/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#ifndef __STM32F1__
  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif

#define BOARD_NAME        "FYSETC AIO II"
#define BOARD_WEBSITE_URL "https://fysetc.com"

#define pins_v2_20190128   // geo-f:add for new pins define

// Ignore temp readings during develpment.
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE

//
// Limit Switches
//
#define X_STOP_PIN         PA1
#define Y_STOP_PIN         PA0
#define Z_STOP_PIN         PB14

//
// Filament runout
//
#ifdef pins_v2_20190128
  #define FIL_RUNOUT_PIN   PB15
#else
  #define FIL_RUNOUT_PIN   PB5
#endif

//
// Steppers
//
#define X_STEP_PIN         PB8
#define X_DIR_PIN          PB9
#define X_ENABLE_PIN       PA8

#define Y_STEP_PIN         PB2
#ifdef pins_v2_20190128
  #define Y_DIR_PIN        PB3
#else
  #define Y_DIR_PIN        PB0
#endif
#define Y_ENABLE_PIN       PB1

#define Z_STEP_PIN         PC0
#define Z_DIR_PIN          PC1
#define Z_ENABLE_PIN       PC2

#define E0_STEP_PIN        PC15
#define E0_DIR_PIN         PC14
#define E0_ENABLE_PIN      PC13

//
// Stepper current PWM
//

// X:PA2 Y:PA3 Z:PB12 E:PB13 // changed for test
#define MOTOR_CURRENT_PWM_XY_PIN PA3
#define MOTOR_CURRENT_PWM_Z_PIN  PA2 // PB12
//#define MOTOR_CURRENT_PWM_XY_PIN PB6
//#define MOTOR_CURRENT_PWM_Z_PIN  PB7 // PB12
#define MOTOR_CURRENT_PWM_E_PIN  -1  // PB13
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#ifndef MOTOR_CURRENT_PWM_RANGE
  #define MOTOR_CURRENT_PWM_RANGE 1500 // geo-f:old 2000
#endif
#define DEFAULT_PWM_MOTOR_CURRENT  {500, 500, 400} // geo-f:old 1300 1300 1250

// 采用 SDIO PCB从左到右数
// 1:PC10 - SDIO_D2
// 2:PC11 - SDIO_D3
// 3:PD2 - SDIO_CMD
// 4:VCC
// 5:PC12 - SDIO_CK
// 6:VDD
// 7:PC8 - SDIO_D0
// 8:PC9 - SDIO_D1
// 9:PA15 - SD_DETECT_PIN

//
// Heaters / Fans
//
#define HEATER_0_PIN       PC7
#define HEATER_BED_PIN     PC6
#ifndef FAN_PIN
  #define FAN_PIN          PC8
#endif

//
// Temperature Sensors
//
#define TEMP_BED_PIN       PC5   // Analog Input
#define TEMP_0_PIN         PC4   // Analog Input

//
// Misc. Functions
//
#define SDSS               PA4

//
// LCD Pins
//
#if HAS_SPI_LCD

  #define BEEPER_PIN       PC9

  #if HAS_GRAPHICAL_LCD

    #define DOGLCD_A0      PA15
    #ifdef pins_v2_20190128
      #define DOGLCD_CS    PB5
    #else
      #define DOGLCD_CS    PB7
    #endif

    //#define LCD_CONTRAST 190
    //#define LCD_SCREEN_ROT_90
    //#define LCD_SCREEN_ROT_180
    //#define LCD_SCREEN_ROT_270

  #endif

  // not connected to a pin
  #define SD_DETECT_PIN    PC3

  #if ENABLED(NEWPANEL)
    // The encoder and click button
    #define BTN_EN1        PC10
    #define BTN_EN2        PC11
    #define BTN_ENC        PC12
  #endif

  #ifdef pins_v2_20190128
    #define LCD_RESET_PIN  PB4
    #ifndef RGB_LED_R_PIN
      #define RGB_LED_R_PIN PB0
    #endif
    #ifndef RGB_LED_G_PIN
      #define RGB_LED_G_PIN PB6
    #endif
    #ifndef RGB_LED_B_PIN
      #define RGB_LED_B_PIN PB7
    #endif
  #else
    #define LCD_RESET_PIN  PB6
    #ifndef RGB_LED_R_PIN
      #define RGB_LED_R_PIN PB3
    #endif
    #ifndef RGB_LED_G_PIN
      #define RGB_LED_G_PIN PB4
    #endif
    #ifndef RGB_LED_B_PIN
      #define RGB_LED_B_PIN PB5
    #endif
  #endif

#endif