/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Conditionals_adv.h * Defines that depend on advanced configuration. */ #if EXTRUDERS == 0 #define NO_VOLUMETRICS #undef TEMP_SENSOR_0 #undef TEMP_SENSOR_1 #undef TEMP_SENSOR_2 #undef TEMP_SENSOR_3 #undef TEMP_SENSOR_4 #undef TEMP_SENSOR_5 #undef TEMP_SENSOR_6 #undef TEMP_SENSOR_7 #undef FWRETRACT #undef PIDTEMP #undef AUTOTEMP #undef PID_EXTRUSION_SCALING #undef LIN_ADVANCE #undef FILAMENT_RUNOUT_SENSOR #undef ADVANCED_PAUSE_FEATURE #undef FILAMENT_RUNOUT_DISTANCE_MM #undef FILAMENT_LOAD_UNLOAD_GCODES #undef DISABLE_INACTIVE_EXTRUDER #undef FILAMENT_LOAD_UNLOAD_GCODES #undef EXTRUDER_RUNOUT_PREVENT #undef PREVENT_COLD_EXTRUSION #undef PREVENT_LENGTHY_EXTRUDE #undef THERMAL_PROTECTION_HOTENDS #undef THERMAL_PROTECTION_PERIOD #undef WATCH_TEMP_PERIOD #undef SHOW_TEMP_ADC_VALUES #endif #if !NUM_SERIAL #undef BAUD_RATE_GCODE #endif // Multiple Z steppers #ifndef NUM_Z_STEPPER_DRIVERS #define NUM_Z_STEPPER_DRIVERS 1 #endif #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) #undef Z_STEPPER_ALIGN_AMP #endif #ifndef Z_STEPPER_ALIGN_AMP #define Z_STEPPER_ALIGN_AMP 1.0 #endif #define HAS_CUTTER EITHER(SPINDLE_FEATURE, LASER_FEATURE) #if !defined(__AVR__) || !defined(USBCON) // Define constants and variables for buffering serial data. // Use only 0 or powers of 2 greater than 1 // : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...] #ifndef RX_BUFFER_SIZE #define RX_BUFFER_SIZE 128 #endif // 256 is the max TX buffer limit due to uint8_t head and tail // : [0, 4, 8, 16, 32, 64, 128, 256] #ifndef TX_BUFFER_SIZE #define TX_BUFFER_SIZE 32 #endif #else // SERIAL_XON_XOFF not supported on USB-native devices #undef SERIAL_XON_XOFF #endif #if ENABLED(HOST_ACTION_COMMANDS) #ifndef ACTION_ON_PAUSE #define ACTION_ON_PAUSE "pause" #endif #ifndef ACTION_ON_PAUSED #define ACTION_ON_PAUSED "paused" #endif #ifndef ACTION_ON_RESUME #define ACTION_ON_RESUME "resume" #endif #ifndef ACTION_ON_RESUMED #define ACTION_ON_RESUMED "resumed" #endif #ifndef ACTION_ON_CANCEL #define ACTION_ON_CANCEL "cancel" #endif #ifndef ACTION_ON_KILL #define ACTION_ON_KILL "poweroff" #endif #if HAS_FILAMENT_SENSOR #ifndef ACTION_ON_FILAMENT_RUNOUT #define ACTION_ON_FILAMENT_RUNOUT "filament_runout" #endif #ifndef ACTION_REASON_ON_FILAMENT_RUNOUT #define ACTION_REASON_ON_FILAMENT_RUNOUT "filament_runout" #endif #endif #if ENABLED(G29_RETRY_AND_RECOVER) #ifndef ACTION_ON_G29_RECOVER #define ACTION_ON_G29_RECOVER "probe_rewipe" #endif #ifndef ACTION_ON_G29_FAILURE #define ACTION_ON_G29_FAILURE "probe_failed" #endif #endif #endif #if ENABLED(FYSETC_MINI_12864_2_1) #define LED_CONTROL_MENU #define LED_USER_PRESET_STARTUP #define LED_COLOR_PRESETS #ifndef LED_USER_PRESET_GREEN #define LED_USER_PRESET_GREEN 128 #endif #ifndef LED_USER_PRESET_BLUE #define LED_USER_PRESET_BLUE 0 #endif #ifndef LED_USER_PRESET_BRIGHTNESS #define LED_USER_PRESET_BRIGHTNESS 255 #endif #endif // Set defaults for unspecified LED user colors #if ENABLED(LED_CONTROL_MENU) #ifndef LED_USER_PRESET_RED #define LED_USER_PRESET_RED 255 #endif #ifndef LED_USER_PRESET_GREEN #define LED_USER_PRESET_GREEN 255 #endif #ifndef LED_USER_PRESET_BLUE #define LED_USER_PRESET_BLUE 255 #endif #ifndef LED_USER_PRESET_WHITE #define LED_USER_PRESET_WHITE 0 #endif #ifndef LED_USER_PRESET_BRIGHTNESS #ifdef NEOPIXEL_BRIGHTNESS #define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS #else #define LED_USER_PRESET_BRIGHTNESS 255 #endif #endif #endif // If platform requires early initialization of watchdog to properly boot #define EARLY_WATCHDOG (ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM)) // Extensible UI pin mapping for RepRapDiscount #define TOUCH_UI_ULTIPANEL ENABLED(TOUCH_UI_FTDI_EVE) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP) // Poll-based jogging for joystick and other devices #if ENABLED(JOYSTICK) #define POLL_JOG #endif /** * Driver Timings * NOTE: Driver timing order is longest-to-shortest duration. * Preserve this ordering when adding new drivers. */ #ifndef MINIMUM_STEPPER_POST_DIR_DELAY #if HAS_DRIVER(TB6560) #define MINIMUM_STEPPER_POST_DIR_DELAY 15000 #elif HAS_DRIVER(TB6600) #define MINIMUM_STEPPER_POST_DIR_DELAY 1500 #elif HAS_DRIVER(DRV8825) #define MINIMUM_STEPPER_POST_DIR_DELAY 650 #elif HAS_DRIVER(LV8729) #define MINIMUM_STEPPER_POST_DIR_DELAY 500 #elif HAS_DRIVER(A5984) #define MINIMUM_STEPPER_POST_DIR_DELAY 400 #elif HAS_DRIVER(A4988) #define MINIMUM_STEPPER_POST_DIR_DELAY 200 #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE #define MINIMUM_STEPPER_POST_DIR_DELAY 20 #else #define MINIMUM_STEPPER_POST_DIR_DELAY 0 // Expect at least 10µS since one Stepper ISR must transpire #endif #endif #ifndef MINIMUM_STEPPER_PRE_DIR_DELAY #define MINIMUM_STEPPER_PRE_DIR_DELAY MINIMUM_STEPPER_POST_DIR_DELAY #endif #ifndef MINIMUM_STEPPER_PULSE #if HAS_DRIVER(TB6560) #define MINIMUM_STEPPER_PULSE 30 #elif HAS_DRIVER(TB6600) #define MINIMUM_STEPPER_PULSE 3 #elif HAS_DRIVER(DRV8825) #define MINIMUM_STEPPER_PULSE 2 #elif HAS_DRIVER(A4988) || HAS_DRIVER(A5984) #define MINIMUM_STEPPER_PULSE 1 #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE #define MINIMUM_STEPPER_PULSE 0 #elif HAS_DRIVER(LV8729) #define MINIMUM_STEPPER_PULSE 0 #else #define MINIMUM_STEPPER_PULSE 2 #endif #endif #ifndef MAXIMUM_STEPPER_RATE #if HAS_DRIVER(TB6560) #define MAXIMUM_STEPPER_RATE 15000 #elif HAS_DRIVER(TB6600) #define MAXIMUM_STEPPER_RATE 150000 #elif HAS_DRIVER(DRV8825) #define MAXIMUM_STEPPER_RATE 250000 #elif HAS_DRIVER(A4988) #define MAXIMUM_STEPPER_RATE 500000 #elif HAS_DRIVER(LV8729) #define MAXIMUM_STEPPER_RATE 1000000 #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE #define MAXIMUM_STEPPER_RATE 5000000 #else #define MAXIMUM_STEPPER_RATE 250000 #endif #endif