/* ******************************************************************************* * Copyright (c) 2017, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #include "pins_arduino.h" #ifdef __cplusplus extern "C" { #endif #if defined(ARDUINO_BLACK_F407VE) || defined(ARDUINO_BLACK_F407VG) // Pin number // This array allows to wrap Arduino pin number(Dx or x) // to STM32 PinName (PX_n) const PinName digitalPin[] = { // Right Side //Int //Ext //3V3 //3V3 //3V3 //3V3 //BOOT0 //BOOT1 //GND //GND //GND //GND PE_1, PE_0, // D0, D1 PB_9, PB_8, PB_7, PB_6, PB_5, PB_3, PD_7, PD_6, PD_5, PD_4, // D10, D11 PD_3, PD_2, PD_1, PD_0, PC_12, PC_11, PC_10, PA_15, PA_12, PA_11, // D20, D21 PA_11: USB_DM, PA_12: USB_DP PA_10, PA_9, PA_8, PC_9, PC_8, PC_7, PC_6, PD_15, PD_14, PD_13, // D30, D31 PD_12, PD_11, PD_10, PD_9, PD_8, PB_15, // Left Side //Ext //Int //5V //5V //5V //5V //3V3 //3V3 //3V3 //3V3 //GND //GND PE_2, PE_3, PE_4, PE_5, // D40, D41 PE_4: BUT K0, PE_5: BUT K1 PE_6, PC_13, PC_0, PC_1, PC_2, PC_3, //VREF- //VREF+ PA_0, PA_1, // PA_0(WK_UP): BUT K_UP) PA_2, PA_3, // D50, D51 PA_4, PA_5, /*PA_6, PA_7,*/ // PA_6, PA_7: Moved to allow contiguous analog pins PC_4, PC_5, PB_0, PB_1, PA_6, PA_7, // PA_6: LED D2, PA_7: LED D3 (active LOW) PE_7, PE_8, // D60, D61 PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15, PB_10, PB_11, PB_12, // D70, D71 PB_13, PB_14, PB_4, }; #endif // ARDUINO_BLACK_F407VE || ARDUINO_BLACK_F407VG #if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG) const PinName digitalPin[] = { // Left Side //Ext //Int //GND //5V //GND //3V3 PB_12, PB_13, PB_14, PB_15, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14, PD_15, PG_2, PG_3, PG_4, PG_5, PG_6, PG_7, PG_8, PC_6, PC_7, PC_8, PC_9, PA_8, PA_9, PA_10, PA_11, PA_12, // PA_11: USB_DM, PA_12: USB_DP PA_13, PA_14, PA_15, PC_10, PC_11, PC_12, PD_0, PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PG_9, PG_10, PG_11, PG_12, PG_13, PG_14, PG_15, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, // Right Side //Int //Ext //3V3 //3V3 //BOOT1 //BOOT0 //GND //GND //VREF+ //GND PB_10, PB_11, PE_14, PE_15, PE_12, PE_13, PE_10, PE_11, PE_8, PE_9, PG_1, PE_7, PF_15, PG_0, PF_13, PF_14, PF_11, PF_12, PB_2, // PB1 PB2 Inverted to allow contiguous analog pins PB_1, PC_5, PB_0, PA_7, PC_4, PA_5, PA_6, PA_3, PA_4, PA_1, PA_2, PC_3, PA_0, // PA_0(WK_UP): BUT K_UP) PC_1, PC_2, /*PF_10,*/PC_0, // PF_10: Moved to allow contiguous analog pins PF_8, /*PF_9,*/ // PF_9: Moved to allow contiguous analog pins PF_6, PF_7, PF_10, PF_9, // PF_10: LED D2, PF_9: LED D1 (active low) PF_4, PF_5, PF_2, PF_3, PF_0, PF_1, PE_6, PC_13, PE_4, PE_5, // PE_4: BUT K0, PE_5: BUT K1 PE_2, PE_3, PE_0, PE_1, }; #endif // ARDUINO_BLACK_F407ZE || ARDUINO_BLACK_F407ZG #ifdef __cplusplus } #endif // ---------------------------------------------------------------------------- #ifdef __cplusplus extern "C" { #endif /** * @brief System Clock Configuration * @param None * @retval None */ WEAK void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct; RCC_ClkInitTypeDef RCC_ClkInitStruct; /**Configure the main internal regulator output voltage */ __HAL_RCC_PWR_CLK_ENABLE(); __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); /**Initializes the CPU, AHB and APB busses clocks */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLM = 8; RCC_OscInitStruct.PLL.PLLN = 336; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; RCC_OscInitStruct.PLL.PLLQ = 7; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { _Error_Handler(__FILE__, __LINE__); } /**Initializes the CPU, AHB and APB busses clocks */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) { _Error_Handler(__FILE__, __LINE__); } /**Configure the Systick interrupt time */ HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000); /**Configure the Systick */ HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK); /* SysTick_IRQn interrupt configuration */ HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); } #ifdef __cplusplus } #endif