marlin/Marlin/src/pins/stm32/pins_STM3R_MINI.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

#if !defined(__STM32F1__) && !defined(__STM32F4__)
  #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
#endif

/**
 * 21017 Victor Perez Marlin for stm32f1 test
 */

#define BOARD_INFO_NAME      "STM3R Mini"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME

// Enable I2C_EEPROM for testing
#define I2C_EEPROM

// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000

//
// Limit Switches
//
#define X_STOP_PIN         PD0
#define Y_STOP_PIN         PD1
#define Z_STOP_PIN         PD4

//
// Steppers
//
#define X_STEP_PIN         PE1
#define X_DIR_PIN          PE0
#define X_ENABLE_PIN       PC0

#define Y_STEP_PIN         PE3
#define Y_DIR_PIN          PE2
#define Y_ENABLE_PIN       PC1

#define Z_STEP_PIN         PE5
#define Z_DIR_PIN          PE4
#define Z_ENABLE_PIN       PC2

#define E0_STEP_PIN        PE7
#define E0_DIR_PIN         PE6
#define E0_ENABLE_PIN      PC3

#define E1_STEP_PIN        PE9
#define E1_DIR_PIN         PE8
#define E1_ENABLE_PIN      PC4

#define E2_STEP_PIN        PE11
#define E2_DIR_PIN         PE10
#define E2_ENABLE_PIN      PC5

//
// Misc. Functions
//
#define SDSS               PA15
#define LED_PIN            PB2

//
// Heaters / Fans
//
#define HEATER_0_PIN       PD12   // EXTRUDER 1
//#define HEATER_1_PIN       PD13

#define HEATER_BED_PIN     PB9   // BED
//#define HEATER_BED2_PIN    -1   // BED2
//#define HEATER_BED3_PIN    -1   // BED3

#ifndef FAN_PIN
  #define FAN_PIN          PD14
#endif
#define FAN1_PIN           PD13

#define FAN_SOFT_PWM

//
// Temperature Sensors
//
#define TEMP_BED_PIN       PA0
#define TEMP_0_PIN         PA1
#define TEMP_1_PIN         PA2
#define TEMP_2_PIN         PA3

// Laser control
#if HAS_CUTTER
  #define SPINDLE_LASER_PWM_PIN     PB8
  #define SPINDLE_LASER_ENA_PIN     PD5
#endif

//
// LCD Pins
//
#if HAS_SPI_LCD

  #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
    #define LCD_PINS_RS    49   // CS chip select /SS chip slave select
    #define LCD_PINS_ENABLE 51  // SID (MOSI)
    #define LCD_PINS_D4    52   // SCK (CLK) clock
  #elif BOTH(NEWPANEL, PANEL_ONE)
    #define LCD_PINS_RS    PB8
    #define LCD_PINS_ENABLE PD2
    #define LCD_PINS_D4    PB12
    #define LCD_PINS_D5    PB13
    #define LCD_PINS_D6    PB14
    #define LCD_PINS_D7    PB15
  #else
    #define LCD_PINS_RS    PB8
    #define LCD_PINS_ENABLE PD2
    #define LCD_PINS_D4    PB12
    #define LCD_PINS_D5    PB13
    #define LCD_PINS_D6    PB14
    #define LCD_PINS_D7    PB15
    #if DISABLED(NEWPANEL)
      #define BEEPER_PIN   33
      // Buttons attached to a shift register
      // Not wired yet
      //#define SHIFT_CLK  38
      //#define SHIFT_LD   42
      //#define SHIFT_OUT  40
      //#define SHIFT_EN   17
    #endif
  #endif

  #if ENABLED(TOUCH_BUTTONS)

    #define TOUCH_CS_PIN   PB12   // SPI2_NSS
    #define TOUCH_SCK_PIN  PB13
    #define TOUCH_MOSI_PIN PB14
    #define TOUCH_MISO_PIN PB15
    #define TOUCH_INT_PIN  PC6   // (PenIRQ coming from ADS7843)

  #elif ENABLED(NEWPANEL)

    #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)

      #define BEEPER_PIN        37

      #define BTN_EN1           31
      #define BTN_EN2           33
      #define BTN_ENC           35

      #define SD_DETECT_PIN     49
      #define KILL_PIN          41

      #if ENABLED(BQ_LCD_SMART_CONTROLLER)
        #define LCD_BACKLIGHT_PIN 39
      #endif

    #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)

      #define BTN_EN1      64
      #define BTN_EN2      59
      #define BTN_ENC      63
      #define SD_DETECT_PIN 42

    #elif ENABLED(LCD_I2C_PANELOLU2)

      #define BTN_EN1      47
      #define BTN_EN2      43
      #define BTN_ENC      32
      #define LCD_SDSS     53
      #define SD_DETECT_PIN -1
      #define KILL_PIN     41

    #elif ENABLED(LCD_I2C_VIKI)

      #define BTN_EN1      22   // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
      #define BTN_EN2       7   // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.

      #define BTN_ENC      -1
      #define LCD_SDSS     53
      #define SD_DETECT_PIN 49

    #elif ANY(VIKI2, miniVIKI)

      #define BEEPER_PIN   33

      // Pins for DOGM SPI LCD Support
      #define DOGLCD_A0    44
      #define DOGLCD_CS    45
      #define LCD_SCREEN_ROT_180

      #define BTN_EN1      22
      #define BTN_EN2       7
      #define BTN_ENC      39

      #define SDSS         53
      #define SD_DETECT_PIN -1   // Pin 49 for display sd interface, 72 for easy adapter board

      #define KILL_PIN     31

      #define STAT_LED_RED_PIN  32
      #define STAT_LED_BLUE_PIN 35

    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)

      #define BTN_EN1      35
      #define BTN_EN2      37
      #define BTN_ENC      31
      #define SD_DETECT_PIN 49
      #define LCD_SDSS     53
      #define KILL_PIN     41
      #define BEEPER_PIN   23
      #define DOGLCD_CS    29
      #define DOGLCD_A0    27
      #define LCD_BACKLIGHT_PIN 33

    #elif ENABLED(MINIPANEL)

      #define BEEPER_PIN   42
      // Pins for DOGM SPI LCD Support
      #define DOGLCD_A0    44
      #define DOGLCD_CS    66
      #define LCD_BACKLIGHT_PIN 65   // backlight LED on A11/D65
      #define SDSS         53

      #define KILL_PIN     64
      // GLCD features
      // Uncomment screen orientation
      //#define LCD_SCREEN_ROT_90
      //#define LCD_SCREEN_ROT_180
      //#define LCD_SCREEN_ROT_270
      // The encoder and click button
      #define BTN_EN1      40
      #define BTN_EN2      63
      #define BTN_ENC      59
      // not connected to a pin
      #define SD_DETECT_PIN 49

    #else

      // Beeper on AUX-4
      #define BEEPER_PIN   33

      // Buttons directly attached to AUX-2
      #if ENABLED(REPRAPWORLD_KEYPAD)
        #define BTN_EN1    64
        #define BTN_EN2    59
        #define BTN_ENC    63
        #define SHIFT_OUT  40
        #define SHIFT_CLK  44
        #define SHIFT_LD   42
      #elif ENABLED(PANEL_ONE)
        #define BTN_EN1    59   // AUX2 PIN 3
        #define BTN_EN2    63   // AUX2 PIN 4
        #define BTN_ENC    49   // AUX3 PIN 7
      #else
        #define BTN_EN1    37
        #define BTN_EN2    35
        #define BTN_ENC    31
      #endif

      #if ENABLED(G3D_PANEL)
        #define SD_DETECT_PIN 49
        #define KILL_PIN   41
      #else
        //#define SD_DETECT_PIN -1   // Ramps doesn't use this
      #endif

    #endif
  #endif // NEWPANEL

#endif // HAS_SPI_LCD