123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #if !defined(STM32F4) && !defined(STM32F4xx)
- #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
- #elif HOTENDS > 6 || E_STEPPERS > 6
- #error "FLYF407ZG supports up to 6 hotends / E-steppers."
- #endif
-
- #define BOARD_INFO_NAME "FLYF407ZG"
- #define BOARD_WEBSITE_URL "github.com/FLYmaker/FLYF407ZG"
- #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
-
- #undef E2END
- #define E2END 0xFFF // 4KB
-
- //
- // Servos
- //
- #define SERVO0_PIN PE11
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN PC3
- #define X_MAX_PIN PC2
- #define Y_MIN_PIN PF2
- #define Y_MAX_PIN PF1
- #define Z_MIN_PIN PF0
- #define Z_MAX_PIN PC15
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- #define Z_MIN_PROBE_PIN PC14 // Z3_PIN
-
- //
- // Steppers
- //
-
- #define X_STEP_PIN PB9
- #define X_DIR_PIN PE0
- #define X_ENABLE_PIN PE1
- #ifndef X_CS_PIN
- #define X_CS_PIN PG13
- #endif
-
- #define Y_STEP_PIN PB8
- #define Y_DIR_PIN PG11
- #define Y_ENABLE_PIN PG12
- #ifndef Y_CS_PIN
- #define Y_CS_PIN PG10
- #endif
-
- #define Z_STEP_PIN PA8
- #define Z_DIR_PIN PD6
- #define Z_ENABLE_PIN PD7
- #ifndef Z_CS_PIN
- #define Z_CS_PIN PD5
- #endif
-
- #define E0_STEP_PIN PC7
- #define E0_DIR_PIN PD3
- #define E0_ENABLE_PIN PD4
- #ifndef E0_CS_PIN
- #define E0_CS_PIN PD1
- #endif
-
- #define E1_STEP_PIN PC6
- #define E1_DIR_PIN PA15
- #define E1_ENABLE_PIN PD0
- #ifndef E1_CS_PIN
- #define E1_CS_PIN PA14
- #endif
-
- #define E2_STEP_PIN PD15
- #define E2_DIR_PIN PG7
- #define E2_ENABLE_PIN PG8
- #ifndef E2_CS_PIN
- #define E2_CS_PIN PG6
- #endif
-
- #define E3_STEP_PIN PD14
- #define E3_DIR_PIN PG4
- #define E3_ENABLE_PIN PG5
- #ifndef E3_CS_PIN
- #define E3_CS_PIN PG3
- #endif
-
- #define E4_STEP_PIN PD13
- #define E4_DIR_PIN PD11
- #define E4_ENABLE_PIN PG2
- #ifndef E4_CS_PIN
- #define E4_CS_PIN PD10
- #endif
-
- #define E5_STEP_PIN PD12
- #define E5_DIR_PIN PD8
- #define E5_ENABLE_PIN PD9
- #ifndef E5_CS_PIN
- #define E5_CS_PIN PB12
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PA0 // Analog Input
- #define TEMP_1_PIN PC1 // Analog Input
- #define TEMP_2_PIN PC0 // Analog Input
- #define TEMP_3_PIN PF10 // Analog Input
- #define TEMP_4_PIN PF5 // Analog Input
- #define TEMP_5_PIN PF4 // Analog Input
- #define TEMP_BED_PIN PF3 // Analog Input
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PF7
- #define HEATER_1_PIN PF6
- #define HEATER_2_PIN PE6
- #define HEATER_3_PIN PE5
- #define HEATER_4_PIN PE4
- #define HEATER_5_PIN PA2
- #define HEATER_BED_PIN PE2
-
- #ifndef FAN_PIN
- #define FAN_PIN PF8
- #endif
- #define FAN1_PIN PF9
- #define FAN2_PIN PE3
- #define FAN3_PIN PA1
- #define FAN4_PIN PE13
- #define FAN5_PIN PB11
-
- //
- // Onboard SD support
- //
-
- #define SDIO_D0_PIN PC8
- #define SDIO_D1_PIN PC9
- //#define SD_CARD_DETECT_PIN PC13
- #define SDIO_D2_PIN PC10
- #define SDIO_D3_PIN PC11
- #define SDIO_CK_PIN PC12
- #define SDIO_CMD_PIN PD2
-
- #if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD
- #define SDIO_SUPPORT // Use SDIO for onboard SD
-
- #ifndef SDIO_SUPPORT
- #define SOFTWARE_SPI // Use soft SPI for onboard SD
- #define SDSS SDIO_D3_PIN
- #define SCK_PIN SDIO_CK_PIN
- #define MISO_PIN SDIO_D0_PIN
- #define MOSI_PIN SDIO_CMD_PIN
- #endif
- #endif
-
- //
- // Trinamic Software SPI
- //
-
- #if ENABLED(TMC_USE_SW_SPI)
- #ifndef TMC_SW_MOSI
- #define TMC_SW_MOSI PB15
- #endif
- #ifndef TMC_SW_MISO
- #define TMC_SW_MISO PB14
- #endif
- #ifndef TMC_SW_SCK
- #define TMC_SW_SCK PB13
- #endif
- #endif
-
- //
- // Trinamic Software Serial
- //
-
- #if HAS_TMC220x
- #define X_SERIAL_TX_PIN PG13
- #define X_SERIAL_RX_PIN PG13
-
- #define Y_SERIAL_TX_PIN PG10
- #define Y_SERIAL_RX_PIN PG10
-
- #define Z_SERIAL_TX_PIN PD5
- #define Z_SERIAL_RX_PIN PD5
-
- #define E0_SERIAL_TX_PIN PD1
- #define E0_SERIAL_RX_PIN PD1
-
- #define E1_SERIAL_TX_PIN PA14
- #define E1_SERIAL_RX_PIN PA14
-
- #define E2_SERIAL_TX_PIN PG6
- #define E2_SERIAL_RX_PIN PG6
-
- #define E3_SERIAL_TX_PIN PG3
- #define E3_SERIAL_RX_PIN PG3
-
- #define E4_SERIAL_TX_PIN PD10
- #define E4_SERIAL_RX_PIN PD10
-
- #define E5_SERIAL_TX_PIN PB12
- #define E5_SERIAL_RX_PIN PB12
-
- #endif
-
-
- //
- // LCD / Controller
- //
- #define SCK_PIN PB13
- #define MISO_PIN PB14
- #define MOSI_PIN PB15
- #define SDSS PF11
- #define SD_DETECT_PIN PB2
- #define BEEPER_PIN PB10
- #define LCD_PINS_RS PE12
- #define LCD_PINS_ENABLE PE14
- #define LCD_PINS_D4 PE10
- #define LCD_PINS_D5 PE9
- #define LCD_PINS_D6 PE8
- #define LCD_PINS_D7 PE7
- #define BTN_EN1 PC4
- #define BTN_EN2 PC5
- #define BTN_ENC PE15
-
- //
- // Filament runout
- //
-
- #define FIL_RUNOUT_PIN PA3
-
- //
- // ST7920 Delays
- //
- #ifndef ST7920_DELAY_1
- #define ST7920_DELAY_1 DELAY_NS(96)
- #endif
- #ifndef ST7920_DELAY_2
- #define ST7920_DELAY_2 DELAY_NS(48)
- #endif
- #ifndef ST7920_DELAY_3
- #define ST7920_DELAY_3 DELAY_NS(715)
- #endif
|