My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123
  1. #!/usr/bin/env bash
  2. #
  3. # Build tests for Teensy 3.5/3.6 (ARM Cortex-M4)
  4. #
  5. # exit on first failure
  6. set -e
  7. restore_configs
  8. opt_set MOTHERBOARD BOARD_TEENSY35_36
  9. exec_test $1 $2 "Teensy3.5 with default config"
  10. #
  11. # Test as many features together as possible
  12. #
  13. restore_configs
  14. opt_set MOTHERBOARD BOARD_TEENSY35_36
  15. opt_set EXTRUDERS 2
  16. opt_set TEMP_SENSOR_0 1
  17. opt_set TEMP_SENSOR_1 5
  18. opt_set TEMP_SENSOR_BED 1
  19. opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
  20. FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \
  21. FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
  22. BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
  23. PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \
  24. ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \
  25. PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
  26. HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
  27. opt_set I2C_SLAVE_ADDRESS 63
  28. opt_set GRID_MAX_POINTS_X 16
  29. exec_test $1 $2 "Teensy3.5 with many features"
  30. #
  31. # Test a Sled Z Probe with Linear leveling
  32. #
  33. restore_configs
  34. opt_set MOTHERBOARD BOARD_TEENSY35_36
  35. opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
  36. exec_test $1 $2 "Sled Z Probe with Linear leveling"
  37. #
  38. # Test a Servo Probe
  39. #
  40. # restore_configs
  41. # opt_set MOTHERBOARD BOARD_TEENSY35_36
  42. # opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
  43. # AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
  44. # opt_set NUM_SERVOS 1
  45. # exec_test $1 $2 "Servo Probe"
  46. #
  47. # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
  48. #
  49. # opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS \
  50. # EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
  51. # exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
  52. #
  53. # Test MAGNETIC_PARKING_EXTRUDER with LCD
  54. #
  55. restore_configs
  56. opt_set MOTHERBOARD BOARD_TEENSY35_36
  57. opt_set EXTRUDERS 2
  58. opt_set TEMP_SENSOR_1 1
  59. opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER
  60. exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD"
  61. #
  62. # Mixing Extruder
  63. #
  64. restore_configs
  65. opt_set MOTHERBOARD BOARD_TEENSY35_36
  66. opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  67. opt_set MIXING_STEPPERS 2
  68. exec_test $1 $2 "Mixing Extruder"
  69. #
  70. # Test SWITCHING_EXTRUDER
  71. #
  72. # restore_configs
  73. # opt_set MOTHERBOARD BOARD_TEENSY35_36
  74. # opt_set EXTRUDERS 2
  75. # opt_set NUM_SERVOS 1
  76. # opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
  77. # exec_test $1 $2 "SWITCHING_EXTRUDER"
  78. #
  79. # Enable COREXY
  80. #
  81. restore_configs
  82. opt_set MOTHERBOARD BOARD_TEENSY35_36
  83. opt_enable COREXY
  84. opt_set X_DRIVER_TYPE TMC5160
  85. opt_set Y_DRIVER_TYPE TMC5160
  86. opt_set X_MIN_ENDSTOP_INVERTING true
  87. opt_set Y_MIN_ENDSTOP_INVERTING true
  88. opt_add X_CS_PIN 46
  89. opt_add Y_CS_PIN 47
  90. opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
  91. exec_test $1 $2 "Teensy 3.5/3.6 COREXY"
  92. #
  93. # Enable COREXZ
  94. #
  95. restore_configs
  96. opt_set MOTHERBOARD BOARD_TEENSY35_36
  97. opt_enable COREXZ
  98. exec_test $1 $2 "Teensy 3.5/3.6 COREXZ"
  99. #
  100. # Enable Dual Z with Dual Z endstops
  101. #
  102. restore_configs
  103. opt_set MOTHERBOARD BOARD_TEENSY35_36
  104. opt_enable Z_MULTI_ENDSTOPS
  105. opt_set NUM_Z_STEPPER_DRIVERS 2
  106. pins_set ramps/RAMPS X_MAX_PIN -1
  107. opt_add Z2_MAX_PIN 2
  108. opt_enable USE_XMAX_PLUG
  109. exec_test $1 $2 "Dual Z with Dual Z endstops"
  110. # Clean up
  111. restore_configs