My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

pins_CHEAPTRONIC.h 2.3KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Cheaptronic v1.0 pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Cheaptronic v1.0"
  29. #define LARGE_FLASH true
  30. //
  31. // Limit Switches
  32. //
  33. #define X_STOP_PIN 3
  34. #define Y_STOP_PIN 2
  35. #define Z_STOP_PIN 5
  36. //
  37. // Steppers
  38. //
  39. #define X_STEP_PIN 14
  40. #define X_DIR_PIN 15
  41. #define X_ENABLE_PIN 24
  42. #define Y_STEP_PIN 35
  43. #define Y_DIR_PIN 36
  44. #define Y_ENABLE_PIN 31
  45. #define Z_STEP_PIN 40
  46. #define Z_DIR_PIN 41
  47. #define Z_ENABLE_PIN 37
  48. #define E0_STEP_PIN 26
  49. #define E0_DIR_PIN 28
  50. #define E0_ENABLE_PIN 25
  51. #define E1_STEP_PIN 33
  52. #define E1_DIR_PIN 34
  53. #define E1_ENABLE_PIN 30
  54. //
  55. // Temperature sensors
  56. //
  57. #define TEMP_0_PIN 15 // Analog Input
  58. #define TEMP_1_PIN 14 // Analog Input
  59. #define TEMP_BED_PIN 13 // Analog Input
  60. //
  61. // Heaters / Fans
  62. //
  63. #define HEATER_0_PIN 19 // EXTRUDER 1
  64. #define HEATER_1_PIN 23 // EXTRUDER 2
  65. #define HEATER_BED_PIN 22
  66. // Cheaptronic v1.0 doesn't support LCD
  67. #define LCD_PINS_RS -1
  68. #define LCD_PINS_ENABLE -1
  69. #define LCD_PINS_D4 -1
  70. #define LCD_PINS_D5 -1
  71. #define LCD_PINS_D6 -1
  72. #define LCD_PINS_D7 -1
  73. // Cheaptronic v1.0 doesn't support keypad
  74. #define BTN_EN1 -1
  75. #define BTN_EN2 -1
  76. #define BTN_ENC -1