/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments * * Applies to the following boards: * * RAMPS_14_EFB (Hotend, Fan, Bed) * RAMPS_14_EEB (Hotend0, Hotend1, Bed) * RAMPS_14_EFF (Hotend, Fan0, Fan1) * RAMPS_14_EEF (Hotend0, Hotend1, Fan) * RAMPS_14_SF (Spindle, Controller Fan) * * RAMPS_13_EFB (Hotend, Fan, Bed) * RAMPS_13_EEB (Hotend0, Hotend1, Bed) * RAMPS_13_EFF (Hotend, Fan0, Fan1) * RAMPS_13_EEF (Hotend0, Hotend1, Fan) * RAMPS_13_SF (Spindle, Controller Fan) * * Other pins_MYBOARD.h files may override these defaults * * Differences between * RAMPS_13 | RAMPS_14 * 7 | 11 */ #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "RAMPS 1.4" #endif #ifndef DEFAULT_MACHINE_NAME #define DEFAULT_MACHINE_NAME "SimRap 1.4" #endif #ifndef MARLIN_EEPROM_SIZE #define MARLIN_EEPROM_SIZE 0x1000 // 4K #endif // // Servos // #ifdef IS_RAMPS_13 #define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI #else #define SERVO0_PIN 11 #endif #define SERVO1_PIN 6 #define SERVO2_PIN 5 #ifndef SERVO3_PIN #define SERVO3_PIN 4 #endif // // Limit Switches // #define X_MIN_PIN 3 #ifndef X_MAX_PIN #define X_MAX_PIN 2 #endif #define Y_MIN_PIN 14 #define Y_MAX_PIN 15 #define Z_MIN_PIN 18 #define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // #define X_STEP_PIN 54 #define X_DIR_PIN 55 #define X_ENABLE_PIN 38 #ifndef X_CS_PIN #define X_CS_PIN 53 #endif #define Y_STEP_PIN 60 #define Y_DIR_PIN 61 #define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN #define Y_CS_PIN 49 #endif #define Z_STEP_PIN 46 #define Z_DIR_PIN 48 #define Z_ENABLE_PIN 62 #ifndef Z_CS_PIN #define Z_CS_PIN 40 #endif #define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif #define E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif // // Temperature Sensors // #define TEMP_0_PIN 0 // Analog Input #define TEMP_1_PIN 1 // Analog Input #define TEMP_BED_PIN 2 // Analog Input // SPI for MAX Thermocouple #if DISABLED(SDSUPPORT) #define TEMP_0_CS_PIN 66 // Don't use 53 if using Display/SD card #else #define TEMP_0_CS_PIN 66 // Don't use 49 (SD_DETECT_PIN) #endif // // Heaters / Fans // #ifndef MOSFET_A_PIN #define MOSFET_A_PIN 10 #endif #ifndef MOSFET_B_PIN #define MOSFET_B_PIN 9 #endif #ifndef MOSFET_C_PIN #define MOSFET_C_PIN 8 #endif #ifndef MOSFET_D_PIN #define MOSFET_D_PIN -1 #endif #define HEATER_0_PIN MOSFET_A_PIN #if FET_ORDER_EFB // Hotend, Fan, Bed #define FAN_PIN MOSFET_B_PIN #define HEATER_BED_PIN MOSFET_C_PIN #elif FET_ORDER_EEF // Hotend, Hotend, Fan #define HEATER_1_PIN MOSFET_B_PIN #define FAN_PIN MOSFET_C_PIN #elif FET_ORDER_EEB // Hotend, Hotend, Bed #define HEATER_1_PIN MOSFET_B_PIN #define HEATER_BED_PIN MOSFET_C_PIN #elif FET_ORDER_EFF // Hotend, Fan, Fan #define FAN_PIN MOSFET_B_PIN #define FAN1_PIN MOSFET_C_PIN #elif FET_ORDER_SF // Spindle, Fan #define FAN_PIN MOSFET_C_PIN #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") #define FAN_PIN MOSFET_B_PIN #define HEATER_BED_PIN MOSFET_C_PIN #if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #define FAN1_PIN MOSFET_D_PIN #else #define HEATER_1_PIN MOSFET_D_PIN #endif #endif #ifndef FAN_PIN #define FAN_PIN 4 // IO pin. Buffer needed #endif // // Misc. Functions // #define SDSS 53 #define LED_PIN 13 #define NEOPIXEL_PIN 71 #ifndef FILWIDTH_PIN #define FILWIDTH_PIN 5 // Analog Input on AUX2 #endif // define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector #ifndef FIL_RUNOUT_PIN #define FIL_RUNOUT_PIN 21 #endif #ifndef PS_ON_PIN #define PS_ON_PIN 12 #endif #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) #if NUM_SERVOS <= 1 // Prefer the servo connector #define CASE_LIGHT_PIN 6 // Hardware PWM #elif HAS_FREE_AUX2_PINS // try to use AUX 2 #define CASE_LIGHT_PIN 44 // Hardware PWM #endif #endif // // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM #define SPINDLE_DIR_PIN 5 #elif HAS_FREE_AUX2_PINS // try to use AUX 2 #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM #define SPINDLE_DIR_PIN 65 #endif #endif // // Průša i3 MK2 Multiplexer Support // #if HAS_PRUSA_MMU1 #ifndef E_MUX0_PIN #define E_MUX0_PIN 40 // Z_CS_PIN #endif #ifndef E_MUX1_PIN #define E_MUX1_PIN 42 // E0_CS_PIN #endif #ifndef E_MUX2_PIN #define E_MUX2_PIN 44 // E1_CS_PIN #endif #endif /** * Default pins for TMC software SPI */ #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI #define TMC_SW_MOSI 66 #endif #ifndef TMC_SW_MISO #define TMC_SW_MISO 44 #endif #ifndef TMC_SW_SCK #define TMC_SW_SCK 64 #endif #endif #if HAS_TMC_UART /** * TMC2208/TMC2209 stepper drivers * * Hardware serial communication ports. * If undefined software serial is used according to the pins below */ //#define X_HARDWARE_SERIAL Serial1 //#define X2_HARDWARE_SERIAL Serial1 //#define Y_HARDWARE_SERIAL Serial1 //#define Y2_HARDWARE_SERIAL Serial1 //#define Z_HARDWARE_SERIAL Serial1 //#define Z2_HARDWARE_SERIAL Serial1 //#define E0_HARDWARE_SERIAL Serial1 //#define E1_HARDWARE_SERIAL Serial1 //#define E2_HARDWARE_SERIAL Serial1 //#define E3_HARDWARE_SERIAL Serial1 //#define E4_HARDWARE_SERIAL Serial1 /** * Software serial */ #ifndef X_SERIAL_TX_PIN #define X_SERIAL_TX_PIN 40 #endif #ifndef X_SERIAL_RX_PIN #define X_SERIAL_RX_PIN 63 #endif #ifndef X2_SERIAL_TX_PIN #define X2_SERIAL_TX_PIN -1 #endif #ifndef X2_SERIAL_RX_PIN #define X2_SERIAL_RX_PIN -1 #endif #ifndef Y_SERIAL_TX_PIN #define Y_SERIAL_TX_PIN 59 #endif #ifndef Y_SERIAL_RX_PIN #define Y_SERIAL_RX_PIN 64 #endif #ifndef Y2_SERIAL_TX_PIN #define Y2_SERIAL_TX_PIN -1 #endif #ifndef Y2_SERIAL_RX_PIN #define Y2_SERIAL_RX_PIN -1 #endif #ifndef Z_SERIAL_TX_PIN #define Z_SERIAL_TX_PIN 42 #endif #ifndef Z_SERIAL_RX_PIN #define Z_SERIAL_RX_PIN 65 #endif #ifndef Z2_SERIAL_TX_PIN #define Z2_SERIAL_TX_PIN -1 #endif #ifndef Z2_SERIAL_RX_PIN #define Z2_SERIAL_RX_PIN -1 #endif #ifndef E0_SERIAL_TX_PIN #define E0_SERIAL_TX_PIN 44 #endif #ifndef E0_SERIAL_RX_PIN #define E0_SERIAL_RX_PIN 66 #endif #ifndef E1_SERIAL_TX_PIN #define E1_SERIAL_TX_PIN -1 #endif #ifndef E1_SERIAL_RX_PIN #define E1_SERIAL_RX_PIN -1 #endif #ifndef E2_SERIAL_TX_PIN #define E2_SERIAL_TX_PIN -1 #endif #ifndef E2_SERIAL_RX_PIN #define E2_SERIAL_RX_PIN -1 #endif #ifndef E3_SERIAL_TX_PIN #define E3_SERIAL_TX_PIN -1 #endif #ifndef E3_SERIAL_RX_PIN #define E3_SERIAL_RX_PIN -1 #endif #ifndef E4_SERIAL_TX_PIN #define E4_SERIAL_TX_PIN -1 #endif #ifndef E4_SERIAL_RX_PIN #define E4_SERIAL_RX_PIN -1 #endif #ifndef E5_SERIAL_TX_PIN #define E5_SERIAL_TX_PIN -1 #endif #ifndef E5_SERIAL_RX_PIN #define E5_SERIAL_RX_PIN -1 #endif #ifndef E6_SERIAL_TX_PIN #define E6_SERIAL_TX_PIN -1 #endif #ifndef E6_SERIAL_RX_PIN #define E6_SERIAL_RX_PIN -1 #endif #ifndef E7_SERIAL_TX_PIN #define E7_SERIAL_TX_PIN -1 #endif #ifndef E7_SERIAL_RX_PIN #define E7_SERIAL_RX_PIN -1 #endif #endif ////////////////////////// // LCDs and Controllers // ////////////////////////// #if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI) #define TFT_A0_PIN 43 #define TFT_CS_PIN 49 #define TFT_DC_PIN 43 #define TFT_SCK_PIN SD_SCK_PIN #define TFT_MOSI_PIN SD_MOSI_PIN #define TFT_MISO_PIN SD_MISO_PIN #define LCD_USE_DMA_SPI #define BTN_EN1 40 #define BTN_EN2 63 #define BTN_ENC 59 #define BEEPER_PIN 42 #define TOUCH_CS_PIN 33 #define SD_DETECT_PIN 41 #define HAS_SPI_FLASH 1 #if HAS_SPI_FLASH #define SPI_DEVICE 1 #define SPI_FLASH_SIZE 0x1000000 // 16MB #define SPI_FLASH_CS_PIN 31 #define SPI_FLASH_MOSI_PIN SD_MOSI_PIN #define SPI_FLASH_MISO_PIN SD_MISO_PIN #define SPI_FLASH_SCK_PIN SD_SCK_PIN #endif #define TFT_BUFFER_SIZE 0xFFFF #ifndef TFT_DRIVER #define TFT_DRIVER ST7796 #endif #ifndef TOUCH_SCREEN_CALIBRATION #if ENABLED(TFT_RES_320x240) #ifndef TOUCH_CALIBRATION_X #define TOUCH_CALIBRATION_X 20525 #endif #ifndef TOUCH_CALIBRATION_Y #define TOUCH_CALIBRATION_Y 15335 #endif #ifndef TOUCH_OFFSET_X #define TOUCH_OFFSET_X -1 #endif #ifndef TOUCH_OFFSET_Y #define TOUCH_OFFSET_Y 0 #endif #elif ENABLED(TFT_RES_480x272) #ifndef TOUCH_CALIBRATION_X #define TOUCH_CALIBRATION_X 30715 #endif #ifndef TOUCH_CALIBRATION_Y #define TOUCH_CALIBRATION_Y 17415 #endif #ifndef TOUCH_OFFSET_X #define TOUCH_OFFSET_X 0 #endif #ifndef TOUCH_OFFSET_Y #define TOUCH_OFFSET_Y -1 #endif #elif ENABLED(TFT_RES_480x320) #ifndef TOUCH_CALIBRATION_X #define TOUCH_CALIBRATION_X 30595 #endif #ifndef TOUCH_CALIBRATION_Y #define TOUCH_CALIBRATION_Y 20415 #endif #ifndef TOUCH_OFFSET_X #define TOUCH_OFFSET_X 2 #endif #ifndef TOUCH_OFFSET_Y #define TOUCH_OFFSET_Y 1 #endif #elif ENABLED(TFT_RES_1024x600) #ifndef TOUCH_CALIBRATION_X #define TOUCH_CALIBRATION_X 65533 #endif #ifndef TOUCH_CALIBRATION_Y #define TOUCH_CALIBRATION_Y 38399 #endif #ifndef TOUCH_OFFSET_X #define TOUCH_OFFSET_X 2 #endif #ifndef TOUCH_OFFSET_Y #define TOUCH_OFFSET_Y 1 #endif #endif #endif #define BTN_BACK 70 #elif HAS_WIRED_LCD // // LCD Display output pins // #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 42 #define LCD_PINS_D4 65 #define LCD_PINS_D5 66 #define LCD_PINS_D6 44 #define LCD_PINS_D7 64 #else #if ENABLED(CR10_STOCKDISPLAY) #define LCD_PINS_RS 27 #define LCD_PINS_ENABLE 29 #define LCD_PINS_D4 25 #if !IS_NEWPANEL #define BEEPER_PIN 37 #endif #elif ENABLED(ZONESTAR_LCD) #define LCD_PINS_RS 64 #define LCD_PINS_ENABLE 44 #define LCD_PINS_D4 63 #define LCD_PINS_D5 40 #define LCD_PINS_D6 42 #define LCD_PINS_D7 65 #else #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) #define LCD_PINS_DC 25 // Set as output on init #define LCD_PINS_RS 27 // Pull low for 1s to init // DOGM SPI LCD Support #define DOGLCD_CS 16 #define DOGLCD_MOSI 17 #define DOGLCD_SCK 23 #define DOGLCD_A0 LCD_PINS_DC #else #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 #define LCD_PINS_D4 23 #define LCD_PINS_D5 25 #define LCD_PINS_D6 27 #endif #define LCD_PINS_D7 29 #if !IS_NEWPANEL #define BEEPER_PIN 33 #endif #endif #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK_PIN 38 //#define SHIFT_LD_PIN 42 //#define SHIFT_OUT_PIN 40 //#define SHIFT_EN_PIN 17 #endif #endif // // LCD Display input pins // #if IS_NEWPANEL #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #define BEEPER_PIN 37 #if ENABLED(CR10_STOCKDISPLAY) #define BTN_EN1 17 #define BTN_EN2 23 #else #define BTN_EN1 31 #define BTN_EN2 33 #endif #define BTN_ENC 35 #define SD_DETECT_PIN 49 #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) #define LCD_BACKLIGHT_PIN 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define BTN_EN1 64 #define BTN_EN2 59 #define BTN_ENC 63 #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) #define BTN_EN1 47 #define BTN_EN2 43 #define BTN_ENC 32 #define LCD_SDSS SDSS #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) #define BTN_EN1 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_ENC -1 #define LCD_SDSS SDSS #define SD_DETECT_PIN 49 #elif EITHER(VIKI2, miniVIKI) #define DOGLCD_CS 45 #define DOGLCD_A0 44 #define BEEPER_PIN 33 #define STAT_LED_RED_PIN 32 #define STAT_LED_BLUE_PIN 35 #define BTN_EN1 22 #define BTN_EN2 7 #define BTN_ENC 39 #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define KILL_PIN 31 #define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #define DOGLCD_CS 29 #define DOGLCD_A0 27 #define BEEPER_PIN 23 #define LCD_BACKLIGHT_PIN 33 #define BTN_EN1 35 #define BTN_EN2 37 #define BTN_ENC 31 #define LCD_SDSS SDSS #define SD_DETECT_PIN 49 #define KILL_PIN 41 #elif ENABLED(MKS_MINI_12864) #define DOGLCD_A0 27 #define DOGLCD_CS 25 #define BEEPER_PIN 37 // not connected to a pin #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define BTN_EN1 31 #define BTN_EN2 33 #define BTN_ENC 35 #define SD_DETECT_PIN 49 #define KILL_PIN 64 //#define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270 #elif ENABLED(MINIPANEL) #define BEEPER_PIN 42 // not connected to a pin #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define DOGLCD_A0 44 #define DOGLCD_CS 66 #define BTN_EN1 40 #define BTN_EN2 63 #define BTN_ENC 59 #define SD_DETECT_PIN 49 #define KILL_PIN 64 //#define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270 #elif ENABLED(ZONESTAR_LCD) #define ADC_KEYPAD_PIN 12 #elif ENABLED(AZSMZ_12864) // Pins only defined for RAMPS_SMART currently #else // Beeper on AUX-4 #define BEEPER_PIN 33 // Buttons are directly attached to AUX-2 #if IS_RRW_KEYPAD #define SHIFT_OUT_PIN 40 #define SHIFT_CLK_PIN 44 #define SHIFT_LD_PIN 42 #define BTN_EN1 64 #define BTN_EN2 59 #define BTN_ENC 63 #elif ENABLED(PANEL_ONE) #define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN2 63 // AUX2 PIN 4 #define BTN_ENC 49 // AUX3 PIN 7 #else #define BTN_EN1 37 #define BTN_EN2 35 #define BTN_ENC 31 #define SD_DETECT_PIN 41 #endif #if ENABLED(G3D_PANEL) #define SD_DETECT_PIN 49 #define KILL_PIN 41 #endif #endif // CUSTOM SIMULATOR INPUTS #define BTN_BACK 70 #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD