas
dc59f07d24
First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.
11 年之前
MaikStohn
9cc15876be
Add support for RUMBA thermocouple add on
11 年之前
Erik van der Zalm
bd2cd4903e
Added #ifdef BARICUDA around the BariCUDA changes
11 年之前
Jordan Miller
fbd899a37d
Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.
11 年之前
gregor
2739c26c4f
changes:
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
11 年之前
gregor
6fb9573157
added support for the reprapworld keypad
11 年之前
Bracken Dawson
d5ee2a5a62
Make Gen7 1.4 heater pins match silkscreen
11 年之前
Colin Edwards
0d075378d5
Add LARGE_FLASH define and enable it for some of the beefier boards
The LARGE_FLASH flag allows superfluous features to be excluded
on boards with less memory
11 年之前
blddk
91bea43332
Added rumba pinout
11 年之前
Dirk Eichel
9a78f321a4
Add pins for Motherboard variant 64
These definition contain also the definition for the graphics LCD.
11 年之前
Dirk Eichel
140e095c6e
Add pins for Motherboard variant 64
These definition contain also the definition for the graphics LCD.
11 年之前
Robert F-C
1292d735ba
Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
11 年之前
Bas Spaans
12c41423ad
Fixed typo in comment
11 年之前
Bas Spaans
0995eaa492
Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries
11 年之前
daid303
408b349a84
Fixed #368 . Commented out the wrong pin definition, but explained why it is there.
11 年之前
Yuri Valentini
86358dd6cd
Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu
11 年之前
daid303
bbe7d3d0fe
Fixed #312
11 年之前
Johann Rocholl
8caf5d252d
Remove bogus blank line.
11 年之前
Johann Rocholl
b39f5d614a
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
11 年之前
oni303
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
11 年之前
daid303
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
11 年之前
Johann Rocholl
ca409e5531
Fix X/Y/Z_MIN_PIN for Printrboard.
11 年之前
Johann Rocholl
33247733e0
Teensylu and Printrboard use different analog pins for thermistors.
11 年之前
Johann Rocholl
6cba11f087
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
11 年之前
Johann Rocholl
4d351b4846
Improved formatting and comments for consistency.
11 年之前
Johann Rocholl
a30007caa4
If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.
11 年之前
Johann Rocholl
b1c38d4c82
Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater.
11 年之前
Johann Rocholl
42e21bb06e
Add support for Printrboard (from https://github.com/lincomatic/Marlin ) and Brainwave (from https://github.com/metrix/Sprinter ).
11 年之前
brupje
57429cb9fe
Fix for keypad
12 年之前
daid303
ffc69537aa
Update on some comments, make the MOTHERBOARD list complete again.
12 年之前
Jonathan Bastien-Filiatrault
0f73afb0b0
Avoid defining overriding definitions for the RepRapDiscount Smart
Controller. Remove common definitions. Harmonize declaration order.
12 年之前
Jonathan Bastien-Filiatrault
36b452c7ac
Remove abbrs.
12 年之前
Jonathan Bastien-Filiatrault
3cbaad9288
RepRapDiscount Smart Controller pin definitions.
12 年之前
Bracken Dawson
f5631a89e8
Add dummy Emergancy Pin to Gen7 1.4
Change required after pulling from ErikZalm.
12 年之前
Bracken Dawson
2873d67b17
Put bogus temp override back in Gen7 up to 1.3
Took out the ifdef when I split 1.4 out and forgot to permanently
define it for <=1.3.
12 年之前
brupje
d07b6e93d5
Add support for Megatronics
12 年之前
johnnyr
8016f058bc
fix max endstop pins
12 年之前
Erik vd Zalm
abf0693e8e
Added KILL_PIN -1 to gen7 boards
12 年之前
Drakelive
d728e35658
Update Marlin/pins.h
12 年之前
tonokip
1c1fddc7ac
Added support for the Rambo reprap electronics board. Added Mcodes to set
motor current and microstepping pins.
12 年之前
Bracken Dawson
47d4f55bc0
Fix Gen7 1.4 pinout
Gen7 1.4 uses very different pin assignments, might as well make a new
section and remove some of the conditionals from each. It's easier to change
your pin assingment this way if like me you don't wire it exactly to plan.
12 年之前
Enchiridion
50cde90324
Added support for dual Z axis stepper drivers
12 年之前
Chris Palmer
538189cc19
Fixed soft limits when the origin is in the middle.
HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.
Saguinololu limit pins change from MIN to MAX according to the homing direction.
12 年之前
Daid
e9bec9b6fe
Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6)
12 年之前
Guan Yang
602c8ee02b
Melzi support
12 年之前
Bernhard
464b755918
added support for the UltiController
12 年之前
Michel Pollet
5550e893d5
New board variant, Open Motion Controller
Open Hardware board currently used by the group build of http://tvrrug.org.uk
The board can be found at http://solderpad.com/folknology/open-motion-controller/
Signed-off-by: Michel Pollet <buserror@gmail.com >
12 年之前
Erik van der Zalm
2e749d60c3
Added DISABLE_MAX_ENDSTOPS
12 年之前
Erik van der Zalm
c077316b2b
Added PID autotune. (experimental)
M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed.
Put these values in Configuration.h
12 年之前
Blair Thompson
02ee9e3d30
Changed Pin Assignment for the RAMPS motherboard so that LCD and Rotary encoder are all wired to AUX-4
This simplifies wiring for those with RAMPS 1.3 and 1.4 boards.
12 年之前