CONSULitAS
ea8409ad5d
Fix: current_command_args contains command
@thinkyhead
Hi Scott,
your code from a0f362c @thinkyhead is great, but you forgot to skip the
command.
Symptom `M117 Test`shows `M117 Test` on LCD instead of `Test`.
see also
https://github.com/MarlinFirmware/Marlin/commit/ a0f362c735
6f8e3c2f17 lines 941, 2851 and so on
Greetings and welcome back
Jochen
преди 8 години
Scott Lahteine
be691b51f1
Remove references to marlinfirmware.org
The domain is gone and doesn’t redirect, so for now show no URL on the boot screen.
преди 8 години
Scott Lahteine
711e5db19a
Tweak comment in process_next_command
преди 8 години
Scott Lahteine
400e9329be
Allow spaces after a code letter
преди 8 години
Scott Lahteine
cdcb80f3c5
Allow no-space after initial command
Addresses issue #2715
преди 8 години
AnHardt
6f473f7fc6
Repair N in ADVANCED_OK
Send the correct line number.
If no N was in the command - non't send an N.
преди 8 години
AnHardt
efbd705eda
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
to avoid senting two "ok"s for a single g-code.
Doing the same for M105 would break the input filters of the hosts.
For M105 the other "ok" is omitted.
преди 8 години
Richard Wackerbarth
f6950acb8e
Residual unused variable — Backport
преди 8 години
AnHardt
57da1b8497
Host parseble output for M109, M190 and M303
Make the output of M105 more similar to Repetier.
Make the text-print pert of M105 an extra function to make it reusable. `print_heaterstates()`
Use `print_heaterstates()` in M019, M190 and M303
преди 8 години
AnHardt
fcceb98191
Unglobalize no_wait_for_cooling
преди 8 години
Richard Wackerbarth
e293ea57f0
Unbalanced brackets in setPwmFrequency
This is a back port of the correct in issue #248
преди 8 години
Scott Lahteine
17c23bbaf3
Shorten gcode_M221 yet function the same
преди 9 години
Scott Lahteine
c0e791dbe9
Only look for "N" line number as first parameter
преди 9 години
Scott Lahteine
b4af4441c5
Clean up watchdog impl.
преди 9 години
Scott Lahteine
9bdab4f3a8
Clean up "else" and other spacing
преди 9 години
Richard Wackerbarth
25d636c9e0
Compiler issues (PR#2696)
преди 9 години
Scott Lahteine
ba6a243197
DEBUG message has no parameter (PR#2671)
преди 9 години
Scott Lahteine
0c7f7ebcfb
Styling adjustments (PR#2668 & PR#2670)
Keep "astyled" reformatting
преди 9 години
fmalpartida
0f149ea0c6
LCD home button causes repeated homing (PR#175)
Fix: increased debounce delay.
преди 9 години
Scott Lahteine
b825567e0f
Drop www. from marlinfirmware.org (PR#175)
преди 9 години
Scott Lahteine
bc50db9cf6
Implement PID_ADD_EXTRUSION_RATE
преди 9 години
Scott Lahteine
fabf3ae4a0
Add final Z raise after Delta probe
преди 9 години
Shane Francis
4c8330c15c
Trim Adjustments for Delta Configurations
преди 9 години
Scott Lahteine
962120d1d2
Fix spacing in some conditional blocks
преди 9 години
Richard Wackerbarth
20b4772155
Create DEBUG_LEVELING_FEATURE
преди 9 години
Scott Lahteine
194f98ff95
Debug messages for homing and leveling
преди 9 години
Richard Wackerbarth
6292d9e815
Rename ENABLE_AUTO_BED_LEVELING
With the introduction of the #if ENABLED(…)
reads better than
преди 9 години
Christian Lefrançois
9897a9147c
Update ABL comments (PR#95)
* Updates the auto bed leveling comments ONLY.
* Renames "Z probe" word usage in //comments and #errors properly.
преди 9 години
Scott Lahteine
23d742bf06
Don't free the stack array plane_equation_coefficients (PR#83)
преди 9 години
Scott Lahteine
e3b1e08777
Patch G30 to use raise_z_for_servo (PR#73)
преди 9 години
Scott Lahteine
a1eb90d5c0
Save another 30 bytes in gcode_SET_Z_PROBE_OFFSET
преди 9 години
Scott Lahteine
91122277f4
Reduce gcode_SET_Z_PROBE_OFFSET by 88 bytes
преди 9 години
AnHardt
5707a2c3d5
indexindexIntoAB is only vald for !DELTA
преди 9 години
AnHardt
d8860f9ad9
Alway end at the same point
Always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION]
Regardles the evennes of auto_bed_leveling_grid_points.
преди 9 години
AnHardt
4ca8f4a9a7
Always zigzag
Use the shortest way between probing-points.
преди 9 години
AnHardt
3d23424121
Add array indexIntoAB[xx][yy]
and use it.
преди 9 години
AnHardt
e2d69f66b2
Make Z_PROBE a Z_MIN_PROBE (PR#65)
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.
Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX check for the probe in update_endstops().
Using an delta related idea of @clefranc from #61 ,
extended to the general change for all setups.
Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc 's delta.
преди 9 години
Richard Wackerbarth
9d8cc24abf
Continue from the line following the M999 (PR#60)
If the printer is going to accept the M999,
then it should continue from that line number.
преди 9 години
Scott Lahteine
46453905d6
Apply remaining ENABLED/DISABLED conditionals
преди 9 години
Richard Wackerbarth
b227d8c128
Supply a VERSION in a short form for displays
The long descriptor will still be available in M115
преди 9 години
AnHardt
4f46df5dab
Make bootscreen configurable for the graphic displays
Saves about 473 byte of progmem and 28 bytes of RAM.
преди 9 години
Scott Lahteine
b4abb0ae7f
Apply ENABLED / DISABLED to Marlin core files (PR#2558)
преди 9 години
Scott Lahteine
9d151bb61b
servo_endstop_angles -> servo_endstop_angle
преди 9 години
Scott Lahteine
1f63293624
servo_endstops -> servo_endstop_id
преди 9 години
Scott Lahteine
ed4a6371ad
Add HAS_SERVO_ENDSTOPS to simplify conditonals
преди 9 години
Scott Lahteine
ae9274be05
Fix minor compiler warnings in for loops
преди 9 години
Scott Lahteine
4a58e447a1
Add array size to servo_endstop_angles (PR#2553)
преди 9 години
AnHardt
d03f037a92
Get rid of malloc() and free() (PR#2549)
Just the minimal changes to qr_solve.cpp and .h to get rid of malloc() and free().
Saves about 656 bytes of progmem (library-code)
and 22 bytes for static variables.
Should use exactly the same amount of stack as it did before on the heap.
преди 9 години
Scott Lahteine
3b2b2313ff
Combine if block related to SERVO_ENDSTOPS
преди 9 години
Scott Lahteine
0af2a80e06
Make SERVO_ENDSTOP_ANGLES 2-dimensional
преди 9 години