My Marlin configs for Fabrikator Mini and CTC i3 Pro B
選択できるのは25トピックまでです。 トピックは、先頭が英数字で、英数字とダッシュ('-')を使用した35文字以内のものにしてください。

teensy41-tests 3.7KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124
  1. #!/usr/bin/env bash
  2. #
  3. # Build tests for Teensy 4.0/4.1 (ARM Cortex-M7)
  4. #
  5. # exit on first failure
  6. set -e
  7. restore_configs
  8. opt_set MOTHERBOARD BOARD_TEENSY41
  9. exec_test $1 $2 "Teensy4.1 with default config"
  10. #
  11. # Test as many features together as possible
  12. #
  13. restore_configs
  14. opt_set MOTHERBOARD BOARD_TEENSY41
  15. opt_set EXTRUDERS 2
  16. opt_set TEMP_SENSOR_0 1
  17. opt_set TEMP_SENSOR_1 5
  18. opt_set TEMP_SENSOR_BED 1
  19. opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
  20. FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \
  21. FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
  22. BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET \
  23. PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
  24. ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \
  25. PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
  26. HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
  27. opt_add EXTUI_EXAMPLE
  28. opt_set I2C_SLAVE_ADDRESS 63
  29. opt_set GRID_MAX_POINTS_X 16
  30. exec_test $1 $2 "Teensy4.1 with many features"
  31. #
  32. # Test a Sled Z Probe with Linear leveling
  33. #
  34. restore_configs
  35. opt_set MOTHERBOARD BOARD_TEENSY41
  36. opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
  37. exec_test $1 $2 "Sled Z Probe with Linear leveling"
  38. #
  39. # Test a Servo Probe
  40. #
  41. # restore_configs
  42. # opt_set MOTHERBOARD BOARD_TEENSY41
  43. # opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
  44. # AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
  45. # opt_set NUM_SERVOS 1
  46. # exec_test $1 $2 "Servo Probe"
  47. #
  48. # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
  49. #
  50. # opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS \
  51. # EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
  52. # exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
  53. #
  54. # Test MAGNETIC_PARKING_EXTRUDER with LCD
  55. #
  56. restore_configs
  57. opt_set MOTHERBOARD BOARD_TEENSY41
  58. opt_set EXTRUDERS 2
  59. opt_set TEMP_SENSOR_1 1
  60. opt_enable MAGNETIC_PARKING_EXTRUDER
  61. exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD"
  62. #
  63. # Mixing Extruder
  64. #
  65. restore_configs
  66. opt_set MOTHERBOARD BOARD_TEENSY41
  67. opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL
  68. opt_set MIXING_STEPPERS 2
  69. exec_test $1 $2 "Mixing Extruder"
  70. #
  71. # Test SWITCHING_EXTRUDER
  72. #
  73. # restore_configs
  74. # opt_set MOTHERBOARD BOARD_TEENSY41
  75. # opt_set EXTRUDERS 2
  76. # opt_set NUM_SERVOS 1
  77. # opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
  78. # exec_test $1 $2 "SWITCHING_EXTRUDER"
  79. #
  80. # Enable COREXY
  81. #
  82. restore_configs
  83. opt_set MOTHERBOARD BOARD_TEENSY41
  84. opt_enable COREXY
  85. opt_set X_DRIVER_TYPE TMC5160
  86. opt_set Y_DRIVER_TYPE TMC5160
  87. opt_set X_MIN_ENDSTOP_INVERTING true
  88. opt_set Y_MIN_ENDSTOP_INVERTING true
  89. opt_add X_CS_PIN 46
  90. opt_add Y_CS_PIN 47
  91. opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
  92. exec_test $1 $2 "Teensy 4.0/4.1 COREXY"
  93. #
  94. # Enable COREXZ
  95. #
  96. restore_configs
  97. opt_set MOTHERBOARD BOARD_TEENSY41
  98. opt_enable COREXZ
  99. exec_test $1 $2 "Teensy 4.0/4.1 COREXZ"
  100. #
  101. # Enable Dual Z with Dual Z endstops
  102. #
  103. restore_configs
  104. opt_set MOTHERBOARD BOARD_TEENSY41
  105. opt_enable Z_MULTI_ENDSTOPS
  106. opt_set NUM_Z_STEPPER_DRIVERS 2
  107. pins_set ramps/RAMPS X_MAX_PIN -1
  108. opt_add Z2_MAX_PIN 2
  109. opt_enable USE_XMAX_PLUG
  110. exec_test $1 $2 "Dual Z with Dual Z endstops"
  111. # Clean up
  112. restore_configs