marlin

提交線圖

作者	SHA1	備註	提交日期
daid303	f6ff0ab767	signed/unsigned fixes.	12 年之前
daid303	b6ff45254e	Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog.	12 年之前
daid303	7e348fcb5f	By mistake enabled the watchdog by default. This should be off by default.	12 年之前
daid303	06b58a9c4f	First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.	12 年之前
Mark Finn	04631d2250	cleanup for pull	12 年之前
ZetaPhoenix	c6caa45ae2	Limit Switch locations based on MIN/MAX limits and homing direction fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined. Relocated code based on feedback.	12 年之前
tonokip	1c1fddc7ac	Added support for the Rambo reprap electronics board. Added Mcodes to set motor current and microstepping pins.	12 年之前
Enchiridion	50cde90324	Added support for dual Z axis stepper drivers	12 年之前
daid	12de8fff81	Support step motor controllers with active low step pins.	12 年之前
Bernhard	0c123950e9	__ header file replace	12 年之前
Bernhard	bf077125b9	added firmware retract. disabled by default	12 年之前
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	12 年之前
Erik van der Zalm	4ca2f336f0	Changed default MINIMUM_PLANNER_SPEED -> 0.05 Fixed small bug in arcs M105 prints now actual_temp/target_temp	12 年之前
Bernhard	1532200435	found error in filenames. One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely	12 年之前
Erik van der Zalm	87ff2f8867	Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)	12 年之前
Erik van der Zalm	c6f2ec3c82	remove stop_heating_wait	12 年之前
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) Included AD595 calibration options. (daid)	12 年之前
Blair Thompson	d9f2f509d5	Added new menu items under the prepare submenu. Instead of a single pre-heat, now there is pre-heat ABS and PLA options Added defines to the configuration file to adjust preheat temperatures for both	12 年之前
Erik van der Zalm	8816ef1c64	Small fixes after merge	12 年之前
Erik van der Zalm	b447815de5	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	12 年之前
Erik van der Zalm	13e185d330	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	12 年之前
Erik van der Zalm	5113513cb2	RC 1	12 年之前
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. One for common settings. One for advanced settings.	12 年之前

24 次程式碼提交 (c4217744224bf91b7f1cb5b63c58d287d75742bf)