/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#ifndef __STM32F1__
  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif

#define DEFAULT_MACHINE_NAME "3D Printer"

#define BOARD_NAME "FYSETC CHEETAH"
#define BOARD_WEBSITE_URL "https://fysetc.com"

// Ignore temp readings during develpment.
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE

//
// Servos
//
#define SERVO0_PIN         PA0

//
// Limit Switches
//
#define X_STOP_PIN         PA1
#define Y_STOP_PIN         PB4
#define Z_STOP_PIN         PA15

//
// Filament runout
//
#define FIL_RUNOUT_PIN     PB5

//
// Steppers
//
#define X_STEP_PIN         PB8
#define X_DIR_PIN          PB9
#define X_ENABLE_PIN       PA8

#define Y_STEP_PIN         PB2
#define Y_DIR_PIN          PB3
#define Y_ENABLE_PIN       PB1

#define Z_STEP_PIN         PC0
#define Z_DIR_PIN          PC1
#define Z_ENABLE_PIN       PC2

#define E0_STEP_PIN        PC15
#define E0_DIR_PIN         PC14
#define E0_ENABLE_PIN      PC13

#define X_HARDWARE_SERIAL  MSerial2   // Port correct?
#define Y_HARDWARE_SERIAL  MSerial2
#define Z_HARDWARE_SERIAL  MSerial2
#define E0_HARDWARE_SERIAL MSerial2

//
// Heaters / Fans
//
#define HEATER_0_PIN       PC6
#define HEATER_BED_PIN     PC7
#ifndef FAN_PIN
  #define FAN_PIN          PC8
#endif

//
// Temperature Sensors
//
#define TEMP_BED_PIN       PC5   // Analog Input
#define TEMP_0_PIN         PC4   // Analog Input

//
// Misc. Functions
//
#define SDSS               PA4

//
// LCD Pins
//
#if HAS_SPI_LCD

  #define BEEPER_PIN       PC9

  #if HAS_GRAPHICAL_LCD
    #define DOGLCD_A0      PB14
    #define DOGLCD_CS      PB12
    #define DOGLCD_SCK     PB13
    #define DOGLCD_MOSI    PB15
    //#define LCD_SCREEN_ROT_90
    //#define LCD_SCREEN_ROT_180
    //#define LCD_SCREEN_ROT_270

    #if ENABLED(FYSETC_MINI_12864) || ENABLED(U8GLIB_ST7920)
      #define FORCE_SOFT_SPI
    #endif
  #endif

  #define LCD_PINS_RS      PB12   // CS -- SOFT SPI for ENDER3 LCD
  #define LCD_PINS_D4      PB13   // SCLK
  #define LCD_PINS_ENABLE  PB15   // DATA MOSI

  // not connected to a pin
  #define SD_DETECT_PIN    PC3

  #ifndef RGB_LED_R_PIN
    #define RGB_LED_R_PIN  PB0
  #endif
  #ifndef RGB_LED_G_PIN
    #define RGB_LED_G_PIN  PB7
  #endif
  #ifndef RGB_LED_B_PIN
    #define RGB_LED_B_PIN  PB6
  #endif

  //#define LCD_CONTRAST   190

  #if ENABLED(NEWPANEL)
    #define BTN_EN1        PC11
    #define BTN_EN2        PC10
    #define BTN_ENC        PC12
  #endif

#endif