/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments * * Applies to the following boards: * * RAMPS_14_EFB (Hotend, Fan, Bed) * RAMPS_14_EEB (Hotend0, Hotend1, Bed) * RAMPS_14_EFF (Hotend, Fan0, Fan1) * RAMPS_14_EEF (Hotend0, Hotend1, Fan) * RAMPS_14_SF (Spindle, Controller Fan) * * RAMPS_13_EFB (Hotend, Fan, Bed) * RAMPS_13_EEB (Hotend0, Hotend1, Bed) * RAMPS_13_EFF (Hotend, Fan0, Fan1) * RAMPS_13_EEF (Hotend0, Hotend1, Fan) * RAMPS_13_SF (Spindle, Controller Fan) * * Other pins_MYBOARD.h files may override these defaults * * Differences between * RAMPS_13 | RAMPS_14 * 7 | 11 */ #if ENABLED(AZSMZ_12864) && DISABLED(ALLOW_SAM3X8E) #error "No pins defined for RAMPS with AZSMZ_12864." #endif #include "env_validate.h" // Custom flags and defines for the build //#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__ #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "RAMPS 1.4" #endif // // Servos // #ifndef SERVO0_PIN #ifdef IS_RAMPS_13 #define SERVO0_PIN 7 #else #define SERVO0_PIN 11 #endif #endif #ifndef SERVO1_PIN #define SERVO1_PIN 6 #endif #ifndef SERVO2_PIN #define SERVO2_PIN 5 #endif #ifndef SERVO3_PIN #define SERVO3_PIN 4 #endif // // Foam Cutter requirements // #if ENABLED(FOAMCUTTER_XYUV) #ifndef MOSFET_C_PIN #define MOSFET_C_PIN -1 #endif #if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) && NUM_SERVOS < 2 #define SPINDLE_LASER_PWM_PIN 8 // Hardware PWM #endif #ifndef Z_MIN_PIN #define Z_MIN_PIN -1 #endif #ifndef Z_MAX_PIN #define Z_MAX_PIN -1 #endif #ifndef I_STOP_PIN #define I_STOP_PIN 18 #endif #ifndef J_STOP_PIN #define J_STOP_PIN 19 #endif #endif // // Limit Switches // #ifndef X_STOP_PIN #ifndef X_MIN_PIN #define X_MIN_PIN 3 #endif #ifndef X_MAX_PIN #define X_MAX_PIN 2 #endif #endif #ifndef Y_STOP_PIN #ifndef Y_MIN_PIN #define Y_MIN_PIN 14 #endif #ifndef Y_MAX_PIN #define Y_MAX_PIN 15 #endif #endif #ifndef Z_STOP_PIN #ifndef Z_MIN_PIN #define Z_MIN_PIN 18 #endif #ifndef Z_MAX_PIN #define Z_MAX_PIN 19 #endif #endif // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // #define X_STEP_PIN 54 #define X_DIR_PIN 55 #define X_ENABLE_PIN 38 #ifndef X_CS_PIN #define X_CS_PIN 53 #endif #define Y_STEP_PIN 60 #define Y_DIR_PIN 61 #define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN #define Y_CS_PIN 49 #endif #ifndef Z_STEP_PIN #define Z_STEP_PIN 46 #endif #ifndef Z_DIR_PIN #define Z_DIR_PIN 48 #endif #ifndef Z_ENABLE_PIN #define Z_ENABLE_PIN 62 #endif #ifndef Z_CS_PIN #define Z_CS_PIN 40 #endif #ifndef E0_STEP_PIN #define E0_STEP_PIN 26 #endif #ifndef E0_DIR_PIN #define E0_DIR_PIN 28 #endif #ifndef E0_ENABLE_PIN #define E0_ENABLE_PIN 24 #endif #ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif #ifndef E1_STEP_PIN #define E1_STEP_PIN 36 #endif #ifndef E1_DIR_PIN #define E1_DIR_PIN 34 #endif #ifndef E1_ENABLE_PIN #define E1_ENABLE_PIN 30 #endif #ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif // // Temperature Sensors // #ifndef TEMP_0_PIN #define TEMP_0_PIN 13 // Analog Input #endif #ifndef TEMP_1_PIN #define TEMP_1_PIN 15 // Analog Input #endif #ifndef TEMP_BED_PIN #define TEMP_BED_PIN 14 // Analog Input #endif // // SPI for MAX Thermocouple // #ifndef TEMP_0_CS_PIN #define TEMP_0_CS_PIN 66 // Don't use 53 if using Display/SD card (SDSS) or 49 (SD_DETECT_PIN) #endif // // Heaters / Fans // #ifndef MOSFET_A_PIN #define MOSFET_A_PIN 10 #endif #ifndef MOSFET_B_PIN #define MOSFET_B_PIN 9 #endif #ifndef MOSFET_C_PIN #define MOSFET_C_PIN 8 #endif #ifndef MOSFET_D_PIN #define MOSFET_D_PIN -1 #endif #define HEATER_0_PIN MOSFET_A_PIN #if FET_ORDER_EFB // Hotend, Fan, Bed #define HEATER_BED_PIN MOSFET_C_PIN #elif FET_ORDER_EEF // Hotend, Hotend, Fan #define HEATER_1_PIN MOSFET_B_PIN #elif FET_ORDER_EEB // Hotend, Hotend, Bed #define HEATER_1_PIN MOSFET_B_PIN #define HEATER_BED_PIN MOSFET_C_PIN #elif FET_ORDER_EFF // Hotend, Fan, Fan #define FAN1_PIN MOSFET_C_PIN #elif DISABLED(FET_ORDER_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") #define HEATER_BED_PIN MOSFET_C_PIN #if EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) #define HEATER_1_PIN MOSFET_D_PIN #else #define FAN1_PIN MOSFET_D_PIN #endif #endif #ifndef FAN_PIN #if EITHER(FET_ORDER_EFB, FET_ORDER_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan #define FAN_PIN MOSFET_B_PIN #elif EITHER(FET_ORDER_EEF, FET_ORDER_SF) // Hotend, Hotend, Fan or Spindle, Fan #define FAN_PIN MOSFET_C_PIN #elif FET_ORDER_EEB // Hotend, Hotend, Bed #define FAN_PIN 4 // IO pin. Buffer needed #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") #define FAN_PIN MOSFET_B_PIN #endif #endif // // Misc. Functions // #ifndef SDSS #define SDSS AUX3_06_PIN #endif #define LED_PIN 13 #ifndef FILWIDTH_PIN #define FILWIDTH_PIN 5 // Analog Input on AUX2 #endif // RAMPS 1.4 DIO 4 on the servos connector #ifndef FIL_RUNOUT_PIN #define FIL_RUNOUT_PIN 4 #endif #ifndef PS_ON_PIN #define PS_ON_PIN 12 #endif #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) #if NUM_SERVOS <= 1 // Prefer the servo connector #define CASE_LIGHT_PIN 6 // Hardware PWM #elif HAS_FREE_AUX2_PINS #define CASE_LIGHT_PIN 44 // Hardware PWM #endif #endif // // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) #if NUM_SERVOS < 2 // Use servo connector if possible #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! #ifndef SPINDLE_LASER_PWM_PIN #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM #endif #define SPINDLE_DIR_PIN 5 #elif HAS_FREE_AUX2_PINS #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM #define SPINDLE_DIR_PIN 65 #else #error "No auto-assignable Spindle/Laser pins available." #endif #endif // // TMC software SPI // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI #define TMC_SW_MOSI 66 #endif #ifndef TMC_SW_MISO #define TMC_SW_MISO 44 #endif #ifndef TMC_SW_SCK #define TMC_SW_SCK 64 #endif #endif #if HAS_TMC_UART /** * TMC2208/TMC2209 stepper drivers * * Hardware serial communication ports. * If undefined software serial is used according to the pins below * * Serial2 -- AUX-4 Pin 18 (D16 TX2) and AUX-4 Pin 17 (D17 RX2) * Serial1 -- Pins D18 and D19 are used for Z-MIN and Z-MAX */ //#define X_HARDWARE_SERIAL Serial1 //#define X2_HARDWARE_SERIAL Serial1 //#define Y_HARDWARE_SERIAL Serial1 //#define Y2_HARDWARE_SERIAL Serial1 //#define Z_HARDWARE_SERIAL Serial1 //#define Z2_HARDWARE_SERIAL Serial1 //#define E0_HARDWARE_SERIAL Serial1 //#define E1_HARDWARE_SERIAL Serial1 //#define E2_HARDWARE_SERIAL Serial1 //#define E3_HARDWARE_SERIAL Serial1 //#define E4_HARDWARE_SERIAL Serial1 #ifndef X_SERIAL_TX_PIN #define X_SERIAL_TX_PIN 40 #endif #ifndef X_SERIAL_RX_PIN #define X_SERIAL_RX_PIN 63 #endif #ifndef X2_SERIAL_TX_PIN #define X2_SERIAL_TX_PIN -1 #endif #ifndef X2_SERIAL_RX_PIN #define X2_SERIAL_RX_PIN -1 #endif #ifndef Y_SERIAL_TX_PIN #define Y_SERIAL_TX_PIN 59 #endif #ifndef Y_SERIAL_RX_PIN #define Y_SERIAL_RX_PIN 64 #endif #ifndef Y2_SERIAL_TX_PIN #define Y2_SERIAL_TX_PIN -1 #endif #ifndef Y2_SERIAL_RX_PIN #define Y2_SERIAL_RX_PIN -1 #endif #ifndef Z_SERIAL_TX_PIN #define Z_SERIAL_TX_PIN 42 #endif #ifndef Z_SERIAL_RX_PIN #define Z_SERIAL_RX_PIN 65 #endif #ifndef Z2_SERIAL_TX_PIN #define Z2_SERIAL_TX_PIN -1 #endif #ifndef Z2_SERIAL_RX_PIN #define Z2_SERIAL_RX_PIN -1 #endif #ifndef E0_SERIAL_TX_PIN #define E0_SERIAL_TX_PIN 44 #endif #ifndef E0_SERIAL_RX_PIN #define E0_SERIAL_RX_PIN 66 #endif #ifndef E1_SERIAL_TX_PIN #define E1_SERIAL_TX_PIN -1 #endif #ifndef E1_SERIAL_RX_PIN #define E1_SERIAL_RX_PIN -1 #endif #ifndef E2_SERIAL_TX_PIN #define E2_SERIAL_TX_PIN -1 #endif #ifndef E2_SERIAL_RX_PIN #define E2_SERIAL_RX_PIN -1 #endif #ifndef E3_SERIAL_TX_PIN #define E3_SERIAL_TX_PIN -1 #endif #ifndef E3_SERIAL_RX_PIN #define E3_SERIAL_RX_PIN -1 #endif #ifndef E4_SERIAL_TX_PIN #define E4_SERIAL_TX_PIN -1 #endif #ifndef E4_SERIAL_RX_PIN #define E4_SERIAL_RX_PIN -1 #endif #ifndef E5_SERIAL_TX_PIN #define E5_SERIAL_TX_PIN -1 #endif #ifndef E5_SERIAL_RX_PIN #define E5_SERIAL_RX_PIN -1 #endif #ifndef E6_SERIAL_TX_PIN #define E6_SERIAL_TX_PIN -1 #endif #ifndef E6_SERIAL_RX_PIN #define E6_SERIAL_RX_PIN -1 #endif #ifndef E7_SERIAL_TX_PIN #define E7_SERIAL_TX_PIN -1 #endif #ifndef E7_SERIAL_RX_PIN #define E7_SERIAL_RX_PIN -1 #endif #endif // // Průša i3 MK2 Multiplexer Support // #if HAS_PRUSA_MMU1 #ifndef E_MUX0_PIN #define E_MUX0_PIN 40 // Z_CS_PIN #endif #ifndef E_MUX1_PIN #define E_MUX1_PIN 42 // E0_CS_PIN #endif #ifndef E_MUX2_PIN #define E_MUX2_PIN 44 // E1_CS_PIN #endif #endif // // AUX1 5V GND D2 D1 // 2 4 6 8 // 1 3 5 7 // 5V GND A3 A4 // #define AUX1_05_PIN 57 // (A3) #define AUX1_06_PIN 2 #define AUX1_07_PIN 58 // (A4) #define AUX1_08_PIN 1 // // AUX2 GND A9 D40 D42 A11 // 2 4 6 8 10 // 1 3 5 7 9 // VCC A5 A10 D44 A12 // #define AUX2_03_PIN 59 // (A5) #define AUX2_04_PIN 63 // (A9) #define AUX2_05_PIN 64 // (A10) #define AUX2_06_PIN 40 #define AUX2_07_PIN 44 #define AUX2_08_PIN 42 #define AUX2_09_PIN 66 // (A12) #define AUX2_10_PIN 65 // (A11) // // AUX3 GND D52 D50 5V // 7 5 3 1 // 8 6 4 2 // NC D53 D51 D49 // #define AUX3_02_PIN 49 #define AUX3_03_PIN 50 #define AUX3_04_PIN 51 #define AUX3_05_PIN 52 #define AUX3_06_PIN 53 // // AUX4 5V GND D32 D47 D45 D43 D41 D39 D37 D35 D33 D31 D29 D27 D25 D23 D17 D16 // #define AUX4_03_PIN 32 #define AUX4_04_PIN 47 #define AUX4_05_PIN 45 #define AUX4_06_PIN 43 #define AUX4_07_PIN 41 #define AUX4_08_PIN 39 #define AUX4_09_PIN 37 #define AUX4_10_PIN 35 #define AUX4_11_PIN 33 #define AUX4_12_PIN 31 #define AUX4_13_PIN 29 #define AUX4_14_PIN 27 #define AUX4_15_PIN 25 #define AUX4_16_PIN 23 #define AUX4_17_PIN 17 #define AUX4_18_PIN 16 /** * LCD adapters come in different variants. The socket keys can be * on either side, and may be backwards on some boards / displays. */ #ifndef EXP1_08_PIN #define EXP1_03_PIN AUX4_17_PIN #define EXP1_04_PIN AUX4_18_PIN #define EXP1_05_PIN AUX4_16_PIN #define EXP1_06_PIN AUX4_15_PIN #define EXP1_07_PIN AUX4_14_PIN #define EXP1_08_PIN AUX4_13_PIN #define EXP2_01_PIN AUX3_03_PIN #define EXP2_02_PIN AUX3_05_PIN #define EXP2_04_PIN AUX3_06_PIN #define EXP2_06_PIN AUX3_04_PIN #define EXP2_07_PIN AUX3_02_PIN #if ENABLED(G3D_PANEL) /** Gadgets3D Smart Adapter * ------ ------ * 4-11 | 1 2 | 4-12 (MISO) 3-03 | 1 2 | 3-05 (SCK) * 4-17 | 3 4 | 4-18 4-10 | 3 4 | 3-06 * 4-16 5 6 | 4-15 4-09 5 6 | 3-04 (MOSI) * 4-14 | 7 8 | 4-13 3-02 | 7 8 | 4-07 * (GND) 4-02 | 9 10 | 4-01 (5V) -- | 9 10 | -- * ------ ------ * EXP1 EXP2 */ #define EXP1_01_PIN AUX4_11_PIN #define EXP1_02_PIN AUX4_12_PIN #define EXP2_03_PIN AUX4_10_PIN #define EXP2_05_PIN AUX4_09_PIN #define EXP2_08_PIN AUX4_07_PIN #else /** Smart Adapter (c) RRD * ------ ------ * 4-09 | 1 2 | 4-10 (MISO) 3-03 | 1 2 | 3-05 (SCK) * 4-17 | 3 4 | 4-18 4-12 | 3 4 | 3-06 * 4-16 5 6 | 4-15 4-11 5 6 | 3-04 (MOSI) * 4-14 | 7 8 | 4-13 3-02 | 7 8 | 4-07 * (GND) 3-07 | 9 10 | 3-01 (5V) (GND) 3-07 | 9 10 | -- * ------ ------ * EXP1 EXP2 */ #define EXP1_01_PIN AUX4_09_PIN #define EXP1_02_PIN AUX4_10_PIN #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #define EXP2_03_PIN AUX4_11_PIN #define EXP2_05_PIN AUX4_12_PIN #define EXP2_08_PIN -1 // RESET #else #define EXP2_03_PIN AUX4_12_PIN #define EXP2_05_PIN AUX4_11_PIN #define EXP2_08_PIN AUX4_07_PIN #endif #endif #endif ////////////////////////// // LCDs and Controllers // ////////////////////////// #if HAS_WIRED_LCD //#define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270 // // LCD Display output pins // #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS EXP2_07_PIN // CS chip select /SS chip slave select #define LCD_PINS_ENABLE EXP2_06_PIN // SID (MOSI) #define LCD_PINS_D4 EXP2_02_PIN // SCK (CLK) clock #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS AUX2_06_PIN #define LCD_PINS_ENABLE AUX2_08_PIN #define LCD_PINS_D4 AUX2_10_PIN #define LCD_PINS_D5 AUX2_09_PIN #define LCD_PINS_D6 AUX2_07_PIN #define LCD_PINS_D7 AUX2_05_PIN #elif ENABLED(TFTGLCD_PANEL_SPI) #define TFTGLCD_CS EXP2_05_PIN #else #if ENABLED(CR10_STOCKDISPLAY) #define LCD_PINS_RS EXP1_07_PIN #define LCD_PINS_ENABLE EXP1_08_PIN #define LCD_PINS_D4 EXP1_06_PIN #if !IS_NEWPANEL #define BEEPER_PIN EXP1_01_PIN #endif #elif ENABLED(ZONESTAR_LCD) #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING #error "CAUTION! ZONESTAR_LCD on RAMPS requires wiring modifications. It plugs into AUX2 but GND and 5V need to be swapped. See 'pins_RAMPS.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)" #endif #define LCD_PINS_RS AUX2_05_PIN #define LCD_PINS_ENABLE AUX2_07_PIN #define LCD_PINS_D4 AUX2_04_PIN #define LCD_PINS_D5 AUX2_06_PIN #define LCD_PINS_D6 AUX2_08_PIN #define LCD_PINS_D7 AUX2_10_PIN #elif ENABLED(AZSMZ_12864) // Pins only defined for RAMPS_SMART currently #else #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) #define LCD_PINS_DC EXP1_06_PIN // Set as output on init #define LCD_PINS_RS EXP1_07_PIN // Pull low for 1s to init // DOGM SPI LCD Support #define DOGLCD_A0 LCD_PINS_DC #define DOGLCD_CS EXP1_04_PIN #define DOGLCD_MOSI EXP1_03_PIN #define DOGLCD_SCK EXP1_05_PIN #else #define LCD_PINS_RS EXP1_04_PIN #define LCD_PINS_ENABLE EXP1_03_PIN #define LCD_PINS_D4 EXP1_05_PIN #define LCD_PINS_D5 EXP1_06_PIN #define LCD_PINS_D6 EXP1_07_PIN #endif #define LCD_PINS_D7 EXP1_08_PIN #if !IS_NEWPANEL #define BEEPER_PIN EXP2_05_PIN #endif #endif #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK_PIN 38 //#define SHIFT_LD_PIN AUX2_08_PIN //#define SHIFT_OUT_PIN AUX2_06_PIN //#define SHIFT_EN_PIN EXP1_03_PIN #endif #endif #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder #endif // // LCD Display input pins // #if IS_NEWPANEL #if IS_RRD_SC #define BEEPER_PIN EXP1_01_PIN #if ENABLED(CR10_STOCKDISPLAY) #define BTN_EN1 EXP1_03_PIN #define BTN_EN2 EXP1_05_PIN #else #define BTN_EN1 EXP2_03_PIN #define BTN_EN2 EXP2_05_PIN #endif #define BTN_ENC EXP1_02_PIN #ifndef SD_DETECT_PIN #define SD_DETECT_PIN EXP2_07_PIN #endif #ifndef KILL_PIN #define KILL_PIN EXP2_08_PIN #endif #if ENABLED(BQ_LCD_SMART_CONTROLLER) #define LCD_BACKLIGHT_PIN AUX4_08_PIN #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define BTN_EN1 AUX2_05_PIN #define BTN_EN2 AUX2_03_PIN #define BTN_ENC AUX2_04_PIN #define SD_DETECT_PIN AUX2_08_PIN #elif ENABLED(LCD_I2C_PANELOLU2) #define BTN_EN1 AUX4_04_PIN #define BTN_EN2 AUX4_06_PIN #define BTN_ENC AUX4_03_PIN #define LCD_SDSS SDSS #define KILL_PIN EXP2_08_PIN #elif ENABLED(LCD_I2C_VIKI) #define BTN_EN1 AUX2_06_PIN // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains AUX2-06 and AUX2-08. #define BTN_EN2 AUX2_08_PIN #define BTN_ENC -1 #define LCD_SDSS SDSS #define SD_DETECT_PIN EXP2_07_PIN #elif EITHER(VIKI2, miniVIKI) #define DOGLCD_CS AUX4_05_PIN #define DOGLCD_A0 AUX2_07_PIN #define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270 #define BEEPER_PIN EXP2_05_PIN #define STAT_LED_RED_PIN AUX4_03_PIN #define STAT_LED_BLUE_PIN EXP1_02_PIN #define BTN_EN1 22 #define BTN_EN2 7 #define BTN_ENC AUX4_08_PIN #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board #define KILL_PIN EXP2_03_PIN #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #define DOGLCD_CS EXP1_08_PIN #define DOGLCD_A0 EXP1_07_PIN #define BEEPER_PIN EXP1_05_PIN #define LCD_BACKLIGHT_PIN EXP2_05_PIN #define BTN_EN1 EXP1_02_PIN #define BTN_EN2 EXP1_01_PIN #define BTN_ENC EXP2_03_PIN #define LCD_SDSS SDSS #define SD_DETECT_PIN EXP2_07_PIN #define KILL_PIN EXP2_08_PIN #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864) #define BEEPER_PIN EXP1_01_PIN #define BTN_ENC EXP1_02_PIN #ifndef SD_DETECT_PIN #define SD_DETECT_PIN EXP2_07_PIN #endif #ifndef KILL_PIN #define KILL_PIN EXP2_08_PIN #endif #if ENABLED(MKS_MINI_12864) #define DOGLCD_A0 EXP1_07_PIN #define DOGLCD_CS EXP1_06_PIN // not connected to a pin #define LCD_BACKLIGHT_PIN -1 // 65 (MKS mini12864 can't adjust backlight by software!) #define BTN_EN1 EXP2_03_PIN #define BTN_EN2 EXP2_05_PIN #elif ENABLED(FYSETC_MINI_12864) // From https://wiki.fysetc.com/Mini12864_Panel/ #define DOGLCD_A0 EXP1_04_PIN #define DOGLCD_CS EXP1_03_PIN #define BTN_EN1 EXP2_05_PIN #define BTN_EN2 EXP2_03_PIN //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems // results in LCD soft SPI mode 3, SD soft SPI mode 0 #define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN #define RGB_LED_R_PIN EXP1_06_PIN #endif #ifndef RGB_LED_G_PIN #define RGB_LED_G_PIN EXP1_07_PIN #endif #ifndef RGB_LED_B_PIN #define RGB_LED_B_PIN EXP1_08_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) #define NEOPIXEL_PIN EXP1_06_PIN #endif #endif #elif ENABLED(MINIPANEL) #define BEEPER_PIN AUX2_08_PIN #define LCD_BACKLIGHT_PIN AUX2_10_PIN #define DOGLCD_A0 AUX2_07_PIN #define DOGLCD_CS AUX2_09_PIN #define BTN_EN1 AUX2_06_PIN #define BTN_EN2 AUX2_04_PIN #define BTN_ENC AUX2_03_PIN #define SD_DETECT_PIN AUX3_02_PIN #define KILL_PIN AUX2_05_PIN #elif ENABLED(ZONESTAR_LCD) #define ADC_KEYPAD_PIN 12 #elif ENABLED(AZSMZ_12864) // Pins only defined for RAMPS_SMART currently #elif ENABLED(G3D_PANEL) #define BEEPER_PIN EXP1_01_PIN #define SD_DETECT_PIN EXP2_07_PIN #define KILL_PIN EXP2_08_PIN #define BTN_EN1 EXP2_05_PIN #define BTN_EN2 EXP2_03_PIN #define BTN_ENC EXP1_02_PIN #elif IS_TFTGLCD_PANEL #define SD_DETECT_PIN EXP2_07_PIN #else #define BEEPER_PIN EXP2_05_PIN #if ENABLED(PANEL_ONE) // Buttons connect directly to AUX-2 #define BTN_EN1 AUX2_03_PIN #define BTN_EN2 AUX2_04_PIN #define BTN_ENC AUX3_02_PIN #else #define BTN_EN1 EXP1_01_PIN #define BTN_EN2 EXP1_02_PIN #define BTN_ENC EXP2_03_PIN #endif #endif #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD #if IS_RRW_KEYPAD && !HAS_ADC_BUTTONS #define SHIFT_OUT_PIN AUX2_06_PIN #define SHIFT_CLK_PIN AUX2_07_PIN #define SHIFT_LD_PIN AUX2_08_PIN #ifndef BTN_EN1 #define BTN_EN1 AUX2_05_PIN #endif #ifndef BTN_EN2 #define BTN_EN2 AUX2_03_PIN #endif #ifndef BTN_ENC #define BTN_ENC AUX2_04_PIN #endif #endif #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)" #endif /** * FYSETC TFT-81050 display pinout * * Board Display * ------ ------ * (MISO) 50 | 1 2 | 52 (SCK) 5V |10 9 | GND * (LCD_CS) 33 | 3 4 | 53 (SD_CS) RESET | 8 7 | (SD_DET) * 31 5 6 | 51 (MOSI) (MOSI) 6 5 | (LCD_CS) * (SD_DET) 49 | 7 8 | RESET (SD_CS) | 4 3 | (MOD_RESET) * GND | 9 10 | -- (SCK) | 2 1 | (MISO) * ------ ------ * EXP2 EXP1 * * Needs custom cable: * * Board Adapter Display * ---------------------------------- * EXP2-1 <--diode--- EXP1-1 MISO * EXP2-2 ----------- EXP1-2 SCK * EXP2-4 ----------- EXP1-3 MOD_RST * EXP2-4 ----------- EXP1-4 SD_CS * EXP2-3 ----------- EXP1-5 LCD_CS * EXP2-6 ----------- EXP1-6 MOSI * EXP2-7 ----------- EXP1-7 SD DET * EXP2-8 ----------- EXP1-8 RESET * EXP2-1 ----------- EXP1-9 MISO->GND * EXP1-10 ---------- EXP1-10 5V * * NOTE: The MISO pin should not get a 5V signal. * To fix, insert a 1N4148 diode in the MISO line. */ #define BEEPER_PIN EXP1_01_PIN #define SD_DETECT_PIN EXP2_07_PIN #define CLCD_MOD_RESET EXP2_05_PIN #define CLCD_SPI_CS EXP2_03_PIN #endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050