/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#pragma once

/****************************************************************************************
* Teensy 4.1 (IMXRT1062) Breadboard pin assignments
* Requires the Teensyduino software with Teensy 4.1 selected in Arduino IDE!
* https://www.pjrc.com/teensy/teensyduino.html
****************************************************************************************/

#if NOT_TARGET(IS_TEENSY41)
  #error "Oops! Select 'Teensy 4.1' in 'Tools > Board.'"
#endif

#define BOARD_INFO_NAME "Teensy4.1"

/**
 * Plan for Teensy 4.0 and Teensy 4.1:
 *                                     USB
 *                          GND |-----#####-----| VIN (3.65 TO 5.5V)
 *    RX1   CS1     RX1  PWM  0 |     #####     | GND
 *    TX1   MISO1   TX1  PWM  1 |               | 3.3V
 *    STPX               PWM  2 |               | 23  A9 PWM
 *    DIRX               PWM  3 |               | 22  A8 PWM              LIMZ
 *    STPY               PWM  4 |               | 21  A7      RX5         LIMY
 *    DIRY               PWM  5 |               | 20  A6      TX5         LIMX
 *    STPZ               PWM  6 |               | 19  A5 PWM        SCL0  COOL
 *    DIRZ          RX2  PWM  7 |               | 18  A4 PWM        SDA0  MIST
 *    STPA          TX2  PWM  8 |               | 17  A3      RX4   SDA1  CYST
 *    DIRA               PWM  9 |               | 16  A2      TX4   SCL1  EHOLD
 *    STEN               PWM 10 |               | 15  A1 PWM  RX3         PRB
 *    SPDI  MOSI0        PWM 11 |               | 14  A0 PWM  TX3         PANIC
 *    SPEN  MISO0        PWM 12 |               | 13 LED PWM  SCK0        SPWM
 *                         3.3V |               | GND
 *    SCL                PWM 24 |               | 41 A17                  KPSTR
 *    SDA                PWM 25 |               | 40 A16                  STENY
 *    STPB  MOSI1            26 |               | 39 A15      MISO1       STENZ
 *    DIRB  SCK1             27 | *  *  *  *  * | 38 A14                  STENA
 *    LIMB          RX7  PWM 28 |               | 37     PWM              STENB
 *    DOOR          TX7  PWM 29 |               | 36     PWM              ST0
 *    ST1                    30 |               | 35          TX8         ST3
 *    AUX0                   31 |    SDCARD     | 34          RX8         ST2
 *    AUX1                   32 |_______________| 33     PWM              AUX2
 */

#ifndef SDCARD_CONNECTION
  #define SDCARD_CONNECTION              ONBOARD
#endif

//
// Servos
//
#define SERVO0_PIN                            24
#define SERVO1_PIN                            25

//
// Limit Switches
//
#define X_STOP_PIN                            20
#define Y_STOP_PIN                            21
#define Z_STOP_PIN                            22

//
// Steppers
//
#define X_STEP_PIN                             2
#define X_DIR_PIN                              3
#define X_ENABLE_PIN                          10
//#define X_CS_PIN                              30

#define Y_STEP_PIN                             4
#define Y_DIR_PIN                              5
#define Y_ENABLE_PIN                          40
//#define Y_CS_PIN                              31

#define Z_STEP_PIN                             6
#define Z_DIR_PIN                              7
#define Z_ENABLE_PIN                          39
//#define Z_CS_PIN                              32

#define E0_STEP_PIN                            8
#define E0_DIR_PIN                             9
#define E0_ENABLE_PIN                         38

#define E1_STEP_PIN                           26
#define E1_DIR_PIN                            27
#define E1_ENABLE_PIN                         37

//
// Heaters / Fans
//
#define HEATER_0_PIN                          31
#define HEATER_1_PIN                          32
#define HEATER_BED_PIN                        33

//
// Temperature Sensors
//
#define TEMP_0_PIN                             5  // Extruder / Analog pin numbering: 2 => A2
#define TEMP_1_PIN                             4
#define TEMP_BED_PIN                          15  // Bed / Analog pin numbering

//
// Misc. Functions
//
#define LED_PIN                               13
#define SOL0_PIN                              17