My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.

Configuration_adv.h 142KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352235323542355235623572358235923602361236223632364236523662367236823692370237123722373237423752376237723782379238023812382238323842385238623872388238923902391239223932394239523962397239823992400240124022403240424052406240724082409241024112412241324142415241624172418241924202421242224232424242524262427242824292430243124322433243424352436243724382439244024412442244324442445244624472448244924502451245224532454245524562457245824592460246124622463246424652466246724682469247024712472247324742475247624772478247924802481248224832484248524862487248824892490249124922493249424952496249724982499250025012502250325042505250625072508250925102511251225132514251525162517251825192520252125222523252425252526252725282529253025312532253325342535253625372538253925402541254225432544254525462547254825492550255125522553255425552556255725582559256025612562256325642565256625672568256925702571257225732574257525762577257825792580258125822583258425852586258725882589259025912592259325942595259625972598259926002601260226032604260526062607260826092610261126122613261426152616261726182619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726482649265026512652265326542655265626572658265926602661266226632664266526662667266826692670267126722673267426752676267726782679268026812682268326842685268626872688268926902691269226932694269526962697269826992700270127022703270427052706270727082709271027112712271327142715271627172718271927202721272227232724272527262727272827292730273127322733273427352736273727382739274027412742274327442745274627472748274927502751275227532754275527562757275827592760276127622763276427652766276727682769277027712772277327742775277627772778277927802781278227832784278527862787278827892790279127922793279427952796279727982799280028012802280328042805280628072808280928102811281228132814281528162817281828192820282128222823282428252826282728282829283028312832283328342835283628372838283928402841284228432844284528462847284828492850285128522853285428552856285728582859286028612862286328642865286628672868286928702871287228732874287528762877287828792880288128822883288428852886288728882889289028912892289328942895289628972898289929002901290229032904290529062907290829092910291129122913291429152916291729182919292029212922292329242925292629272928292929302931293229332934293529362937293829392940294129422943294429452946294729482949295029512952295329542955295629572958295929602961296229632964296529662967296829692970297129722973297429752976297729782979298029812982298329842985298629872988298929902991299229932994299529962997299829993000300130023003300430053006300730083009301030113012301330143015301630173018301930203021302230233024302530263027302830293030303130323033303430353036303730383039304030413042304330443045304630473048304930503051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084308530863087308830893090309130923093309430953096309730983099310031013102310331043105310631073108310931103111311231133114311531163117311831193120312131223123312431253126312731283129313031313132313331343135313631373138313931403141314231433144314531463147314831493150315131523153315431553156315731583159316031613162316331643165316631673168316931703171317231733174317531763177317831793180318131823183318431853186318731883189319031913192319331943195319631973198319932003201320232033204320532063207320832093210321132123213321432153216321732183219322032213222322332243225322632273228322932303231323232333234323532363237323832393240324132423243324432453246324732483249325032513252325332543255325632573258325932603261326232633264326532663267326832693270327132723273327432753276327732783279328032813282328332843285328632873288328932903291329232933294329532963297329832993300330133023303330433053306330733083309331033113312331333143315331633173318331933203321332233233324332533263327332833293330333133323333333433353336333733383339334033413342334333443345334633473348334933503351335233533354335533563357335833593360336133623363336433653366336733683369337033713372337333743375337633773378337933803381338233833384338533863387338833893390339133923393339433953396339733983399340034013402340334043405340634073408340934103411341234133414341534163417341834193420342134223423342434253426342734283429343034313432343334343435343634373438343934403441344234433444344534463447344834493450345134523453345434553456345734583459346034613462346334643465346634673468346934703471347234733474347534763477347834793480348134823483348434853486348734883489349034913492349334943495349634973498349935003501350235033504350535063507350835093510351135123513351435153516351735183519352035213522352335243525352635273528352935303531353235333534353535363537353835393540354135423543354435453546354735483549355035513552355335543555355635573558355935603561356235633564356535663567356835693570357135723573357435753576357735783579358035813582358335843585358635873588358935903591
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <https://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23. /**
  24. * Configuration_adv.h
  25. *
  26. * Advanced settings.
  27. * Only change these if you know exactly what you're doing.
  28. * Some of these settings can damage your printer if improperly set!
  29. *
  30. * Basic settings can be found in Configuration.h
  31. */
  32. #define CONFIGURATION_ADV_H_VERSION 020007
  33. //===========================================================================
  34. //============================= Thermal Settings ============================
  35. //===========================================================================
  36. // @section temperature
  37. /**
  38. * Thermocouple sensors are quite sensitive to noise. Any noise induced in
  39. * the sensor wires, such as by stepper motor wires run in parallel to them,
  40. * may result in the thermocouple sensor reporting spurious errors. This
  41. * value is the number of errors which can occur in a row before the error
  42. * is reported. This allows us to ignore intermittent error conditions while
  43. * still detecting an actual failure, which should result in a continuous
  44. * stream of errors from the sensor.
  45. *
  46. * Set this value to 0 to fail on the first error to occur.
  47. */
  48. #define THERMOCOUPLE_MAX_ERRORS 15
  49. //
  50. // Custom Thermistor 1000 parameters
  51. //
  52. #if TEMP_SENSOR_0 == 1000
  53. #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  54. #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  55. #define HOTEND0_BETA 3950 // Beta value
  56. #endif
  57. #if TEMP_SENSOR_1 == 1000
  58. #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  59. #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  60. #define HOTEND1_BETA 3950 // Beta value
  61. #endif
  62. #if TEMP_SENSOR_2 == 1000
  63. #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  64. #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  65. #define HOTEND2_BETA 3950 // Beta value
  66. #endif
  67. #if TEMP_SENSOR_3 == 1000
  68. #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  69. #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  70. #define HOTEND3_BETA 3950 // Beta value
  71. #endif
  72. #if TEMP_SENSOR_4 == 1000
  73. #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  74. #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  75. #define HOTEND4_BETA 3950 // Beta value
  76. #endif
  77. #if TEMP_SENSOR_5 == 1000
  78. #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  79. #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  80. #define HOTEND5_BETA 3950 // Beta value
  81. #endif
  82. #if TEMP_SENSOR_6 == 1000
  83. #define HOTEND6_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  84. #define HOTEND6_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  85. #define HOTEND6_BETA 3950 // Beta value
  86. #endif
  87. #if TEMP_SENSOR_7 == 1000
  88. #define HOTEND7_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  89. #define HOTEND7_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  90. #define HOTEND7_BETA 3950 // Beta value
  91. #endif
  92. #if TEMP_SENSOR_BED == 1000
  93. #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  94. #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  95. #define BED_BETA 3950 // Beta value
  96. #endif
  97. #if TEMP_SENSOR_CHAMBER == 1000
  98. #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  99. #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  100. #define CHAMBER_BETA 3950 // Beta value
  101. #endif
  102. //
  103. // Hephestos 2 24V heated bed upgrade kit.
  104. // https://store.bq.com/en/heated-bed-kit-hephestos2
  105. //
  106. //#define HEPHESTOS2_HEATED_BED_KIT
  107. #if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
  108. #undef TEMP_SENSOR_BED
  109. #define TEMP_SENSOR_BED 70
  110. #define HEATER_BED_INVERTING true
  111. #endif
  112. //
  113. // Heated Bed Bang-Bang options
  114. //
  115. #if DISABLED(PIDTEMPBED)
  116. #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
  117. #if ENABLED(BED_LIMIT_SWITCHING)
  118. #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  119. #endif
  120. #endif
  121. //
  122. // Heated Chamber options
  123. //
  124. #if TEMP_SENSOR_CHAMBER
  125. #define CHAMBER_MINTEMP 5
  126. #define CHAMBER_MAXTEMP 60
  127. #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
  128. //#define CHAMBER_LIMIT_SWITCHING
  129. //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
  130. //#define HEATER_CHAMBER_INVERTING false
  131. //#define CHAMBER_FAN // Enable a fan on the chamber
  132. #if ENABLED(CHAMBER_FAN)
  133. #define CHAMBER_FAN_MODE 2 // Fan control mode: 0=Static; 1=Linear increase when temp is higher than target; 2=V-shaped curve.
  134. #if CHAMBER_FAN_MODE == 0
  135. #define CHAMBER_FAN_BASE 255 // Chamber fan PWM (0-255)
  136. #elif CHAMBER_FAN_MODE == 1
  137. #define CHAMBER_FAN_BASE 128 // Base chamber fan PWM (0-255); turns on when chamber temperature is above the target
  138. #define CHAMBER_FAN_FACTOR 25 // PWM increase per °C above target
  139. #elif CHAMBER_FAN_MODE == 2
  140. #define CHAMBER_FAN_BASE 128 // Minimum chamber fan PWM (0-255)
  141. #define CHAMBER_FAN_FACTOR 25 // PWM increase per °C difference from target
  142. #endif
  143. #endif
  144. //#define CHAMBER_VENT // Enable a servo-controlled vent on the chamber
  145. #if ENABLED(CHAMBER_VENT)
  146. #define CHAMBER_VENT_SERVO_NR 1 // Index of the vent servo
  147. #define HIGH_EXCESS_HEAT_LIMIT 5 // How much above target temp to consider there is excess heat in the chamber
  148. #define LOW_EXCESS_HEAT_LIMIT 3
  149. #define MIN_COOLING_SLOPE_TIME_CHAMBER_VENT 20
  150. #define MIN_COOLING_SLOPE_DEG_CHAMBER_VENT 1.5
  151. #endif
  152. #endif
  153. /**
  154. * Thermal Protection provides additional protection to your printer from damage
  155. * and fire. Marlin always includes safe min and max temperature ranges which
  156. * protect against a broken or disconnected thermistor wire.
  157. *
  158. * The issue: If a thermistor falls out, it will report the much lower
  159. * temperature of the air in the room, and the the firmware will keep
  160. * the heater on.
  161. *
  162. * The solution: Once the temperature reaches the target, start observing.
  163. * If the temperature stays too far below the target (hysteresis) for too
  164. * long (period), the firmware will halt the machine as a safety precaution.
  165. *
  166. * If you get false positives for "Thermal Runaway", increase
  167. * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  168. */
  169. #if ENABLED(THERMAL_PROTECTION_HOTENDS)
  170. #define THERMAL_PROTECTION_PERIOD 40 // Seconds
  171. #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
  172. //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
  173. #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
  174. //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
  175. #endif
  176. /**
  177. * Whenever an M104, M109, or M303 increases the target temperature, the
  178. * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
  179. * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
  180. * requires a hard reset. This test restarts with any M104/M109/M303, but only
  181. * if the current temperature is far enough below the target for a reliable
  182. * test.
  183. *
  184. * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
  185. * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
  186. * below 2.
  187. */
  188. #define WATCH_TEMP_PERIOD 20 // Seconds
  189. #define WATCH_TEMP_INCREASE 2 // Degrees Celsius
  190. #endif
  191. /**
  192. * Thermal Protection parameters for the bed are just as above for hotends.
  193. */
  194. #if ENABLED(THERMAL_PROTECTION_BED)
  195. #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
  196. #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
  197. /**
  198. * As described above, except for the bed (M140/M190/M303).
  199. */
  200. #define WATCH_BED_TEMP_PERIOD 60 // Seconds
  201. #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
  202. #endif
  203. /**
  204. * Thermal Protection parameters for the heated chamber.
  205. */
  206. #if ENABLED(THERMAL_PROTECTION_CHAMBER)
  207. #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds
  208. #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius
  209. /**
  210. * Heated chamber watch settings (M141/M191).
  211. */
  212. #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds
  213. #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
  214. #endif
  215. #if ENABLED(PIDTEMP)
  216. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
  217. // A well-chosen Kc value should add just enough power to melt the increased material volume.
  218. //#define PID_EXTRUSION_SCALING
  219. #if ENABLED(PID_EXTRUSION_SCALING)
  220. #define DEFAULT_Kc (100) // heating power = Kc * e_speed
  221. #define LPQ_MAX_LEN 50
  222. #endif
  223. /**
  224. * Add an experimental additional term to the heater power, proportional to the fan speed.
  225. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
  226. * You can either just add a constant compensation with the DEFAULT_Kf value
  227. * or follow the instruction below to get speed-dependent compensation.
  228. *
  229. * Constant compensation (use only with fanspeeds of 0% and 100%)
  230. * ---------------------------------------------------------------------
  231. * A good starting point for the Kf-value comes from the calculation:
  232. * kf = (power_fan * eff_fan) / power_heater * 255
  233. * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater.
  234. *
  235. * Example:
  236. * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8
  237. * Kf = (2.4W * 0.8) / 40W * 255 = 12.24
  238. *
  239. * Fan-speed dependent compensation
  240. * --------------------------------
  241. * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%).
  242. * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled.
  243. * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature
  244. * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big.
  245. * 2. Note the Kf-value for fan-speed at 100%
  246. * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving.
  247. * 4. Repeat step 1. and 2. for this fan speed.
  248. * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in
  249. * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED
  250. */
  251. //#define PID_FAN_SCALING
  252. #if ENABLED(PID_FAN_SCALING)
  253. //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION
  254. #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION)
  255. // The alternative definition is used for an easier configuration.
  256. // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED.
  257. // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly.
  258. #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf
  259. #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf
  260. #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING
  261. #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED)
  262. #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0
  263. #else
  264. #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed)
  265. #define DEFAULT_Kf 10 // A constant value added to the PID-tuner
  266. #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING
  267. #endif
  268. #endif
  269. #endif
  270. /**
  271. * Automatic Temperature Mode
  272. *
  273. * Dynamically adjust the hotend target temperature based on planned E moves.
  274. *
  275. * (Contrast with PID_EXTRUSION_SCALING, which tracks E movement and adjusts PID
  276. * behavior using an additional kC value.)
  277. *
  278. * Autotemp is calculated by (mintemp + factor * mm_per_sec), capped to maxtemp.
  279. *
  280. * Enable Autotemp Mode with M104/M109 F<factor> S<mintemp> B<maxtemp>.
  281. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL).
  282. */
  283. #define AUTOTEMP
  284. #if ENABLED(AUTOTEMP)
  285. #define AUTOTEMP_OLDWEIGHT 0.98
  286. // Turn on AUTOTEMP on M104/M109 by default using proportions set here
  287. //#define AUTOTEMP_PROPORTIONAL
  288. #if ENABLED(AUTOTEMP_PROPORTIONAL)
  289. #define AUTOTEMP_MIN_P 0 // (°C) Added to the target temperature
  290. #define AUTOTEMP_MAX_P 5 // (°C) Added to the target temperature
  291. #define AUTOTEMP_FACTOR_P 1 // Apply this F parameter by default (overridden by M104/M109 F)
  292. #endif
  293. #endif
  294. // Show Temperature ADC value
  295. // Enable for M105 to include ADC values read from temperature sensors.
  296. //#define SHOW_TEMP_ADC_VALUES
  297. /**
  298. * High Temperature Thermistor Support
  299. *
  300. * Thermistors able to support high temperature tend to have a hard time getting
  301. * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP
  302. * will probably be caught when the heating element first turns on during the
  303. * preheating process, which will trigger a min_temp_error as a safety measure
  304. * and force stop everything.
  305. * To circumvent this limitation, we allow for a preheat time (during which,
  306. * min_temp_error won't be triggered) and add a min_temp buffer to handle
  307. * aberrant readings.
  308. *
  309. * If you want to enable this feature for your hotend thermistor(s)
  310. * uncomment and set values > 0 in the constants below
  311. */
  312. // The number of consecutive low temperature errors that can occur
  313. // before a min_temp_error is triggered. (Shouldn't be more than 10.)
  314. //#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
  315. // The number of milliseconds a hotend will preheat before starting to check
  316. // the temperature. This value should NOT be set to the time it takes the
  317. // hot end to reach the target temperature, but the time it takes to reach
  318. // the minimum temperature your thermistor can read. The lower the better/safer.
  319. // This shouldn't need to be more than 30 seconds (30000)
  320. //#define MILLISECONDS_PREHEAT_TIME 0
  321. // @section extruder
  322. // Extruder runout prevention.
  323. // If the machine is idle and the temperature over MINTEMP
  324. // then extrude some filament every couple of SECONDS.
  325. //#define EXTRUDER_RUNOUT_PREVENT
  326. #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
  327. #define EXTRUDER_RUNOUT_MINTEMP 190
  328. #define EXTRUDER_RUNOUT_SECONDS 30
  329. #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/min)
  330. #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
  331. #endif
  332. /**
  333. * Hotend Idle Timeout
  334. * Prevent filament in the nozzle from charring and causing a critical jam.
  335. */
  336. //#define HOTEND_IDLE_TIMEOUT
  337. #if ENABLED(HOTEND_IDLE_TIMEOUT)
  338. #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection
  339. #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection
  340. #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout
  341. #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout
  342. #endif
  343. // @section temperature
  344. // Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
  345. // The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
  346. #define TEMP_SENSOR_AD595_OFFSET 0.0
  347. #define TEMP_SENSOR_AD595_GAIN 1.0
  348. #define TEMP_SENSOR_AD8495_OFFSET 0.0
  349. #define TEMP_SENSOR_AD8495_GAIN 1.0
  350. /**
  351. * Controller Fan
  352. * To cool down the stepper drivers and MOSFETs.
  353. *
  354. * The fan turns on automatically whenever any driver is enabled and turns
  355. * off (or reduces to idle speed) shortly after drivers are turned off.
  356. */
  357. //#define USE_CONTROLLER_FAN
  358. #if ENABLED(USE_CONTROLLER_FAN)
  359. //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
  360. //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
  361. //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
  362. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
  363. #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
  364. #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
  365. #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
  366. //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
  367. #if ENABLED(CONTROLLER_FAN_EDITABLE)
  368. #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu
  369. #endif
  370. #endif
  371. // When first starting the main fan, run it at full speed for the
  372. // given number of milliseconds. This gets the fan spinning reliably
  373. // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
  374. //#define FAN_KICKSTART_TIME 100
  375. // Some coolers may require a non-zero "off" state.
  376. //#define FAN_OFF_PWM 1
  377. /**
  378. * PWM Fan Scaling
  379. *
  380. * Define the min/max speeds for PWM fans (as set with M106).
  381. *
  382. * With these options the M106 0-255 value range is scaled to a subset
  383. * to ensure that the fan has enough power to spin, or to run lower
  384. * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
  385. * Value 0 always turns off the fan.
  386. *
  387. * Define one or both of these to override the default 0-255 range.
  388. */
  389. //#define FAN_MIN_PWM 50
  390. //#define FAN_MAX_PWM 128
  391. /**
  392. * FAST PWM FAN Settings
  393. *
  394. * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
  395. * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
  396. * frequency as close as possible to the desired frequency.
  397. *
  398. * FAST_PWM_FAN_FREQUENCY [undefined by default]
  399. * Set this to your desired frequency.
  400. * If left undefined this defaults to F = F_CPU/(2*255*1)
  401. * i.e., F = 31.4kHz on 16MHz microcontrollers or F = 39.2kHz on 20MHz microcontrollers.
  402. * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
  403. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
  404. *
  405. * USE_OCR2A_AS_TOP [undefined by default]
  406. * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
  407. * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
  408. * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
  409. * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
  410. * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
  411. * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
  412. */
  413. #if ENABLED(FAST_PWM_FAN)
  414. //#define FAST_PWM_FAN_FREQUENCY 31400
  415. //#define USE_OCR2A_AS_TOP
  416. #endif
  417. // @section extruder
  418. /**
  419. * Extruder cooling fans
  420. *
  421. * Extruder auto fans automatically turn on when their extruders'
  422. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
  423. *
  424. * Your board's pins file specifies the recommended pins. Override those here
  425. * or set to -1 to disable completely.
  426. *
  427. * Multiple extruders can be assigned to the same pin in which case
  428. * the fan will turn on when any selected extruder is above the threshold.
  429. */
  430. #define E0_AUTO_FAN_PIN -1
  431. #define E1_AUTO_FAN_PIN -1
  432. #define E2_AUTO_FAN_PIN -1
  433. #define E3_AUTO_FAN_PIN -1
  434. #define E4_AUTO_FAN_PIN -1
  435. #define E5_AUTO_FAN_PIN -1
  436. #define E6_AUTO_FAN_PIN -1
  437. #define E7_AUTO_FAN_PIN -1
  438. #define CHAMBER_AUTO_FAN_PIN -1
  439. #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
  440. #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
  441. #define CHAMBER_AUTO_FAN_TEMPERATURE 30
  442. #define CHAMBER_AUTO_FAN_SPEED 255
  443. /**
  444. * Part-Cooling Fan Multiplexer
  445. *
  446. * This feature allows you to digitally multiplex the fan output.
  447. * The multiplexer is automatically switched at tool-change.
  448. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
  449. */
  450. #define FANMUX0_PIN -1
  451. #define FANMUX1_PIN -1
  452. #define FANMUX2_PIN -1
  453. /**
  454. * M355 Case Light on-off / brightness
  455. */
  456. //#define CASE_LIGHT_ENABLE
  457. #if ENABLED(CASE_LIGHT_ENABLE)
  458. //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
  459. #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
  460. #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
  461. #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
  462. //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm
  463. //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
  464. //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
  465. //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light, requires NEOPIXEL_LED.
  466. #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
  467. #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
  468. #endif
  469. #endif
  470. // @section homing
  471. // If you want endstops to stay on (by default) even when not homing
  472. // enable this option. Override at any time with M120, M121.
  473. //#define ENDSTOPS_ALWAYS_ON_DEFAULT
  474. // @section extras
  475. //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
  476. // Employ an external closed loop controller. Override pins here if needed.
  477. //#define EXTERNAL_CLOSED_LOOP_CONTROLLER
  478. #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
  479. //#define CLOSED_LOOP_ENABLE_PIN -1
  480. //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1
  481. #endif
  482. /**
  483. * Dual Steppers / Dual Endstops
  484. *
  485. * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes.
  486. *
  487. * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to
  488. * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop
  489. * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug
  490. * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'.
  491. *
  492. * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors
  493. * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error
  494. * in X2. Dual endstop offsets can be set at runtime with 'M666 X<offset> Y<offset> Z<offset>'.
  495. */
  496. //#define X_DUAL_STEPPER_DRIVERS
  497. #if ENABLED(X_DUAL_STEPPER_DRIVERS)
  498. #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions
  499. //#define X_DUAL_ENDSTOPS
  500. #if ENABLED(X_DUAL_ENDSTOPS)
  501. #define X2_USE_ENDSTOP _XMAX_
  502. #define X2_ENDSTOP_ADJUSTMENT 0
  503. #endif
  504. #endif
  505. //#define Y_DUAL_STEPPER_DRIVERS
  506. #if ENABLED(Y_DUAL_STEPPER_DRIVERS)
  507. #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions
  508. //#define Y_DUAL_ENDSTOPS
  509. #if ENABLED(Y_DUAL_ENDSTOPS)
  510. #define Y2_USE_ENDSTOP _YMAX_
  511. #define Y2_ENDSTOP_ADJUSTMENT 0
  512. #endif
  513. #endif
  514. //
  515. // For Z set the number of stepper drivers
  516. //
  517. #define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many
  518. #if NUM_Z_STEPPER_DRIVERS > 1
  519. //#define Z_MULTI_ENDSTOPS
  520. #if ENABLED(Z_MULTI_ENDSTOPS)
  521. #define Z2_USE_ENDSTOP _XMAX_
  522. #define Z2_ENDSTOP_ADJUSTMENT 0
  523. #if NUM_Z_STEPPER_DRIVERS >= 3
  524. #define Z3_USE_ENDSTOP _YMAX_
  525. #define Z3_ENDSTOP_ADJUSTMENT 0
  526. #endif
  527. #if NUM_Z_STEPPER_DRIVERS >= 4
  528. #define Z4_USE_ENDSTOP _ZMAX_
  529. #define Z4_ENDSTOP_ADJUSTMENT 0
  530. #endif
  531. #endif
  532. #endif
  533. /**
  534. * Dual X Carriage
  535. *
  536. * This setup has two X carriages that can move independently, each with its own hotend.
  537. * The carriages can be used to print an object with two colors or materials, or in
  538. * "duplication mode" it can print two identical or X-mirrored objects simultaneously.
  539. * The inactive carriage is parked automatically to prevent oozing.
  540. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
  541. * By default the X2 stepper is assigned to the first unused E plug on the board.
  542. *
  543. * The following Dual X Carriage modes can be selected with M605 S<mode>:
  544. *
  545. * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
  546. * results as long as it supports dual X-carriages. (M605 S0)
  547. *
  548. * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
  549. * that additional slicer support is not required. (M605 S1)
  550. *
  551. * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
  552. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
  553. * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
  554. * follow with M605 S2 to initiate duplicated movement.
  555. *
  556. * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
  557. * the movement of the first except the second extruder is reversed in the X axis.
  558. * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
  559. * follow with M605 S3 to initiate mirrored movement.
  560. */
  561. //#define DUAL_X_CARRIAGE
  562. #if ENABLED(DUAL_X_CARRIAGE)
  563. #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS
  564. #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage
  565. #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage
  566. #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed
  567. #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position
  568. #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS.
  569. // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
  570. // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
  571. // without modifying the firmware (through the "M218 T1 X???" command).
  572. // Remember: you should set the second extruder x-offset to 0 in your slicer.
  573. // This is the default power-up mode which can be later using M605.
  574. #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
  575. // Default x offset in duplication mode (typically set to half print bed width)
  576. #define DEFAULT_DUPLICATION_X_OFFSET 100
  577. #endif
  578. // Activate a solenoid on the active extruder with M380. Disable all with M381.
  579. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
  580. //#define EXT_SOLENOID
  581. // @section homing
  582. /**
  583. * Homing Procedure
  584. * Homing (G28) does an indefinite move towards the endstops to establish
  585. * the position of the toolhead relative to the workspace.
  586. */
  587. //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing
  588. #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump
  589. #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
  590. //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing
  591. //#define QUICK_HOME // If G28 contains XY do a diagonal move first
  592. //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
  593. //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first
  594. // @section bltouch
  595. #if ENABLED(BLTOUCH)
  596. /**
  597. * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
  598. * Do not activate settings that the probe might not understand. Clones might misunderstand
  599. * advanced commands.
  600. *
  601. * Note: If the probe is not deploying, do a "Reset" and "Self-Test" and then check the
  602. * wiring of the BROWN, RED and ORANGE wires.
  603. *
  604. * Note: If the trigger signal of your probe is not being recognized, it has been very often
  605. * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
  606. * like they would be with a real switch. So please check the wiring first.
  607. *
  608. * Settings for all BLTouch and clone probes:
  609. */
  610. // Safety: The probe needs time to recognize the command.
  611. // Minimum command delay (ms). Enable and increase if needed.
  612. //#define BLTOUCH_DELAY 500
  613. /**
  614. * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
  615. */
  616. // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
  617. // in special cases, like noisy or filtered input configurations.
  618. //#define BLTOUCH_FORCE_SW_MODE
  619. /**
  620. * Settings for BLTouch Smart 3.0 and 3.1
  621. * Summary:
  622. * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
  623. * - High-Speed mode
  624. * - Disable LCD voltage options
  625. */
  626. /**
  627. * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
  628. * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
  629. * If disabled, OD mode is the hard-coded default on 3.0
  630. * On startup, Marlin will compare its eeprom to this value. If the selected mode
  631. * differs, a mode set eeprom write will be completed at initialization.
  632. * Use the option below to force an eeprom write to a V3.1 probe regardless.
  633. */
  634. //#define BLTOUCH_SET_5V_MODE
  635. /**
  636. * Safety: Activate if connecting a probe with an unknown voltage mode.
  637. * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
  638. * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
  639. * To preserve the life of the probe, use this once then turn it off and re-flash.
  640. */
  641. //#define BLTOUCH_FORCE_MODE_SET
  642. /**
  643. * Use "HIGH SPEED" mode for probing.
  644. * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
  645. * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
  646. * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
  647. */
  648. //#define BLTOUCH_HS_MODE
  649. // Safety: Enable voltage mode settings in the LCD menu.
  650. //#define BLTOUCH_LCD_VOLTAGE_MENU
  651. #endif // BLTOUCH
  652. // @section extras
  653. /**
  654. * Z Steppers Auto-Alignment
  655. * Add the G34 command to align multiple Z steppers using a bed probe.
  656. */
  657. //#define Z_STEPPER_AUTO_ALIGN
  658. #if ENABLED(Z_STEPPER_AUTO_ALIGN)
  659. // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
  660. // If not defined, probe limits will be used.
  661. // Override with 'M422 S<index> X<pos> Y<pos>'
  662. //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } }
  663. /**
  664. * Orientation for the automatically-calculated probe positions.
  665. * Override Z stepper align points with 'M422 S<index> X<pos> Y<pos>'
  666. *
  667. * 2 Steppers: (0) (1)
  668. * | | 2 |
  669. * | 1 2 | |
  670. * | | 1 |
  671. *
  672. * 3 Steppers: (0) (1) (2) (3)
  673. * | 3 | 1 | 2 1 | 2 |
  674. * | | 3 | | 3 |
  675. * | 1 2 | 2 | 3 | 1 |
  676. *
  677. * 4 Steppers: (0) (1) (2) (3)
  678. * | 4 3 | 1 4 | 2 1 | 3 2 |
  679. * | | | | |
  680. * | 1 2 | 2 3 | 3 4 | 4 1 |
  681. */
  682. #ifndef Z_STEPPER_ALIGN_XY
  683. //#define Z_STEPPERS_ORIENTATION 0
  684. #endif
  685. // Provide Z stepper positions for more rapid convergence in bed alignment.
  686. // Requires triple stepper drivers (i.e., set NUM_Z_STEPPER_DRIVERS to 3)
  687. //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
  688. #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
  689. // Define Stepper XY positions for Z1, Z2, Z3 corresponding to
  690. // the Z screw positions in the bed carriage.
  691. // Define one position per Z stepper in stepper driver order.
  692. #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
  693. #else
  694. // Amplification factor. Used to scale the correction step up or down in case
  695. // the stepper (spindle) position is farther out than the test point.
  696. #define Z_STEPPER_ALIGN_AMP 1.0 // Use a value > 1.0 NOTE: This may cause instability!
  697. #endif
  698. // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
  699. #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle
  700. #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment
  701. #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this
  702. #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done?
  703. // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
  704. // Re-homing might be more precise in reproducing the actual 'G28 Z' homing height, especially on an uneven bed.
  705. #define HOME_AFTER_G34
  706. #endif
  707. //
  708. // Add the G35 command to read bed corners to help adjust screws. Requires a bed probe.
  709. //
  710. //#define ASSISTED_TRAMMING
  711. #if ENABLED(ASSISTED_TRAMMING)
  712. // Define positions for probing points, use the hotend as reference not the sensor.
  713. #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } }
  714. // Define positions names for probing points.
  715. #define TRAMMING_POINT_NAME_1 "Front-Left"
  716. #define TRAMMING_POINT_NAME_2 "Front-Right"
  717. #define TRAMMING_POINT_NAME_3 "Back-Right"
  718. #define TRAMMING_POINT_NAME_4 "Back-Left"
  719. // Enable to restore leveling setup after operation
  720. #define RESTORE_LEVELING_AFTER_G35
  721. // Add a menu item for Assisted Tramming
  722. //#define ASSISTED_TRAMMING_MENU_ITEM
  723. /**
  724. * Screw thread:
  725. * M3: 30 = Clockwise, 31 = Counter-Clockwise
  726. * M4: 40 = Clockwise, 41 = Counter-Clockwise
  727. * M5: 50 = Clockwise, 51 = Counter-Clockwise
  728. */
  729. #define TRAMMING_SCREW_THREAD 30
  730. #endif
  731. // @section motion
  732. #define AXIS_RELATIVE_MODES { false, false, false, false }
  733. // Add a Duplicate option for well-separated conjoined nozzles
  734. //#define MULTI_NOZZLE_DUPLICATION
  735. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
  736. #define INVERT_X_STEP_PIN false
  737. #define INVERT_Y_STEP_PIN false
  738. #define INVERT_Z_STEP_PIN false
  739. #define INVERT_E_STEP_PIN false
  740. /**
  741. * Idle Stepper Shutdown
  742. * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
  743. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
  744. */
  745. #define DEFAULT_STEPPER_DEACTIVE_TIME 120
  746. #define DISABLE_INACTIVE_X true
  747. #define DISABLE_INACTIVE_Y true
  748. #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part!
  749. #define DISABLE_INACTIVE_E true
  750. // If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here.
  751. //#define Z_AFTER_DEACTIVATE Z_HOME_POS
  752. //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated
  753. // Default Minimum Feedrates for printing and travel moves
  754. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
  755. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
  756. // Minimum time that a segment needs to take as the buffer gets emptied
  757. #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
  758. // Slow down the machine if the lookahead buffer is (by default) half full.
  759. // Increase the slowdown divisor for larger buffer sizes.
  760. #define SLOWDOWN
  761. #if ENABLED(SLOWDOWN)
  762. #define SLOWDOWN_DIVISOR 2
  763. #endif
  764. /**
  765. * XY Frequency limit
  766. * Reduce resonance by limiting the frequency of small zigzag infill moves.
  767. * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html
  768. * Use M201 F<freq> G<min%> to change limits at runtime.
  769. */
  770. //#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F<hertz>.
  771. #ifdef XY_FREQUENCY_LIMIT
  772. #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G<min%>.
  773. #endif
  774. // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
  775. // of the buffer and all stops. This should not be much greater than zero and should only be changed
  776. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
  777. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
  778. //
  779. // Backlash Compensation
  780. // Adds extra movement to axes on direction-changes to account for backlash.
  781. //
  782. //#define BACKLASH_COMPENSATION
  783. #if ENABLED(BACKLASH_COMPENSATION)
  784. // Define values for backlash distance and correction.
  785. // If BACKLASH_GCODE is enabled these values are the defaults.
  786. #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm)
  787. #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction
  788. // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments
  789. // to reduce print artifacts. (Enabling this is costly in memory and computation!)
  790. //#define BACKLASH_SMOOTHING_MM 3 // (mm)
  791. // Add runtime configuration and tuning of backlash values (M425)
  792. //#define BACKLASH_GCODE
  793. #if ENABLED(BACKLASH_GCODE)
  794. // Measure the Z backlash when probing (G29) and set with "M425 Z"
  795. #define MEASURE_BACKLASH_WHEN_PROBING
  796. #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
  797. // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT
  798. // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION
  799. // increments while checking for the contact to be broken.
  800. #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm)
  801. #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm)
  802. #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/min)
  803. #endif
  804. #endif
  805. #endif
  806. /**
  807. * Automatic backlash, position and hotend offset calibration
  808. *
  809. * Enable G425 to run automatic calibration using an electrically-
  810. * conductive cube, bolt, or washer mounted on the bed.
  811. *
  812. * G425 uses the probe to touch the top and sides of the calibration object
  813. * on the bed and measures and/or correct positional offsets, axis backlash
  814. * and hotend offsets.
  815. *
  816. * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within
  817. * ±5mm of true values for G425 to succeed.
  818. */
  819. //#define CALIBRATION_GCODE
  820. #if ENABLED(CALIBRATION_GCODE)
  821. //#define CALIBRATION_SCRIPT_PRE "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..."
  822. //#define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved"
  823. #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm
  824. #define CALIBRATION_FEEDRATE_SLOW 60 // mm/min
  825. #define CALIBRATION_FEEDRATE_FAST 1200 // mm/min
  826. #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/min
  827. // The following parameters refer to the conical section of the nozzle tip.
  828. #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
  829. #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
  830. // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM).
  831. //#define CALIBRATION_REPORTING
  832. // The true location and dimension the cube/bolt/washer on the bed.
  833. #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
  834. #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
  835. // Comment out any sides which are unreachable by the probe. For best
  836. // auto-calibration results, all sides must be reachable.
  837. #define CALIBRATION_MEASURE_RIGHT
  838. #define CALIBRATION_MEASURE_FRONT
  839. #define CALIBRATION_MEASURE_LEFT
  840. #define CALIBRATION_MEASURE_BACK
  841. // Probing at the exact top center only works if the center is flat. If
  842. // probing on a screwhead or hollow washer, probe near the edges.
  843. //#define CALIBRATION_MEASURE_AT_TOP_EDGES
  844. // Define the pin to read during calibration
  845. #ifndef CALIBRATION_PIN
  846. //#define CALIBRATION_PIN -1 // Define here to override the default pin
  847. #define CALIBRATION_PIN_INVERTING false // Set to true to invert the custom pin
  848. //#define CALIBRATION_PIN_PULLDOWN
  849. #define CALIBRATION_PIN_PULLUP
  850. #endif
  851. #endif
  852. /**
  853. * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
  854. * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
  855. * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
  856. * lowest stepping frequencies.
  857. */
  858. //#define ADAPTIVE_STEP_SMOOTHING
  859. /**
  860. * Custom Microstepping
  861. * Override as-needed for your setup. Up to 3 MS pins are supported.
  862. */
  863. //#define MICROSTEP1 LOW,LOW,LOW
  864. //#define MICROSTEP2 HIGH,LOW,LOW
  865. //#define MICROSTEP4 LOW,HIGH,LOW
  866. //#define MICROSTEP8 HIGH,HIGH,LOW
  867. //#define MICROSTEP16 LOW,LOW,HIGH
  868. //#define MICROSTEP32 HIGH,LOW,HIGH
  869. // Microstep settings (Requires a board with pins named X_MS1, X_MS2, etc.)
  870. #define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
  871. /**
  872. * @section stepper motor current
  873. *
  874. * Some boards have a means of setting the stepper motor current via firmware.
  875. *
  876. * The power on motor currents are set by:
  877. * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
  878. * known compatible chips: A4982
  879. * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
  880. * known compatible chips: AD5206
  881. * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
  882. * known compatible chips: MCP4728
  883. * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
  884. * known compatible chips: MCP4451, MCP4018
  885. *
  886. * Motor currents can also be set by M907 - M910 and by the LCD.
  887. * M907 - applies to all.
  888. * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
  889. * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
  890. */
  891. //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps
  892. //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
  893. //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
  894. /**
  895. * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro)
  896. */
  897. //#define DIGIPOT_MCP4018 // Requires https://github.com/stawel/SlowSoftI2CMaster
  898. //#define DIGIPOT_MCP4451
  899. #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451)
  900. #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5
  901. // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
  902. // These correspond to the physical drivers, so be mindful if the order is changed.
  903. #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
  904. //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents)
  905. /**
  906. * Common slave addresses:
  907. *
  908. * A (A shifted) B (B shifted) IC
  909. * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451
  910. * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451
  911. * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451
  912. * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451
  913. * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018
  914. */
  915. //#define DIGIPOT_I2C_ADDRESS_A 0x2C // Unshifted slave address for first DIGIPOT
  916. //#define DIGIPOT_I2C_ADDRESS_B 0x2D // Unshifted slave address for second DIGIPOT
  917. #endif
  918. //===========================================================================
  919. //=============================Additional Features===========================
  920. //===========================================================================
  921. // @section lcd
  922. #if EITHER(ULTIPANEL, EXTENSIBLE_UI)
  923. #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
  924. #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
  925. #if ENABLED(ULTIPANEL)
  926. #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
  927. #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
  928. #endif
  929. #endif
  930. // Change values more rapidly when the encoder is rotated faster
  931. #define ENCODER_RATE_MULTIPLIER
  932. #if ENABLED(ENCODER_RATE_MULTIPLIER)
  933. #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed
  934. #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
  935. #endif
  936. // Play a beep when the feedrate is changed from the Status Screen
  937. //#define BEEP_ON_FEEDRATE_CHANGE
  938. #if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
  939. #define FEEDRATE_CHANGE_BEEP_DURATION 10
  940. #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
  941. #endif
  942. #if HAS_LCD_MENU
  943. // Add Probe Z Offset calibration to the Z Probe Offsets menu
  944. #if HAS_BED_PROBE
  945. //#define PROBE_OFFSET_WIZARD
  946. #if ENABLED(PROBE_OFFSET_WIZARD)
  947. #define PROBE_OFFSET_START -4.0 // Estimated nozzle-to-probe Z offset, plus a little extra
  948. #endif
  949. #endif
  950. // Include a page of printer information in the LCD Main Menu
  951. //#define LCD_INFO_MENU
  952. #if ENABLED(LCD_INFO_MENU)
  953. //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
  954. #endif
  955. // BACK menu items keep the highlight at the top
  956. //#define TURBO_BACK_MENU_ITEM
  957. /**
  958. * LED Control Menu
  959. * Add LED Control to the LCD menu
  960. */
  961. //#define LED_CONTROL_MENU
  962. #if ENABLED(LED_CONTROL_MENU)
  963. #define LED_COLOR_PRESETS // Enable the Preset Color menu option
  964. //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option
  965. #if ENABLED(LED_COLOR_PRESETS)
  966. #define LED_USER_PRESET_RED 255 // User defined RED value
  967. #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
  968. #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
  969. #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
  970. #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
  971. //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
  972. #endif
  973. #if ENABLED(NEO2_COLOR_PRESETS)
  974. #define NEO2_USER_PRESET_RED 255 // User defined RED value
  975. #define NEO2_USER_PRESET_GREEN 128 // User defined GREEN value
  976. #define NEO2_USER_PRESET_BLUE 0 // User defined BLUE value
  977. #define NEO2_USER_PRESET_WHITE 255 // User defined WHITE value
  978. #define NEO2_USER_PRESET_BRIGHTNESS 255 // User defined intensity
  979. //#define NEO2_USER_PRESET_STARTUP // Have the printer display the user preset color on startup for the second strip
  980. #endif
  981. #endif
  982. #endif // HAS_LCD_MENU
  983. // Scroll a longer status message into view
  984. //#define STATUS_MESSAGE_SCROLLING
  985. // On the Info Screen, display XY with one decimal place when possible
  986. //#define LCD_DECIMAL_SMALL_XY
  987. // The timeout (in ms) to return to the status screen from sub-menus
  988. //#define LCD_TIMEOUT_TO_STATUS 15000
  989. // Add an 'M73' G-code to set the current percentage
  990. //#define LCD_SET_PROGRESS_MANUALLY
  991. // Show the E position (filament used) during printing
  992. //#define LCD_SHOW_E_TOTAL
  993. #if ENABLED(SHOW_BOOTSCREEN)
  994. #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s)
  995. #endif
  996. #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
  997. //#define SHOW_REMAINING_TIME // Display estimated time to completion
  998. #if ENABLED(SHOW_REMAINING_TIME)
  999. //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
  1000. //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
  1001. #endif
  1002. #if HAS_MARLINUI_U8GLIB
  1003. //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
  1004. #endif
  1005. #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
  1006. //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
  1007. #if ENABLED(LCD_PROGRESS_BAR)
  1008. #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
  1009. #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message
  1010. #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever)
  1011. //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it
  1012. //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar
  1013. #endif
  1014. #endif
  1015. #endif
  1016. #if ENABLED(SDSUPPORT)
  1017. // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
  1018. // Enable this option and set to HIGH if your SD cards are incorrectly detected.
  1019. //#define SD_DETECT_STATE HIGH
  1020. //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash)
  1021. #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls
  1022. #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
  1023. #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place
  1024. // Reverse SD sort to show "more recent" files first, according to the card's FAT.
  1025. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  1026. #define SDCARD_RATHERRECENTFIRST
  1027. #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing
  1028. //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files
  1029. #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
  1030. #if ENABLED(PRINTER_EVENT_LEDS)
  1031. #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
  1032. #endif
  1033. /**
  1034. * Continue after Power-Loss (Creality3D)
  1035. *
  1036. * Store the current state to the SD Card at the start of each layer
  1037. * during SD printing. If the recovery file is found at boot time, present
  1038. * an option on the LCD screen to continue the print from the last-known
  1039. * point in the file.
  1040. */
  1041. //#define POWER_LOSS_RECOVERY
  1042. #if ENABLED(POWER_LOSS_RECOVERY)
  1043. #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
  1044. //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
  1045. //#define POWER_LOSS_RECOVER_ZHOME // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
  1046. //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
  1047. //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
  1048. //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
  1049. //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate
  1050. //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
  1051. //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
  1052. // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
  1053. // especially with "vase mode" printing. Set too high and vases cannot be continued.
  1054. #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
  1055. #endif
  1056. /**
  1057. * Sort SD file listings in alphabetical order.
  1058. *
  1059. * With this option enabled, items on SD cards will be sorted
  1060. * by name for easier navigation.
  1061. *
  1062. * By default...
  1063. *
  1064. * - Use the slowest -but safest- method for sorting.
  1065. * - Folders are sorted to the top.
  1066. * - The sort key is statically allocated.
  1067. * - No added G-code (M34) support.
  1068. * - 40 item sorting limit. (Items after the first 40 are unsorted.)
  1069. *
  1070. * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the
  1071. * compiler to calculate the worst-case usage and throw an error if the SRAM
  1072. * limit is exceeded.
  1073. *
  1074. * - SDSORT_USES_RAM provides faster sorting via a static directory buffer.
  1075. * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer.
  1076. * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
  1077. * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
  1078. */
  1079. //#define SDCARD_SORT_ALPHA
  1080. // SD Card Sorting options
  1081. #if ENABLED(SDCARD_SORT_ALPHA)
  1082. #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
  1083. #define FOLDER_SORTING -1 // -1=above 0=none 1=below
  1084. #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code.
  1085. #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
  1086. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
  1087. #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
  1088. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
  1089. #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
  1090. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
  1091. #endif
  1092. // This allows hosts to request long names for files and folders with M33
  1093. //#define LONG_FILENAME_HOST_SUPPORT
  1094. // Enable this option to scroll long filenames in the SD card menu
  1095. //#define SCROLL_LONG_FILENAMES
  1096. // Leave the heaters on after Stop Print (not recommended!)
  1097. //#define SD_ABORT_NO_COOLDOWN
  1098. /**
  1099. * This option allows you to abort SD printing when any endstop is triggered.
  1100. * This feature must be enabled with "M540 S1" or from the LCD menu.
  1101. * To have any effect, endstops must be enabled during SD printing.
  1102. */
  1103. //#define SD_ABORT_ON_ENDSTOP_HIT
  1104. /**
  1105. * This option makes it easier to print the same SD Card file again.
  1106. * On print completion the LCD Menu will open with the file selected.
  1107. * You can just click to start the print, or navigate elsewhere.
  1108. */
  1109. //#define SD_REPRINT_LAST_SELECTED_FILE
  1110. /**
  1111. * Auto-report SdCard status with M27 S<seconds>
  1112. */
  1113. //#define AUTO_REPORT_SD_STATUS
  1114. /**
  1115. * Support for USB thumb drives using an Arduino USB Host Shield or
  1116. * equivalent MAX3421E breakout board. The USB thumb drive will appear
  1117. * to Marlin as an SD card.
  1118. *
  1119. * The MAX3421E can be assigned the same pins as the SD card reader, with
  1120. * the following pin mapping:
  1121. *
  1122. * SCLK, MOSI, MISO --> SCLK, MOSI, MISO
  1123. * INT --> SD_DETECT_PIN [1]
  1124. * SS --> SDSS
  1125. *
  1126. * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility.
  1127. */
  1128. //#define USB_FLASH_DRIVE_SUPPORT
  1129. #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
  1130. #define USB_CS_PIN SDSS
  1131. #define USB_INTR_PIN SD_DETECT_PIN
  1132. /**
  1133. * USB Host Shield Library
  1134. *
  1135. * - UHS2 uses no interrupts and has been production-tested
  1136. * on a LulzBot TAZ Pro with a 32-bit Archim board.
  1137. *
  1138. * - UHS3 is newer code with better USB compatibility. But it
  1139. * is less tested and is known to interfere with Servos.
  1140. * [1] This requires USB_INTR_PIN to be interrupt-capable.
  1141. */
  1142. //#define USE_UHS3_USB
  1143. #endif
  1144. /**
  1145. * When using a bootloader that supports SD-Firmware-Flashing,
  1146. * add a menu item to activate SD-FW-Update on the next reboot.
  1147. *
  1148. * Requires ATMEGA2560 (Arduino Mega)
  1149. *
  1150. * Tested with this bootloader:
  1151. * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560
  1152. */
  1153. //#define SD_FIRMWARE_UPDATE
  1154. #if ENABLED(SD_FIRMWARE_UPDATE)
  1155. #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF
  1156. #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0
  1157. #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF
  1158. #endif
  1159. // Add an optimized binary file transfer mode, initiated with 'M28 B1'
  1160. //#define BINARY_FILE_TRANSFER
  1161. /**
  1162. * Set this option to one of the following (or the board's defaults apply):
  1163. *
  1164. * LCD - Use the SD drive in the external LCD controller.
  1165. * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
  1166. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
  1167. *
  1168. * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
  1169. */
  1170. //#define SDCARD_CONNECTION LCD
  1171. #endif // SDSUPPORT
  1172. /**
  1173. * By default an onboard SD card reader may be shared as a USB mass-
  1174. * storage device. This option hides the SD card from the host PC.
  1175. */
  1176. //#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
  1177. /**
  1178. * Additional options for Graphical Displays
  1179. *
  1180. * Use the optimizations here to improve printing performance,
  1181. * which can be adversely affected by graphical display drawing,
  1182. * especially when doing several short moves, and when printing
  1183. * on DELTA and SCARA machines.
  1184. *
  1185. * Some of these options may result in the display lagging behind
  1186. * controller events, as there is a trade-off between reliable
  1187. * printing performance versus fast display updates.
  1188. */
  1189. #if HAS_MARLINUI_U8GLIB
  1190. // Show SD percentage next to the progress bar
  1191. //#define DOGM_SD_PERCENT
  1192. // Save many cycles by drawing a hollow frame or no frame on the Info Screen
  1193. //#define XYZ_NO_FRAME
  1194. #define XYZ_HOLLOW_FRAME
  1195. // Enable to save many cycles by drawing a hollow frame on Menu Screens
  1196. #define MENU_HOLLOW_FRAME
  1197. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
  1198. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  1199. //#define USE_BIG_EDIT_FONT
  1200. // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM.
  1201. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  1202. //#define USE_SMALL_INFOFONT
  1203. // Swap the CW/CCW indicators in the graphics overlay
  1204. //#define OVERLAY_GFX_REVERSE
  1205. /**
  1206. * ST7920-based LCDs can emulate a 16 x 4 character display using
  1207. * the ST7920 character-generator for very fast screen updates.
  1208. * Enable LIGHTWEIGHT_UI to use this special display mode.
  1209. *
  1210. * Since LIGHTWEIGHT_UI has limited space, the position and status
  1211. * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
  1212. * length of time to display the status message before clearing.
  1213. *
  1214. * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
  1215. * This will prevent position updates from being displayed.
  1216. */
  1217. #if ENABLED(U8GLIB_ST7920)
  1218. // Enable this option and reduce the value to optimize screen updates.
  1219. // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
  1220. //#define DOGM_SPI_DELAY_US 5
  1221. //#define LIGHTWEIGHT_UI
  1222. #if ENABLED(LIGHTWEIGHT_UI)
  1223. #define STATUS_EXPIRE_SECONDS 20
  1224. #endif
  1225. #endif
  1226. /**
  1227. * Status (Info) Screen customizations
  1228. * These options may affect code size and screen render time.
  1229. * Custom status screens can forcibly override these settings.
  1230. */
  1231. //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
  1232. //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
  1233. #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
  1234. #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
  1235. #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
  1236. #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
  1237. //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
  1238. //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
  1239. //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
  1240. //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
  1241. //#define STATUS_HEAT_PERCENT // Show heating in a progress bar
  1242. //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
  1243. //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM.
  1244. // Frivolous Game Options
  1245. //#define MARLIN_BRICKOUT
  1246. //#define MARLIN_INVADERS
  1247. //#define MARLIN_SNAKE
  1248. //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu
  1249. #endif // HAS_MARLINUI_U8GLIB
  1250. //
  1251. // Additional options for DGUS / DWIN displays
  1252. //
  1253. #if HAS_DGUS_LCD
  1254. #define LCD_SERIAL_PORT 3
  1255. #define LCD_BAUDRATE 115200
  1256. #define DGUS_RX_BUFFER_SIZE 128
  1257. #define DGUS_TX_BUFFER_SIZE 48
  1258. //#define SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
  1259. #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
  1260. #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
  1261. #define DGUS_PRINT_FILENAME // Display the filename during printing
  1262. #define DGUS_PREHEAT_UI // Display a preheat screen during heatup
  1263. #if ENABLED(DGUS_LCD_UI_FYSETC)
  1264. //#define DGUS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
  1265. #else
  1266. #define DGUS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
  1267. #endif
  1268. #define DGUS_FILAMENT_LOADUNLOAD
  1269. #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
  1270. #define DGUS_FILAMENT_PURGE_LENGTH 10
  1271. #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
  1272. #endif
  1273. #define DGUS_UI_WAITING // Show a "waiting" screen between some screens
  1274. #if ENABLED(DGUS_UI_WAITING)
  1275. #define DGUS_UI_WAITING_STATUS 10
  1276. #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
  1277. #endif
  1278. #endif
  1279. #endif // HAS_DGUS_LCD
  1280. //
  1281. // Touch UI for the FTDI Embedded Video Engine (EVE)
  1282. //
  1283. #if ENABLED(TOUCH_UI_FTDI_EVE)
  1284. // Display board used
  1285. //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
  1286. //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
  1287. //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
  1288. //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
  1289. //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
  1290. //#define LCD_FYSETC_TFT81050 // FYSETC with 5" (800x480)
  1291. // Correct the resolution if not using the stock TFT panel.
  1292. //#define TOUCH_UI_320x240
  1293. //#define TOUCH_UI_480x272
  1294. //#define TOUCH_UI_800x480
  1295. // Mappings for boards with a standard RepRapDiscount Display connector
  1296. //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
  1297. //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
  1298. //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
  1299. //#define S6_TFT_PINMAP // FYSETC S6 pin mapping
  1300. //#define F6_TFT_PINMAP // FYSETC F6 pin mapping
  1301. //#define OTHER_PIN_LAYOUT // Define pins manually below
  1302. #if ENABLED(OTHER_PIN_LAYOUT)
  1303. // Pins for CS and MOD_RESET (PD) must be chosen
  1304. #define CLCD_MOD_RESET 9
  1305. #define CLCD_SPI_CS 10
  1306. // If using software SPI, specify pins for SCLK, MOSI, MISO
  1307. //#define CLCD_USE_SOFT_SPI
  1308. #if ENABLED(CLCD_USE_SOFT_SPI)
  1309. #define CLCD_SOFT_SPI_MOSI 11
  1310. #define CLCD_SOFT_SPI_MISO 12
  1311. #define CLCD_SOFT_SPI_SCLK 13
  1312. #endif
  1313. #endif
  1314. // Display Orientation. An inverted (i.e. upside-down) display
  1315. // is supported on the FT800. The FT810 and beyond also support
  1316. // portrait and mirrored orientations.
  1317. //#define TOUCH_UI_INVERTED
  1318. //#define TOUCH_UI_PORTRAIT
  1319. //#define TOUCH_UI_MIRRORED
  1320. // UTF8 processing and rendering.
  1321. // Unsupported characters are shown as '?'.
  1322. //#define TOUCH_UI_USE_UTF8
  1323. #if ENABLED(TOUCH_UI_USE_UTF8)
  1324. // Western accents support. These accented characters use
  1325. // combined bitmaps and require relatively little storage.
  1326. #define TOUCH_UI_UTF8_WESTERN_CHARSET
  1327. #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET)
  1328. // Additional character groups. These characters require
  1329. // full bitmaps and take up considerable storage:
  1330. //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³
  1331. //#define TOUCH_UI_UTF8_COPYRIGHT // © ®
  1332. //#define TOUCH_UI_UTF8_GERMANIC // ß
  1333. //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ
  1334. //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡
  1335. //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥
  1336. //#define TOUCH_UI_UTF8_ORDINALS // º ª
  1337. //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷
  1338. //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾
  1339. //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬
  1340. #endif
  1341. #endif
  1342. // Use a smaller font when labels don't fit buttons
  1343. #define TOUCH_UI_FIT_TEXT
  1344. // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE)
  1345. //#define LCD_LANGUAGE_1 en
  1346. //#define LCD_LANGUAGE_2 fr
  1347. //#define LCD_LANGUAGE_3 de
  1348. //#define LCD_LANGUAGE_4 es
  1349. //#define LCD_LANGUAGE_5 it
  1350. // Use a numeric passcode for "Screen lock" keypad.
  1351. // (recommended for smaller displays)
  1352. //#define TOUCH_UI_PASSCODE
  1353. // Output extra debug info for Touch UI events
  1354. //#define TOUCH_UI_DEBUG
  1355. // Developer menu (accessed by touching "About Printer" copyright text)
  1356. //#define TOUCH_UI_DEVELOPER_MENU
  1357. #endif
  1358. //
  1359. // Classic UI Options
  1360. //
  1361. #if TFT_SCALED_DOGLCD
  1362. //#define TFT_MARLINUI_COLOR 0xFFFF // White
  1363. //#define TFT_MARLINBG_COLOR 0x0000 // Black
  1364. //#define TFT_DISABLED_COLOR 0x0003 // Almost black
  1365. //#define TFT_BTCANCEL_COLOR 0xF800 // Red
  1366. //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow
  1367. //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
  1368. #endif
  1369. //
  1370. // ADC Button Debounce
  1371. //
  1372. #if HAS_ADC_BUTTONS
  1373. #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast
  1374. #endif
  1375. // @section safety
  1376. /**
  1377. * The watchdog hardware timer will do a reset and disable all outputs
  1378. * if the firmware gets too overloaded to read the temperature sensors.
  1379. *
  1380. * If you find that watchdog reboot causes your AVR board to hang forever,
  1381. * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO.
  1382. * NOTE: This method is less reliable as it can only catch hangups while
  1383. * interrupts are enabled.
  1384. */
  1385. #define USE_WATCHDOG
  1386. #if ENABLED(USE_WATCHDOG)
  1387. //#define WATCHDOG_RESET_MANUAL
  1388. #endif
  1389. // @section lcd
  1390. /**
  1391. * Babystepping enables movement of the axes by tiny increments without changing
  1392. * the current position values. This feature is used primarily to adjust the Z
  1393. * axis in the first layer of a print in real-time.
  1394. *
  1395. * Warning: Does not respect endstops!
  1396. */
  1397. //#define BABYSTEPPING
  1398. #if ENABLED(BABYSTEPPING)
  1399. //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
  1400. //#define BABYSTEP_WITHOUT_HOMING
  1401. //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
  1402. //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
  1403. #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
  1404. //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
  1405. #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
  1406. #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
  1407. //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
  1408. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
  1409. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
  1410. // Note: Extra time may be added to mitigate controller latency.
  1411. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
  1412. #if ENABLED(MOVE_Z_WHEN_IDLE)
  1413. #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
  1414. #endif
  1415. #endif
  1416. //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
  1417. //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
  1418. #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
  1419. //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
  1420. //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
  1421. #endif
  1422. #endif
  1423. // @section extruder
  1424. /**
  1425. * Linear Pressure Control v1.5
  1426. *
  1427. * Assumption: advance [steps] = k * (delta velocity [steps/s])
  1428. * K=0 means advance disabled.
  1429. *
  1430. * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
  1431. *
  1432. * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
  1433. * Larger K values will be needed for flexible filament and greater distances.
  1434. * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
  1435. * print acceleration will be reduced during the affected moves to keep within the limit.
  1436. *
  1437. * See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
  1438. */
  1439. //#define LIN_ADVANCE
  1440. #if ENABLED(LIN_ADVANCE)
  1441. //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
  1442. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
  1443. //#define LA_DEBUG // If enabled, this will generate debug information output over USB.
  1444. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
  1445. #endif
  1446. // @section leveling
  1447. /**
  1448. * Points to probe for all 3-point Leveling procedures.
  1449. * Override if the automatically selected points are inadequate.
  1450. */
  1451. #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
  1452. //#define PROBE_PT_1_X 15
  1453. //#define PROBE_PT_1_Y 180
  1454. //#define PROBE_PT_2_X 15
  1455. //#define PROBE_PT_2_Y 20
  1456. //#define PROBE_PT_3_X 170
  1457. //#define PROBE_PT_3_Y 20
  1458. #endif
  1459. /**
  1460. * Probing Margins
  1461. *
  1462. * Override PROBING_MARGIN for each side of the build plate
  1463. * Useful to get probe points to exact positions on targets or
  1464. * to allow leveling to avoid plate clamps on only specific
  1465. * sides of the bed. With NOZZLE_AS_PROBE negative values are
  1466. * allowed, to permit probing outside the bed.
  1467. *
  1468. * If you are replacing the prior *_PROBE_BED_POSITION options,
  1469. * LEFT and FRONT values in most cases will map directly over
  1470. * RIGHT and REAR would be the inverse such as
  1471. * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION)
  1472. *
  1473. * This will allow all positions to match at compilation, however
  1474. * should the probe position be modified with M851XY then the
  1475. * probe points will follow. This prevents any change from causing
  1476. * the probe to be unable to reach any points.
  1477. */
  1478. #if PROBE_SELECTED && !IS_KINEMATIC
  1479. //#define PROBING_MARGIN_LEFT PROBING_MARGIN
  1480. //#define PROBING_MARGIN_RIGHT PROBING_MARGIN
  1481. //#define PROBING_MARGIN_FRONT PROBING_MARGIN
  1482. //#define PROBING_MARGIN_BACK PROBING_MARGIN
  1483. #endif
  1484. #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
  1485. // Override the mesh area if the automatic (max) area is too large
  1486. //#define MESH_MIN_X MESH_INSET
  1487. //#define MESH_MIN_Y MESH_INSET
  1488. //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
  1489. //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
  1490. #endif
  1491. /**
  1492. * Repeatedly attempt G29 leveling until it succeeds.
  1493. * Stop after G29_MAX_RETRIES attempts.
  1494. */
  1495. //#define G29_RETRY_AND_RECOVER
  1496. #if ENABLED(G29_RETRY_AND_RECOVER)
  1497. #define G29_MAX_RETRIES 3
  1498. #define G29_HALT_ON_FAILURE
  1499. /**
  1500. * Specify the GCODE commands that will be executed when leveling succeeds,
  1501. * between attempts, and after the maximum number of retries have been tried.
  1502. */
  1503. #define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
  1504. #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
  1505. #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
  1506. #endif
  1507. /**
  1508. * Thermal Probe Compensation
  1509. * Probe measurements are adjusted to compensate for temperature distortion.
  1510. * Use G76 to calibrate this feature. Use M871 to set values manually.
  1511. * For a more detailed explanation of the process see G76_M871.cpp.
  1512. */
  1513. #if HAS_BED_PROBE && TEMP_SENSOR_PROBE && TEMP_SENSOR_BED
  1514. // Enable thermal first layer compensation using bed and probe temperatures
  1515. #define PROBE_TEMP_COMPENSATION
  1516. // Add additional compensation depending on hotend temperature
  1517. // Note: this values cannot be calibrated and have to be set manually
  1518. #if ENABLED(PROBE_TEMP_COMPENSATION)
  1519. // Park position to wait for probe cooldown
  1520. #define PTC_PARK_POS { 0, 0, 100 }
  1521. // Probe position to probe and wait for probe to reach target temperature
  1522. #define PTC_PROBE_POS { 90, 100 }
  1523. // Enable additional compensation using hotend temperature
  1524. // Note: this values cannot be calibrated automatically but have to be set manually
  1525. //#define USE_TEMP_EXT_COMPENSATION
  1526. // Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
  1527. // (e.g. 30), in steps of PTC_SAMPLE_RES (e.g. 5) with PTC_SAMPLE_COUNT (e.g. 10) samples.
  1528. //#define PTC_SAMPLE_START 30.0f
  1529. //#define PTC_SAMPLE_RES 5.0f
  1530. //#define PTC_SAMPLE_COUNT 10U
  1531. // Bed temperature calibration builds a similar table.
  1532. //#define BTC_SAMPLE_START 60.0f
  1533. //#define BTC_SAMPLE_RES 5.0f
  1534. //#define BTC_SAMPLE_COUNT 10U
  1535. // The temperature the probe should be at while taking measurements during bed temperature
  1536. // calibration.
  1537. //#define BTC_PROBE_TEMP 30.0f
  1538. // Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
  1539. // Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
  1540. //#define PTC_PROBE_HEATING_OFFSET 0.5f
  1541. // Height to raise the Z-probe between heating and taking the next measurement. Some probes
  1542. // may fail to untrigger if they have been triggered for a long time, which can be solved by
  1543. // increasing the height the probe is raised to.
  1544. //#define PTC_PROBE_RAISE 15U
  1545. // If the probe is outside of the defined range, use linear extrapolation using the closest
  1546. // point and the PTC_LINEAR_EXTRAPOLATION'th next point. E.g. if set to 4 it will use data[0]
  1547. // and data[4] to perform linear extrapolation for values below PTC_SAMPLE_START.
  1548. //#define PTC_LINEAR_EXTRAPOLATION 4
  1549. #endif
  1550. #endif
  1551. // @section extras
  1552. //
  1553. // G60/G61 Position Save and Return
  1554. //
  1555. //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
  1556. //
  1557. // G2/G3 Arc Support
  1558. //
  1559. #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
  1560. #if ENABLED(ARC_SUPPORT)
  1561. #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
  1562. //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min
  1563. #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
  1564. //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
  1565. #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
  1566. //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
  1567. //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
  1568. //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure
  1569. #endif
  1570. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
  1571. //#define BEZIER_CURVE_SUPPORT
  1572. /**
  1573. * Direct Stepping
  1574. *
  1575. * Comparable to the method used by Klipper, G6 direct stepping significantly
  1576. * reduces motion calculations, increases top printing speeds, and results in
  1577. * less step aliasing by calculating all motions in advance.
  1578. * Preparing your G-code: https://github.com/colinrgodsey/step-daemon
  1579. */
  1580. //#define DIRECT_STEPPING
  1581. /**
  1582. * G38 Probe Target
  1583. *
  1584. * This option adds G38.2 and G38.3 (probe towards target)
  1585. * and optionally G38.4 and G38.5 (probe away from target).
  1586. * Set MULTIPLE_PROBING for G38 to probe more than once.
  1587. */
  1588. //#define G38_PROBE_TARGET
  1589. #if ENABLED(G38_PROBE_TARGET)
  1590. //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
  1591. #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
  1592. #endif
  1593. // Moves (or segments) with fewer steps than this will be joined with the next move
  1594. #define MIN_STEPS_PER_SEGMENT 6
  1595. /**
  1596. * Minimum delay before and after setting the stepper DIR (in ns)
  1597. * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  1598. * 20 : Minimum for TMC2xxx drivers
  1599. * 200 : Minimum for A4988 drivers
  1600. * 400 : Minimum for A5984 drivers
  1601. * 500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  1602. * 650 : Minimum for DRV8825 drivers
  1603. * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
  1604. * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
  1605. *
  1606. * Override the default value based on the driver type set in Configuration.h.
  1607. */
  1608. //#define MINIMUM_STEPPER_POST_DIR_DELAY 650
  1609. //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
  1610. /**
  1611. * Minimum stepper driver pulse width (in µs)
  1612. * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
  1613. * 0 : Minimum 500ns for LV8729, adjusted in stepper.h
  1614. * 1 : Minimum for A4988 and A5984 stepper drivers
  1615. * 2 : Minimum for DRV8825 stepper drivers
  1616. * 3 : Minimum for TB6600 stepper drivers
  1617. * 30 : Minimum for TB6560 stepper drivers
  1618. *
  1619. * Override the default value based on the driver type set in Configuration.h.
  1620. */
  1621. //#define MINIMUM_STEPPER_PULSE 2
  1622. /**
  1623. * Maximum stepping rate (in Hz) the stepper driver allows
  1624. * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
  1625. * 5000000 : Maximum for TMC2xxx stepper drivers
  1626. * 1000000 : Maximum for LV8729 stepper driver
  1627. * 500000 : Maximum for A4988 stepper driver
  1628. * 250000 : Maximum for DRV8825 stepper driver
  1629. * 150000 : Maximum for TB6600 stepper driver
  1630. * 15000 : Maximum for TB6560 stepper driver
  1631. *
  1632. * Override the default value based on the driver type set in Configuration.h.
  1633. */
  1634. //#define MAXIMUM_STEPPER_RATE 250000
  1635. // @section temperature
  1636. // Control heater 0 and heater 1 in parallel.
  1637. //#define HEATERS_PARALLEL
  1638. //===========================================================================
  1639. //================================= Buffers =================================
  1640. //===========================================================================
  1641. // @section motion
  1642. // The number of linear moves that can be in the planner at once.
  1643. // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
  1644. #if BOTH(SDSUPPORT, DIRECT_STEPPING)
  1645. #define BLOCK_BUFFER_SIZE 8
  1646. #elif ENABLED(SDSUPPORT)
  1647. #define BLOCK_BUFFER_SIZE 16
  1648. #else
  1649. #define BLOCK_BUFFER_SIZE 16
  1650. #endif
  1651. // @section serial
  1652. // The ASCII buffer for serial input
  1653. #define MAX_CMD_SIZE 96
  1654. #define BUFSIZE 4
  1655. // Transmission to Host Buffer Size
  1656. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
  1657. // To buffer a simple "ok" you need 4 bytes.
  1658. // For ADVANCED_OK (M105) you need 32 bytes.
  1659. // For debug-echo: 128 bytes for the optimal speed.
  1660. // Other output doesn't need to be that speedy.
  1661. // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
  1662. #define TX_BUFFER_SIZE 0
  1663. // Host Receive Buffer Size
  1664. // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
  1665. // To use flow control, set this buffer size to at least 1024 bytes.
  1666. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
  1667. //#define RX_BUFFER_SIZE 1024
  1668. #if RX_BUFFER_SIZE >= 1024
  1669. // Enable to have the controller send XON/XOFF control characters to
  1670. // the host to signal the RX buffer is becoming full.
  1671. //#define SERIAL_XON_XOFF
  1672. #endif
  1673. // Add M575 G-code to change the baud rate
  1674. //#define BAUD_RATE_GCODE
  1675. #if ENABLED(SDSUPPORT)
  1676. // Enable this option to collect and display the maximum
  1677. // RX queue usage after transferring a file to SD.
  1678. //#define SERIAL_STATS_MAX_RX_QUEUED
  1679. // Enable this option to collect and display the number
  1680. // of dropped bytes after a file transfer to SD.
  1681. //#define SERIAL_STATS_DROPPED_RX
  1682. #endif
  1683. /**
  1684. * Emergency Command Parser
  1685. *
  1686. * Add a low-level parser to intercept certain commands as they
  1687. * enter the serial receive buffer, so they cannot be blocked.
  1688. * Currently handles M108, M112, M410, M876
  1689. * NOTE: Not yet implemented for all platforms.
  1690. */
  1691. //#define EMERGENCY_PARSER
  1692. // Bad Serial-connections can miss a received command by sending an 'ok'
  1693. // Therefore some clients abort after 30 seconds in a timeout.
  1694. // Some other clients start sending commands while receiving a 'wait'.
  1695. // This "wait" is only sent when the buffer is empty. 1 second is a good value here.
  1696. //#define NO_TIMEOUTS 1000 // Milliseconds
  1697. // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
  1698. //#define ADVANCED_OK
  1699. // Printrun may have trouble receiving long strings all at once.
  1700. // This option inserts short delays between lines of serial output.
  1701. #define SERIAL_OVERRUN_PROTECTION
  1702. // For serial echo, the number of digits after the decimal point
  1703. //#define SERIAL_FLOAT_PRECISION 4
  1704. // @section extras
  1705. /**
  1706. * Extra Fan Speed
  1707. * Adds a secondary fan speed for each print-cooling fan.
  1708. * 'M106 P<fan> T3-255' : Set a secondary speed for <fan>
  1709. * 'M106 P<fan> T2' : Use the set secondary speed
  1710. * 'M106 P<fan> T1' : Restore the previous fan speed
  1711. */
  1712. //#define EXTRA_FAN_SPEED
  1713. /**
  1714. * Firmware-based and LCD-controlled retract
  1715. *
  1716. * Add G10 / G11 commands for automatic firmware-based retract / recover.
  1717. * Use M207 and M208 to define parameters for retract / recover.
  1718. *
  1719. * Use M209 to enable or disable auto-retract.
  1720. * With auto-retract enabled, all G1 E moves within the set range
  1721. * will be converted to firmware-based retract/recover moves.
  1722. *
  1723. * Be sure to turn off auto-retract during filament change.
  1724. *
  1725. * Note that M207 / M208 / M209 settings are saved to EEPROM.
  1726. */
  1727. //#define FWRETRACT
  1728. #if ENABLED(FWRETRACT)
  1729. #define FWRETRACT_AUTORETRACT // Override slicer retractions
  1730. #if ENABLED(FWRETRACT_AUTORETRACT)
  1731. #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length
  1732. #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length
  1733. #endif
  1734. #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value)
  1735. #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value)
  1736. #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting
  1737. #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise
  1738. #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover)
  1739. #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange)
  1740. #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction
  1741. #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction
  1742. #if ENABLED(MIXING_EXTRUDER)
  1743. //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously
  1744. #endif
  1745. #endif
  1746. /**
  1747. * Universal tool change settings.
  1748. * Applies to all types of extruders except where explicitly noted.
  1749. */
  1750. #if HAS_MULTI_EXTRUDER
  1751. // Z raise distance for tool-change, as needed for some extruders
  1752. #define TOOLCHANGE_ZRAISE 2 // (mm)
  1753. //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled)
  1754. //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change
  1755. #if ENABLED(TOOLCHANGE_NO_RETURN)
  1756. //#define EVENT_GCODE_AFTER_TOOLCHANGE "G12X" // Extra G-code to run after tool-change
  1757. #endif
  1758. /**
  1759. * Retract and prime filament on tool-change to reduce
  1760. * ooze and stringing and to get cleaner transitions.
  1761. */
  1762. //#define TOOLCHANGE_FILAMENT_SWAP
  1763. #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
  1764. // Load / Unload
  1765. #define TOOLCHANGE_FS_LENGTH 12 // (mm) Load / Unload length
  1766. #define TOOLCHANGE_FS_EXTRA_RESUME_LENGTH 0 // (mm) Extra length for better restart, fine tune by LCD/Gcode)
  1767. #define TOOLCHANGE_FS_RETRACT_SPEED (50*60) // (mm/min) (Unloading)
  1768. #define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/min) (On SINGLENOZZLE or Bowden loading must be slowed down)
  1769. // Longer prime to clean out a SINGLENOZZLE
  1770. #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length
  1771. #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate
  1772. #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm/min) Retract before cooling for less stringing, better wipe, etc.
  1773. // Cool after prime to reduce stringing
  1774. #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip
  1775. #define TOOLCHANGE_FS_FAN_SPEED 255 // 0-255
  1776. #define TOOLCHANGE_FS_FAN_TIME 10 // (seconds)
  1777. // Swap uninitialized extruder with TOOLCHANGE_FS_PRIME_SPEED for all lengths (recover + prime)
  1778. // (May break filament if not retracted beforehand.)
  1779. //#define TOOLCHANGE_FS_INIT_BEFORE_SWAP
  1780. // Prime on the first T0 (If other, TOOLCHANGE_FS_INIT_BEFORE_SWAP applied)
  1781. // Enable it (M217 V[0/1]) before printing, to avoid unwanted priming on host connect
  1782. //#define TOOLCHANGE_FS_PRIME_FIRST_USED
  1783. /**
  1784. * Tool Change Migration
  1785. * This feature provides G-code and LCD options to switch tools mid-print.
  1786. * All applicable tool properties are migrated so the print can continue.
  1787. * Tools must be closely matching and other restrictions may apply.
  1788. * Useful to:
  1789. * - Change filament color without interruption
  1790. * - Switch spools automatically on filament runout
  1791. * - Switch to a different nozzle on an extruder jam
  1792. */
  1793. #define TOOLCHANGE_MIGRATION_FEATURE
  1794. #endif
  1795. /**
  1796. * Position to park head during tool change.
  1797. * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
  1798. */
  1799. //#define TOOLCHANGE_PARK
  1800. #if ENABLED(TOOLCHANGE_PARK)
  1801. #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
  1802. #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/min)
  1803. //#define TOOLCHANGE_PARK_X_ONLY // X axis only move
  1804. //#define TOOLCHANGE_PARK_Y_ONLY // Y axis only move
  1805. #endif
  1806. #endif // HAS_MULTI_EXTRUDER
  1807. /**
  1808. * Advanced Pause
  1809. * Experimental feature for filament change support and for parking the nozzle when paused.
  1810. * Adds the GCode M600 for initiating filament change.
  1811. * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  1812. *
  1813. * Requires an LCD display.
  1814. * Requires NOZZLE_PARK_FEATURE.
  1815. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  1816. */
  1817. //#define ADVANCED_PAUSE_FEATURE
  1818. #if ENABLED(ADVANCED_PAUSE_FEATURE)
  1819. #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
  1820. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
  1821. // This short retract is done immediately, before parking the nozzle.
  1822. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
  1823. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
  1824. #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
  1825. // For Bowden, the full length of the tube and nozzle.
  1826. // For direct drive, the full length of the nozzle.
  1827. // Set to 0 for manual unloading.
  1828. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
  1829. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
  1830. // 0 to disable start loading and skip to fast load only
  1831. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
  1832. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
  1833. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
  1834. // For Bowden, the full length of the tube and nozzle.
  1835. // For direct drive, the full length of the nozzle.
  1836. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
  1837. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
  1838. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading.
  1839. // Set to 0 for manual extrusion.
  1840. // Filament can be extruded repeatedly from the Filament Change menu
  1841. // until extrusion is consistent, and to purge old filament.
  1842. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
  1843. //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
  1844. // Filament Unload does a Retract, Delay, and Purge first:
  1845. #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length.
  1846. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract.
  1847. #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
  1848. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
  1849. #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
  1850. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
  1851. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
  1852. //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
  1853. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
  1854. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
  1855. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
  1856. #endif
  1857. // @section tmc
  1858. /**
  1859. * TMC26X Stepper Driver options
  1860. *
  1861. * The TMC26XStepper library is required for this stepper driver.
  1862. * https://github.com/trinamic/TMC26XStepper
  1863. */
  1864. #if HAS_DRIVER(TMC26X)
  1865. #if AXIS_DRIVER_TYPE_X(TMC26X)
  1866. #define X_MAX_CURRENT 1000 // (mA)
  1867. #define X_SENSE_RESISTOR 91 // (mOhms)
  1868. #define X_MICROSTEPS 16 // Number of microsteps
  1869. #endif
  1870. #if AXIS_DRIVER_TYPE_X2(TMC26X)
  1871. #define X2_MAX_CURRENT 1000
  1872. #define X2_SENSE_RESISTOR 91
  1873. #define X2_MICROSTEPS 16
  1874. #endif
  1875. #if AXIS_DRIVER_TYPE_Y(TMC26X)
  1876. #define Y_MAX_CURRENT 1000
  1877. #define Y_SENSE_RESISTOR 91
  1878. #define Y_MICROSTEPS 16
  1879. #endif
  1880. #if AXIS_DRIVER_TYPE_Y2(TMC26X)
  1881. #define Y2_MAX_CURRENT 1000
  1882. #define Y2_SENSE_RESISTOR 91
  1883. #define Y2_MICROSTEPS 16
  1884. #endif
  1885. #if AXIS_DRIVER_TYPE_Z(TMC26X)
  1886. #define Z_MAX_CURRENT 1000
  1887. #define Z_SENSE_RESISTOR 91
  1888. #define Z_MICROSTEPS 16
  1889. #endif
  1890. #if AXIS_DRIVER_TYPE_Z2(TMC26X)
  1891. #define Z2_MAX_CURRENT 1000
  1892. #define Z2_SENSE_RESISTOR 91
  1893. #define Z2_MICROSTEPS 16
  1894. #endif
  1895. #if AXIS_DRIVER_TYPE_Z3(TMC26X)
  1896. #define Z3_MAX_CURRENT 1000
  1897. #define Z3_SENSE_RESISTOR 91
  1898. #define Z3_MICROSTEPS 16
  1899. #endif
  1900. #if AXIS_DRIVER_TYPE_Z4(TMC26X)
  1901. #define Z4_MAX_CURRENT 1000
  1902. #define Z4_SENSE_RESISTOR 91
  1903. #define Z4_MICROSTEPS 16
  1904. #endif
  1905. #if AXIS_DRIVER_TYPE_E0(TMC26X)
  1906. #define E0_MAX_CURRENT 1000
  1907. #define E0_SENSE_RESISTOR 91
  1908. #define E0_MICROSTEPS 16
  1909. #endif
  1910. #if AXIS_DRIVER_TYPE_E1(TMC26X)
  1911. #define E1_MAX_CURRENT 1000
  1912. #define E1_SENSE_RESISTOR 91
  1913. #define E1_MICROSTEPS 16
  1914. #endif
  1915. #if AXIS_DRIVER_TYPE_E2(TMC26X)
  1916. #define E2_MAX_CURRENT 1000
  1917. #define E2_SENSE_RESISTOR 91
  1918. #define E2_MICROSTEPS 16
  1919. #endif
  1920. #if AXIS_DRIVER_TYPE_E3(TMC26X)
  1921. #define E3_MAX_CURRENT 1000
  1922. #define E3_SENSE_RESISTOR 91
  1923. #define E3_MICROSTEPS 16
  1924. #endif
  1925. #if AXIS_DRIVER_TYPE_E4(TMC26X)
  1926. #define E4_MAX_CURRENT 1000
  1927. #define E4_SENSE_RESISTOR 91
  1928. #define E4_MICROSTEPS 16
  1929. #endif
  1930. #if AXIS_DRIVER_TYPE_E5(TMC26X)
  1931. #define E5_MAX_CURRENT 1000
  1932. #define E5_SENSE_RESISTOR 91
  1933. #define E5_MICROSTEPS 16
  1934. #endif
  1935. #if AXIS_DRIVER_TYPE_E6(TMC26X)
  1936. #define E6_MAX_CURRENT 1000
  1937. #define E6_SENSE_RESISTOR 91
  1938. #define E6_MICROSTEPS 16
  1939. #endif
  1940. #if AXIS_DRIVER_TYPE_E7(TMC26X)
  1941. #define E7_MAX_CURRENT 1000
  1942. #define E7_SENSE_RESISTOR 91
  1943. #define E7_MICROSTEPS 16
  1944. #endif
  1945. #endif // TMC26X
  1946. // @section tmc_smart
  1947. /**
  1948. * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
  1949. * connect your SPI pins to the hardware SPI interface on your board and define
  1950. * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3
  1951. * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  1952. * You may also use software SPI if you wish to use general purpose IO pins.
  1953. *
  1954. * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN
  1955. * to the driver side PDN_UART pin with a 1K resistor.
  1956. * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without
  1957. * a resistor.
  1958. * The drivers can also be used with hardware serial.
  1959. *
  1960. * TMCStepper library is required to use TMC stepper drivers.
  1961. * https://github.com/teemuatlut/TMCStepper
  1962. */
  1963. #if HAS_TRINAMIC_CONFIG
  1964. #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
  1965. #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
  1966. #if AXIS_IS_TMC(X)
  1967. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
  1968. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
  1969. #define X_MICROSTEPS 16 // 0..256
  1970. #define X_RSENSE 0.11
  1971. #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ...
  1972. #endif
  1973. #if AXIS_IS_TMC(X2)
  1974. #define X2_CURRENT 800
  1975. #define X2_CURRENT_HOME X2_CURRENT
  1976. #define X2_MICROSTEPS 16
  1977. #define X2_RSENSE 0.11
  1978. #define X2_CHAIN_POS -1
  1979. #endif
  1980. #if AXIS_IS_TMC(Y)
  1981. #define Y_CURRENT 800
  1982. #define Y_CURRENT_HOME Y_CURRENT
  1983. #define Y_MICROSTEPS 16
  1984. #define Y_RSENSE 0.11
  1985. #define Y_CHAIN_POS -1
  1986. #endif
  1987. #if AXIS_IS_TMC(Y2)
  1988. #define Y2_CURRENT 800
  1989. #define Y2_CURRENT_HOME Y2_CURRENT
  1990. #define Y2_MICROSTEPS 16
  1991. #define Y2_RSENSE 0.11
  1992. #define Y2_CHAIN_POS -1
  1993. #endif
  1994. #if AXIS_IS_TMC(Z)
  1995. #define Z_CURRENT 800
  1996. #define Z_CURRENT_HOME Z_CURRENT
  1997. #define Z_MICROSTEPS 16
  1998. #define Z_RSENSE 0.11
  1999. #define Z_CHAIN_POS -1
  2000. #endif
  2001. #if AXIS_IS_TMC(Z2)
  2002. #define Z2_CURRENT 800
  2003. #define Z2_CURRENT_HOME Z2_CURRENT
  2004. #define Z2_MICROSTEPS 16
  2005. #define Z2_RSENSE 0.11
  2006. #define Z2_CHAIN_POS -1
  2007. #endif
  2008. #if AXIS_IS_TMC(Z3)
  2009. #define Z3_CURRENT 800
  2010. #define Z3_CURRENT_HOME Z3_CURRENT
  2011. #define Z3_MICROSTEPS 16
  2012. #define Z3_RSENSE 0.11
  2013. #define Z3_CHAIN_POS -1
  2014. #endif
  2015. #if AXIS_IS_TMC(Z4)
  2016. #define Z4_CURRENT 800
  2017. #define Z4_CURRENT_HOME Z4_CURRENT
  2018. #define Z4_MICROSTEPS 16
  2019. #define Z4_RSENSE 0.11
  2020. #define Z4_CHAIN_POS -1
  2021. #endif
  2022. #if AXIS_IS_TMC(E0)
  2023. #define E0_CURRENT 800
  2024. #define E0_MICROSTEPS 16
  2025. #define E0_RSENSE 0.11
  2026. #define E0_CHAIN_POS -1
  2027. #endif
  2028. #if AXIS_IS_TMC(E1)
  2029. #define E1_CURRENT 800
  2030. #define E1_MICROSTEPS 16
  2031. #define E1_RSENSE 0.11
  2032. #define E1_CHAIN_POS -1
  2033. #endif
  2034. #if AXIS_IS_TMC(E2)
  2035. #define E2_CURRENT 800
  2036. #define E2_MICROSTEPS 16
  2037. #define E2_RSENSE 0.11
  2038. #define E2_CHAIN_POS -1
  2039. #endif
  2040. #if AXIS_IS_TMC(E3)
  2041. #define E3_CURRENT 800
  2042. #define E3_MICROSTEPS 16
  2043. #define E3_RSENSE 0.11
  2044. #define E3_CHAIN_POS -1
  2045. #endif
  2046. #if AXIS_IS_TMC(E4)
  2047. #define E4_CURRENT 800
  2048. #define E4_MICROSTEPS 16
  2049. #define E4_RSENSE 0.11
  2050. #define E4_CHAIN_POS -1
  2051. #endif
  2052. #if AXIS_IS_TMC(E5)
  2053. #define E5_CURRENT 800
  2054. #define E5_MICROSTEPS 16
  2055. #define E5_RSENSE 0.11
  2056. #define E5_CHAIN_POS -1
  2057. #endif
  2058. #if AXIS_IS_TMC(E6)
  2059. #define E6_CURRENT 800
  2060. #define E6_MICROSTEPS 16
  2061. #define E6_RSENSE 0.11
  2062. #define E6_CHAIN_POS -1
  2063. #endif
  2064. #if AXIS_IS_TMC(E7)
  2065. #define E7_CURRENT 800
  2066. #define E7_MICROSTEPS 16
  2067. #define E7_RSENSE 0.11
  2068. #define E7_CHAIN_POS -1
  2069. #endif
  2070. /**
  2071. * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
  2072. * The default pins can be found in your board's pins file.
  2073. */
  2074. //#define X_CS_PIN -1
  2075. //#define Y_CS_PIN -1
  2076. //#define Z_CS_PIN -1
  2077. //#define X2_CS_PIN -1
  2078. //#define Y2_CS_PIN -1
  2079. //#define Z2_CS_PIN -1
  2080. //#define Z3_CS_PIN -1
  2081. //#define E0_CS_PIN -1
  2082. //#define E1_CS_PIN -1
  2083. //#define E2_CS_PIN -1
  2084. //#define E3_CS_PIN -1
  2085. //#define E4_CS_PIN -1
  2086. //#define E5_CS_PIN -1
  2087. //#define E6_CS_PIN -1
  2088. //#define E7_CS_PIN -1
  2089. /**
  2090. * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160).
  2091. * The default SW SPI pins are defined the respective pins files,
  2092. * but you can override or define them here.
  2093. */
  2094. //#define TMC_USE_SW_SPI
  2095. //#define TMC_SW_MOSI -1
  2096. //#define TMC_SW_MISO -1
  2097. //#define TMC_SW_SCK -1
  2098. /**
  2099. * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
  2100. * Set the address using jumpers on pins MS1 and MS2.
  2101. * Address | MS1 | MS2
  2102. * 0 | LOW | LOW
  2103. * 1 | HIGH | LOW
  2104. * 2 | LOW | HIGH
  2105. * 3 | HIGH | HIGH
  2106. *
  2107. * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
  2108. * on the same serial port, either here or in your board's pins file.
  2109. */
  2110. #define X_SLAVE_ADDRESS 0
  2111. #define Y_SLAVE_ADDRESS 0
  2112. #define Z_SLAVE_ADDRESS 0
  2113. #define X2_SLAVE_ADDRESS 0
  2114. #define Y2_SLAVE_ADDRESS 0
  2115. #define Z2_SLAVE_ADDRESS 0
  2116. #define Z3_SLAVE_ADDRESS 0
  2117. #define Z4_SLAVE_ADDRESS 0
  2118. #define E0_SLAVE_ADDRESS 0
  2119. #define E1_SLAVE_ADDRESS 0
  2120. #define E2_SLAVE_ADDRESS 0
  2121. #define E3_SLAVE_ADDRESS 0
  2122. #define E4_SLAVE_ADDRESS 0
  2123. #define E5_SLAVE_ADDRESS 0
  2124. #define E6_SLAVE_ADDRESS 0
  2125. #define E7_SLAVE_ADDRESS 0
  2126. /**
  2127. * Software enable
  2128. *
  2129. * Use for drivers that do not use a dedicated enable pin, but rather handle the same
  2130. * function through a communication line such as SPI or UART.
  2131. */
  2132. //#define SOFTWARE_DRIVER_ENABLE
  2133. /**
  2134. * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
  2135. * Use Trinamic's ultra quiet stepping mode.
  2136. * When disabled, Marlin will use spreadCycle stepping mode.
  2137. */
  2138. #define STEALTHCHOP_XY
  2139. #define STEALTHCHOP_Z
  2140. #define STEALTHCHOP_E
  2141. /**
  2142. * Optimize spreadCycle chopper parameters by using predefined parameter sets
  2143. * or with the help of an example included in the library.
  2144. * Provided parameter sets are
  2145. * CHOPPER_DEFAULT_12V
  2146. * CHOPPER_DEFAULT_19V
  2147. * CHOPPER_DEFAULT_24V
  2148. * CHOPPER_DEFAULT_36V
  2149. * CHOPPER_09STEP_24V // 0.9 degree steppers (24V)
  2150. * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
  2151. * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
  2152. *
  2153. * Define you own with
  2154. * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
  2155. */
  2156. #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
  2157. /**
  2158. * Monitor Trinamic drivers
  2159. * for error conditions like overtemperature and short to ground.
  2160. * To manage over-temp Marlin can decrease the driver current until the error condition clears.
  2161. * Other detected conditions can be used to stop the current print.
  2162. * Relevant G-codes:
  2163. * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
  2164. * M911 - Report stepper driver overtemperature pre-warn condition.
  2165. * M912 - Clear stepper driver overtemperature pre-warn condition flag.
  2166. * M122 - Report driver parameters (Requires TMC_DEBUG)
  2167. */
  2168. //#define MONITOR_DRIVER_STATUS
  2169. #if ENABLED(MONITOR_DRIVER_STATUS)
  2170. #define CURRENT_STEP_DOWN 50 // [mA]
  2171. #define REPORT_CURRENT_CHANGE
  2172. #define STOP_ON_ERROR
  2173. #endif
  2174. /**
  2175. * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
  2176. * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
  2177. * This mode allows for faster movements at the expense of higher noise levels.
  2178. * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
  2179. * M913 X/Y/Z/E to live tune the setting
  2180. */
  2181. //#define HYBRID_THRESHOLD
  2182. #define X_HYBRID_THRESHOLD 100 // [mm/s]
  2183. #define X2_HYBRID_THRESHOLD 100
  2184. #define Y_HYBRID_THRESHOLD 100
  2185. #define Y2_HYBRID_THRESHOLD 100
  2186. #define Z_HYBRID_THRESHOLD 3
  2187. #define Z2_HYBRID_THRESHOLD 3
  2188. #define Z3_HYBRID_THRESHOLD 3
  2189. #define Z4_HYBRID_THRESHOLD 3
  2190. #define E0_HYBRID_THRESHOLD 30
  2191. #define E1_HYBRID_THRESHOLD 30
  2192. #define E2_HYBRID_THRESHOLD 30
  2193. #define E3_HYBRID_THRESHOLD 30
  2194. #define E4_HYBRID_THRESHOLD 30
  2195. #define E5_HYBRID_THRESHOLD 30
  2196. #define E6_HYBRID_THRESHOLD 30
  2197. #define E7_HYBRID_THRESHOLD 30
  2198. /**
  2199. * Use StallGuard to home / probe X, Y, Z.
  2200. *
  2201. * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only
  2202. * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
  2203. * X, Y, and Z homing will always be done in spreadCycle mode.
  2204. *
  2205. * X/Y/Z_STALL_SENSITIVITY is the default stall threshold.
  2206. * Use M914 X Y Z to set the stall threshold at runtime:
  2207. *
  2208. * Sensitivity TMC2209 Others
  2209. * HIGHEST 255 -64 (Too sensitive => False positive)
  2210. * LOWEST 0 63 (Too insensitive => No trigger)
  2211. *
  2212. * It is recommended to set HOMING_BUMP_MM to { 0, 0, 0 }.
  2213. *
  2214. * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only ***
  2215. * Poll the driver through SPI to determine load when homing.
  2216. * Removes the need for a wire from DIAG1 to an endstop pin.
  2217. *
  2218. * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
  2219. * homing and adds a guard period for endstop triggering.
  2220. *
  2221. * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
  2222. */
  2223. //#define SENSORLESS_HOMING // StallGuard capable drivers only
  2224. #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
  2225. // TMC2209: 0...255. TMC2130: -64...63
  2226. #define X_STALL_SENSITIVITY 8
  2227. #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY
  2228. #define Y_STALL_SENSITIVITY 8
  2229. #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY
  2230. //#define Z_STALL_SENSITIVITY 8
  2231. //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY
  2232. //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY
  2233. //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY
  2234. //#define SPI_ENDSTOPS // TMC2130 only
  2235. //#define IMPROVE_HOMING_RELIABILITY
  2236. #endif
  2237. /**
  2238. * TMC Homing stepper phase.
  2239. *
  2240. * Improve homing repeatability by homing to stepper coil's nearest absolute
  2241. * phase position. Trinamic drivers use a stepper phase table with 1024 values
  2242. * spanning 4 full steps with 256 positions each (ergo, 1024 positions).
  2243. * Full step positions (128, 384, 640, 896) have the highest holding torque.
  2244. *
  2245. * Values from 0..1023, -1 to disable homing phase for that axis.
  2246. */
  2247. //#define TMC_HOME_PHASE { 896, 896, 896 }
  2248. /**
  2249. * Beta feature!
  2250. * Create a 50/50 square wave step pulse optimal for stepper drivers.
  2251. */
  2252. //#define SQUARE_WAVE_STEPPING
  2253. /**
  2254. * Enable M122 debugging command for TMC stepper drivers.
  2255. * M122 S0/1 will enable continous reporting.
  2256. */
  2257. //#define TMC_DEBUG
  2258. /**
  2259. * You can set your own advanced settings by filling in predefined functions.
  2260. * A list of available functions can be found on the library github page
  2261. * https://github.com/teemuatlut/TMCStepper
  2262. *
  2263. * Example:
  2264. * #define TMC_ADV() { \
  2265. * stepperX.diag0_otpw(1); \
  2266. * stepperY.intpol(0); \
  2267. * }
  2268. */
  2269. #define TMC_ADV() { }
  2270. #endif // HAS_TRINAMIC_CONFIG
  2271. // @section L64XX
  2272. /**
  2273. * L64XX Stepper Driver options
  2274. *
  2275. * Arduino-L6470 library (0.8.0 or higher) is required.
  2276. * https://github.com/ameyer/Arduino-L6470
  2277. *
  2278. * Requires the following to be defined in your pins_YOUR_BOARD file
  2279. * L6470_CHAIN_SCK_PIN
  2280. * L6470_CHAIN_MISO_PIN
  2281. * L6470_CHAIN_MOSI_PIN
  2282. * L6470_CHAIN_SS_PIN
  2283. * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset
  2284. */
  2285. #if HAS_L64XX
  2286. //#define L6470_CHITCHAT // Display additional status info
  2287. #if AXIS_IS_L64XX(X)
  2288. #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16
  2289. #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current
  2290. // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down
  2291. // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down
  2292. #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down)
  2293. // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down
  2294. // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down
  2295. // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current
  2296. #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474
  2297. #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI
  2298. #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest
  2299. #endif
  2300. #if AXIS_IS_L64XX(X2)
  2301. #define X2_MICROSTEPS 128
  2302. #define X2_OVERCURRENT 2000
  2303. #define X2_STALLCURRENT 1500
  2304. #define X2_MAX_VOLTAGE 127
  2305. #define X2_CHAIN_POS -1
  2306. #define X2_SLEW_RATE 1
  2307. #endif
  2308. #if AXIS_IS_L64XX(Y)
  2309. #define Y_MICROSTEPS 128
  2310. #define Y_OVERCURRENT 2000
  2311. #define Y_STALLCURRENT 1500
  2312. #define Y_MAX_VOLTAGE 127
  2313. #define Y_CHAIN_POS -1
  2314. #define Y_SLEW_RATE 1
  2315. #endif
  2316. #if AXIS_IS_L64XX(Y2)
  2317. #define Y2_MICROSTEPS 128
  2318. #define Y2_OVERCURRENT 2000
  2319. #define Y2_STALLCURRENT 1500
  2320. #define Y2_MAX_VOLTAGE 127
  2321. #define Y2_CHAIN_POS -1
  2322. #define Y2_SLEW_RATE 1
  2323. #endif
  2324. #if AXIS_IS_L64XX(Z)
  2325. #define Z_MICROSTEPS 128
  2326. #define Z_OVERCURRENT 2000
  2327. #define Z_STALLCURRENT 1500
  2328. #define Z_MAX_VOLTAGE 127
  2329. #define Z_CHAIN_POS -1
  2330. #define Z_SLEW_RATE 1
  2331. #endif
  2332. #if AXIS_IS_L64XX(Z2)
  2333. #define Z2_MICROSTEPS 128
  2334. #define Z2_OVERCURRENT 2000
  2335. #define Z2_STALLCURRENT 1500
  2336. #define Z2_MAX_VOLTAGE 127
  2337. #define Z2_CHAIN_POS -1
  2338. #define Z2_SLEW_RATE 1
  2339. #endif
  2340. #if AXIS_IS_L64XX(Z3)
  2341. #define Z3_MICROSTEPS 128
  2342. #define Z3_OVERCURRENT 2000
  2343. #define Z3_STALLCURRENT 1500
  2344. #define Z3_MAX_VOLTAGE 127
  2345. #define Z3_CHAIN_POS -1
  2346. #define Z3_SLEW_RATE 1
  2347. #endif
  2348. #if AXIS_IS_L64XX(Z4)
  2349. #define Z4_MICROSTEPS 128
  2350. #define Z4_OVERCURRENT 2000
  2351. #define Z4_STALLCURRENT 1500
  2352. #define Z4_MAX_VOLTAGE 127
  2353. #define Z4_CHAIN_POS -1
  2354. #define Z4_SLEW_RATE 1
  2355. #endif
  2356. #if AXIS_IS_L64XX(E0)
  2357. #define E0_MICROSTEPS 128
  2358. #define E0_OVERCURRENT 2000
  2359. #define E0_STALLCURRENT 1500
  2360. #define E0_MAX_VOLTAGE 127
  2361. #define E0_CHAIN_POS -1
  2362. #define E0_SLEW_RATE 1
  2363. #endif
  2364. #if AXIS_IS_L64XX(E1)
  2365. #define E1_MICROSTEPS 128
  2366. #define E1_OVERCURRENT 2000
  2367. #define E1_STALLCURRENT 1500
  2368. #define E1_MAX_VOLTAGE 127
  2369. #define E1_CHAIN_POS -1
  2370. #define E1_SLEW_RATE 1
  2371. #endif
  2372. #if AXIS_IS_L64XX(E2)
  2373. #define E2_MICROSTEPS 128
  2374. #define E2_OVERCURRENT 2000
  2375. #define E2_STALLCURRENT 1500
  2376. #define E2_MAX_VOLTAGE 127
  2377. #define E2_CHAIN_POS -1
  2378. #define E2_SLEW_RATE 1
  2379. #endif
  2380. #if AXIS_IS_L64XX(E3)
  2381. #define E3_MICROSTEPS 128
  2382. #define E3_OVERCURRENT 2000
  2383. #define E3_STALLCURRENT 1500
  2384. #define E3_MAX_VOLTAGE 127
  2385. #define E3_CHAIN_POS -1
  2386. #define E3_SLEW_RATE 1
  2387. #endif
  2388. #if AXIS_IS_L64XX(E4)
  2389. #define E4_MICROSTEPS 128
  2390. #define E4_OVERCURRENT 2000
  2391. #define E4_STALLCURRENT 1500
  2392. #define E4_MAX_VOLTAGE 127
  2393. #define E4_CHAIN_POS -1
  2394. #define E4_SLEW_RATE 1
  2395. #endif
  2396. #if AXIS_IS_L64XX(E5)
  2397. #define E5_MICROSTEPS 128
  2398. #define E5_OVERCURRENT 2000
  2399. #define E5_STALLCURRENT 1500
  2400. #define E5_MAX_VOLTAGE 127
  2401. #define E5_CHAIN_POS -1
  2402. #define E5_SLEW_RATE 1
  2403. #endif
  2404. #if AXIS_IS_L64XX(E6)
  2405. #define E6_MICROSTEPS 128
  2406. #define E6_OVERCURRENT 2000
  2407. #define E6_STALLCURRENT 1500
  2408. #define E6_MAX_VOLTAGE 127
  2409. #define E6_CHAIN_POS -1
  2410. #define E6_SLEW_RATE 1
  2411. #endif
  2412. #if AXIS_IS_L64XX(E7)
  2413. #define E7_MICROSTEPS 128
  2414. #define E7_OVERCURRENT 2000
  2415. #define E7_STALLCURRENT 1500
  2416. #define E7_MAX_VOLTAGE 127
  2417. #define E7_CHAIN_POS -1
  2418. #define E7_SLEW_RATE 1
  2419. #endif
  2420. /**
  2421. * Monitor L6470 drivers for error conditions like over temperature and over current.
  2422. * In the case of over temperature Marlin can decrease the drive until the error condition clears.
  2423. * Other detected conditions can be used to stop the current print.
  2424. * Relevant G-codes:
  2425. * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given.
  2426. * I not present or I0 or I1 - X, Y, Z or E0
  2427. * I2 - X2, Y2, Z2 or E1
  2428. * I3 - Z3 or E3
  2429. * I4 - Z4 or E4
  2430. * I5 - E5
  2431. * M916 - Increase drive level until get thermal warning
  2432. * M917 - Find minimum current thresholds
  2433. * M918 - Increase speed until max or error
  2434. * M122 S0/1 - Report driver parameters
  2435. */
  2436. //#define MONITOR_L6470_DRIVER_STATUS
  2437. #if ENABLED(MONITOR_L6470_DRIVER_STATUS)
  2438. #define KVAL_HOLD_STEP_DOWN 1
  2439. //#define L6470_STOP_ON_ERROR
  2440. #endif
  2441. #endif // HAS_L64XX
  2442. // @section i2cbus
  2443. //
  2444. // I2C Master ID for LPC176x LCD and Digital Current control
  2445. // Does not apply to other peripherals based on the Wire library.
  2446. //
  2447. //#define I2C_MASTER_ID 1 // Set a value from 0 to 2
  2448. /**
  2449. * TWI/I2C BUS
  2450. *
  2451. * This feature is an EXPERIMENTAL feature so it shall not be used on production
  2452. * machines. Enabling this will allow you to send and receive I2C data from slave
  2453. * devices on the bus.
  2454. *
  2455. * ; Example #1
  2456. * ; This macro send the string "Marlin" to the slave device with address 0x63 (99)
  2457. * ; It uses multiple M260 commands with one B<base 10> arg
  2458. * M260 A99 ; Target slave address
  2459. * M260 B77 ; M
  2460. * M260 B97 ; a
  2461. * M260 B114 ; r
  2462. * M260 B108 ; l
  2463. * M260 B105 ; i
  2464. * M260 B110 ; n
  2465. * M260 S1 ; Send the current buffer
  2466. *
  2467. * ; Example #2
  2468. * ; Request 6 bytes from slave device with address 0x63 (99)
  2469. * M261 A99 B5
  2470. *
  2471. * ; Example #3
  2472. * ; Example serial output of a M261 request
  2473. * echo:i2c-reply: from:99 bytes:5 data:hello
  2474. */
  2475. //#define EXPERIMENTAL_I2CBUS
  2476. #if ENABLED(EXPERIMENTAL_I2CBUS)
  2477. #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
  2478. #endif
  2479. // @section extras
  2480. /**
  2481. * Photo G-code
  2482. * Add the M240 G-code to take a photo.
  2483. * The photo can be triggered by a digital pin or a physical movement.
  2484. */
  2485. //#define PHOTO_GCODE
  2486. #if ENABLED(PHOTO_GCODE)
  2487. // A position to move to (and raise Z) before taking the photo
  2488. //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z)
  2489. //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P)
  2490. //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S)
  2491. // Canon RC-1 or homebrew digital camera trigger
  2492. // Data from: https://www.doc-diy.net/photo/rc-1_hacked/
  2493. //#define PHOTOGRAPH_PIN 23
  2494. // Canon Hack Development Kit
  2495. // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/
  2496. //#define CHDK_PIN 4
  2497. // Optional second move with delay to trigger the camera shutter
  2498. //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J)
  2499. // Duration to hold the switch or keep CHDK_PIN high
  2500. //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D)
  2501. /**
  2502. * PHOTO_PULSES_US may need adjustment depending on board and camera model.
  2503. * Pin must be running at 48.4kHz.
  2504. * Be sure to use a PHOTOGRAPH_PIN which can rise and fall quick enough.
  2505. * (e.g., MKS SBase temp sensor pin was too slow, so used P1.23 on J8.)
  2506. *
  2507. * Example pulse data for Nikon: https://bit.ly/2FKD0Aq
  2508. * IR Wiring: https://git.io/JvJf7
  2509. */
  2510. //#define PHOTO_PULSES_US { 2000, 27850, 400, 1580, 400, 3580, 400 } // (µs) Durations for each 48.4kHz oscillation
  2511. #ifdef PHOTO_PULSES_US
  2512. #define PHOTO_PULSE_DELAY_US 13 // (µs) Approximate duration of each HIGH and LOW pulse in the oscillation
  2513. #endif
  2514. #endif
  2515. /**
  2516. * Spindle & Laser control
  2517. *
  2518. * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
  2519. * to set spindle speed, spindle direction, and laser power.
  2520. *
  2521. * SuperPid is a router/spindle speed controller used in the CNC milling community.
  2522. * Marlin can be used to turn the spindle on and off. It can also be used to set
  2523. * the spindle speed from 5,000 to 30,000 RPM.
  2524. *
  2525. * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V
  2526. * hardware PWM pin for the speed control and a pin for the rotation direction.
  2527. *
  2528. * See https://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
  2529. */
  2530. //#define SPINDLE_FEATURE
  2531. //#define LASER_FEATURE
  2532. #if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
  2533. #define SPINDLE_LASER_ACTIVE_STATE LOW // Set to "HIGH" if the on/off function is active HIGH
  2534. #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
  2535. #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
  2536. #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
  2537. /**
  2538. * Speed / Power can be set ('M3 S') and displayed in terms of:
  2539. * - PWM255 (S0 - S255)
  2540. * - PERCENT (S0 - S100)
  2541. * - RPM (S0 - S50000) Best for use with a spindle
  2542. */
  2543. #define CUTTER_POWER_UNIT PWM255
  2544. /**
  2545. * Relative Cutter Power
  2546. * Normally, 'M3 O<power>' sets
  2547. * OCR power is relative to the range SPEED_POWER_MIN...SPEED_POWER_MAX.
  2548. * so input powers of 0...255 correspond to SPEED_POWER_MIN...SPEED_POWER_MAX
  2549. * instead of normal range (0 to SPEED_POWER_MAX).
  2550. * Best used with (e.g.) SuperPID router controller: S0 = 5,000 RPM and S255 = 30,000 RPM
  2551. */
  2552. //#define CUTTER_POWER_RELATIVE // Set speed proportional to [SPEED_POWER_MIN...SPEED_POWER_MAX]
  2553. #if ENABLED(SPINDLE_FEATURE)
  2554. //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
  2555. #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
  2556. #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
  2557. #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
  2558. #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
  2559. /**
  2560. * M3/M4 Power Equation
  2561. *
  2562. * Each tool uses different value ranges for speed / power control.
  2563. * These parameters are used to convert between tool power units and PWM.
  2564. *
  2565. * Speed/Power = (PWMDC / 255 * 100 - SPEED_POWER_INTERCEPT) / SPEED_POWER_SLOPE
  2566. * PWMDC = (spdpwr - SPEED_POWER_MIN) / (SPEED_POWER_MAX - SPEED_POWER_MIN) / SPEED_POWER_SLOPE
  2567. */
  2568. #define SPEED_POWER_INTERCEPT 0 // (%) 0-100 i.e., Minimum power percentage
  2569. #define SPEED_POWER_MIN 5000 // (RPM)
  2570. #define SPEED_POWER_MAX 30000 // (RPM) SuperPID router controller 0 - 30,000 RPM
  2571. #define SPEED_POWER_STARTUP 25000 // (RPM) M3/M4 speed/power default (with no arguments)
  2572. #else
  2573. #define SPEED_POWER_INTERCEPT 0 // (%) 0-100 i.e., Minimum power percentage
  2574. #define SPEED_POWER_MIN 0 // (%) 0-100
  2575. #define SPEED_POWER_MAX 100 // (%) 0-100
  2576. #define SPEED_POWER_STARTUP 80 // (%) M3/M4 speed/power default (with no arguments)
  2577. /**
  2578. * Enable inline laser power to be handled in the planner / stepper routines.
  2579. * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)
  2580. * or by the 'S' parameter in G0/G1/G2/G3 moves (see LASER_MOVE_POWER).
  2581. *
  2582. * This allows the laser to keep in perfect sync with the planner and removes
  2583. * the powerup/down delay since lasers require negligible time.
  2584. */
  2585. #define LASER_POWER_INLINE
  2586. #if ENABLED(LASER_POWER_INLINE)
  2587. /**
  2588. * Scale the laser's power in proportion to the movement rate.
  2589. *
  2590. * - Sets the entry power proportional to the entry speed over the nominal speed.
  2591. * - Ramps the power up every N steps to approximate the speed trapezoid.
  2592. * - Due to the limited power resolution this is only approximate.
  2593. */
  2594. #define LASER_POWER_INLINE_TRAPEZOID
  2595. /**
  2596. * Continuously calculate the current power (nominal_power * current_rate / nominal_rate).
  2597. * Required for accurate power with non-trapezoidal acceleration (e.g., S_CURVE_ACCELERATION).
  2598. * This is a costly calculation so this option is discouraged on 8-bit AVR boards.
  2599. *
  2600. * LASER_POWER_INLINE_TRAPEZOID_CONT_PER defines how many step cycles there are between power updates. If your
  2601. * board isn't able to generate steps fast enough (and you are using LASER_POWER_INLINE_TRAPEZOID_CONT), increase this.
  2602. * Note that when this is zero it means it occurs every cycle; 1 means a delay wait one cycle then run, etc.
  2603. */
  2604. //#define LASER_POWER_INLINE_TRAPEZOID_CONT
  2605. /**
  2606. * Stepper iterations between power updates. Increase this value if the board
  2607. * can't keep up with the processing demands of LASER_POWER_INLINE_TRAPEZOID_CONT.
  2608. * Disable (or set to 0) to recalculate power on every stepper iteration.
  2609. */
  2610. //#define LASER_POWER_INLINE_TRAPEZOID_CONT_PER 10
  2611. /**
  2612. * Include laser power in G0/G1/G2/G3/G5 commands with the 'S' parameter
  2613. */
  2614. //#define LASER_MOVE_POWER
  2615. #if ENABLED(LASER_MOVE_POWER)
  2616. // Turn off the laser on G0 moves with no power parameter.
  2617. // If a power parameter is provided, use that instead.
  2618. //#define LASER_MOVE_G0_OFF
  2619. // Turn off the laser on G28 homing.
  2620. //#define LASER_MOVE_G28_OFF
  2621. #endif
  2622. /**
  2623. * Inline flag inverted
  2624. *
  2625. * WARNING: M5 will NOT turn off the laser unless another move
  2626. * is done (so G-code files must end with 'M5 I').
  2627. */
  2628. //#define LASER_POWER_INLINE_INVERT
  2629. /**
  2630. * Continuously apply inline power. ('M3 S3' == 'G1 S3' == 'M3 S3 I')
  2631. *
  2632. * The laser might do some weird things, so only enable this
  2633. * feature if you understand the implications.
  2634. */
  2635. //#define LASER_POWER_INLINE_CONTINUOUS
  2636. #else
  2637. #define SPINDLE_LASER_POWERUP_DELAY 50 // (ms) Delay to allow the spindle/laser to come up to speed/power
  2638. #define SPINDLE_LASER_POWERDOWN_DELAY 50 // (ms) Delay to allow the spindle to stop
  2639. #endif
  2640. #endif
  2641. #endif
  2642. /**
  2643. * Coolant Control
  2644. *
  2645. * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
  2646. *
  2647. * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
  2648. */
  2649. //#define COOLANT_CONTROL
  2650. #if ENABLED(COOLANT_CONTROL)
  2651. #define COOLANT_MIST // Enable if mist coolant is present
  2652. #define COOLANT_FLOOD // Enable if flood coolant is present
  2653. #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
  2654. #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
  2655. #endif
  2656. /**
  2657. * Filament Width Sensor
  2658. *
  2659. * Measures the filament width in real-time and adjusts
  2660. * flow rate to compensate for any irregularities.
  2661. *
  2662. * Also allows the measured filament diameter to set the
  2663. * extrusion rate, so the slicer only has to specify the
  2664. * volume.
  2665. *
  2666. * Only a single extruder is supported at this time.
  2667. *
  2668. * 34 RAMPS_14 : Analog input 5 on the AUX2 connector
  2669. * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E)
  2670. * 301 RAMBO : Analog input 3
  2671. *
  2672. * Note: May require analog pins to be defined for other boards.
  2673. */
  2674. //#define FILAMENT_WIDTH_SENSOR
  2675. #if ENABLED(FILAMENT_WIDTH_SENSOR)
  2676. #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
  2677. #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
  2678. #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it
  2679. #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
  2680. #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially
  2681. // Display filament width on the LCD status line. Status messages will expire after 5 seconds.
  2682. //#define FILAMENT_LCD_DISPLAY
  2683. #endif
  2684. /**
  2685. * Power Monitor
  2686. * Monitor voltage (V) and/or current (A), and -when possible- power (W)
  2687. *
  2688. * Read and configure with M430
  2689. *
  2690. * The current sensor feeds DC voltage (relative to the measured current) to an analog pin
  2691. * The voltage sensor feeds DC voltage (relative to the measured voltage) to an analog pin
  2692. */
  2693. //#define POWER_MONITOR_CURRENT // Monitor the system current
  2694. //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage
  2695. #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE)
  2696. #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF!
  2697. #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output
  2698. #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF!
  2699. #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display)
  2700. #endif
  2701. /**
  2702. * CNC Coordinate Systems
  2703. *
  2704. * Enables G53 and G54-G59.3 commands to select coordinate systems
  2705. * and G92.1 to reset the workspace to native machine space.
  2706. */
  2707. //#define CNC_COORDINATE_SYSTEMS
  2708. /**
  2709. * Auto-report temperatures with M155 S<seconds>
  2710. */
  2711. #define AUTO_REPORT_TEMPERATURES
  2712. /**
  2713. * Include capabilities in M115 output
  2714. */
  2715. #define EXTENDED_CAPABILITIES_REPORT
  2716. #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
  2717. //#define M115_GEOMETRY_REPORT
  2718. #endif
  2719. /**
  2720. * Expected Printer Check
  2721. * Add the M16 G-code to compare a string to the MACHINE_NAME.
  2722. * M16 with a non-matching string causes the printer to halt.
  2723. */
  2724. //#define EXPECTED_PRINTER_CHECK
  2725. /**
  2726. * Disable all Volumetric extrusion options
  2727. */
  2728. //#define NO_VOLUMETRICS
  2729. #if DISABLED(NO_VOLUMETRICS)
  2730. /**
  2731. * Volumetric extrusion default state
  2732. * Activate to make volumetric extrusion the default method,
  2733. * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  2734. *
  2735. * M200 D0 to disable, M200 Dn to set a new diameter (and enable volumetric).
  2736. * M200 S0/S1 to disable/enable volumetric extrusion.
  2737. */
  2738. //#define VOLUMETRIC_DEFAULT_ON
  2739. //#define VOLUMETRIC_EXTRUDER_LIMIT
  2740. #if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
  2741. /**
  2742. * Default volumetric extrusion limit in cubic mm per second (mm^3/sec).
  2743. * This factory setting applies to all extruders.
  2744. * Use 'M200 [T<extruder>] L<limit>' to override and 'M502' to reset.
  2745. * A non-zero value activates Volume-based Extrusion Limiting.
  2746. */
  2747. #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT 0.00 // (mm^3/sec)
  2748. #endif
  2749. #endif
  2750. /**
  2751. * Enable this option for a leaner build of Marlin that removes all
  2752. * workspace offsets, simplifying coordinate transformations, leveling, etc.
  2753. *
  2754. * - M206 and M428 are disabled.
  2755. * - G92 will revert to its behavior from Marlin 1.0.
  2756. */
  2757. //#define NO_WORKSPACE_OFFSETS
  2758. // Extra options for the M114 "Current Position" report
  2759. //#define M114_DETAIL // Use 'M114` for details to check planner calculations
  2760. //#define M114_REALTIME // Real current position based on forward kinematics
  2761. //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed.
  2762. //#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
  2763. /**
  2764. * Set the number of proportional font spaces required to fill up a typical character space.
  2765. * This can help to better align the output of commands like `G29 O` Mesh Output.
  2766. *
  2767. * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
  2768. * Otherwise, adjust according to your client and font.
  2769. */
  2770. #define PROPORTIONAL_FONT_RATIO 1.0
  2771. /**
  2772. * Spend 28 bytes of SRAM to optimize the GCode parser
  2773. */
  2774. #define FASTER_GCODE_PARSER
  2775. #if ENABLED(FASTER_GCODE_PARSER)
  2776. //#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
  2777. #endif
  2778. //#define GCODE_CASE_INSENSITIVE // Accept G-code sent to the firmware in lowercase
  2779. //#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
  2780. /**
  2781. * CNC G-code options
  2782. * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
  2783. * Note that G0 feedrates should be used with care for 3D printing (if used at all).
  2784. * High feedrates may cause ringing and harm print quality.
  2785. */
  2786. //#define PAREN_COMMENTS // Support for parentheses-delimited comments
  2787. //#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
  2788. // Enable and set a (default) feedrate for all G0 moves
  2789. //#define G0_FEEDRATE 3000 // (mm/min)
  2790. #ifdef G0_FEEDRATE
  2791. //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
  2792. #endif
  2793. /**
  2794. * Startup commands
  2795. *
  2796. * Execute certain G-code commands immediately after power-on.
  2797. */
  2798. //#define STARTUP_COMMANDS "M17 Z"
  2799. /**
  2800. * G-code Macros
  2801. *
  2802. * Add G-codes M810-M819 to define and run G-code macros.
  2803. * Macros are not saved to EEPROM.
  2804. */
  2805. //#define GCODE_MACROS
  2806. #if ENABLED(GCODE_MACROS)
  2807. #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used
  2808. #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
  2809. #endif
  2810. /**
  2811. * User-defined menu items that execute custom GCode
  2812. */
  2813. //#define CUSTOM_USER_MENUS
  2814. #if ENABLED(CUSTOM_USER_MENUS)
  2815. //#define CUSTOM_USER_MENU_TITLE "Custom Commands"
  2816. #define USER_SCRIPT_DONE "M117 User Script Done"
  2817. #define USER_SCRIPT_AUDIBLE_FEEDBACK
  2818. //#define USER_SCRIPT_RETURN // Return to status screen after a script
  2819. #define USER_DESC_1 "Home & UBL Info"
  2820. #define USER_GCODE_1 "G28\nG29 W"
  2821. #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
  2822. #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
  2823. #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
  2824. #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
  2825. #define USER_DESC_4 "Heat Bed/Home/Level"
  2826. #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
  2827. #define USER_DESC_5 "Home & Info"
  2828. #define USER_GCODE_5 "G28\nM503"
  2829. #endif
  2830. /**
  2831. * Host Action Commands
  2832. *
  2833. * Define host streamer action commands in compliance with the standard.
  2834. *
  2835. * See https://reprap.org/wiki/G-code#Action_commands
  2836. * Common commands ........ poweroff, pause, paused, resume, resumed, cancel
  2837. * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
  2838. *
  2839. * Some features add reason codes to extend these commands.
  2840. *
  2841. * Host Prompt Support enables Marlin to use the host for user prompts so
  2842. * filament runout and other processes can be managed from the host side.
  2843. */
  2844. //#define HOST_ACTION_COMMANDS
  2845. #if ENABLED(HOST_ACTION_COMMANDS)
  2846. //#define HOST_PROMPT_SUPPORT
  2847. //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
  2848. #endif
  2849. /**
  2850. * Cancel Objects
  2851. *
  2852. * Implement M486 to allow Marlin to skip objects
  2853. */
  2854. //#define CANCEL_OBJECTS
  2855. /**
  2856. * I2C position encoders for closed loop control.
  2857. * Developed by Chris Barr at Aus3D.
  2858. *
  2859. * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder
  2860. * Github: https://github.com/Aus3D/MagneticEncoder
  2861. *
  2862. * Supplier: https://aus3d.com.au/magnetic-encoder-module
  2863. * Alternative Supplier: https://reliabuild3d.com/
  2864. *
  2865. * Reliabuild encoders have been modified to improve reliability.
  2866. */
  2867. //#define I2C_POSITION_ENCODERS
  2868. #if ENABLED(I2C_POSITION_ENCODERS)
  2869. #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5
  2870. // encoders supported currently.
  2871. #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200.
  2872. #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. <X|Y|Z|E>_AXIS.
  2873. #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or-
  2874. // I2CPE_ENC_TYPE_ROTARY.
  2875. #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for
  2876. // 1mm poles. For linear encoders this is ticks / mm,
  2877. // for rotary encoders this is ticks / revolution.
  2878. //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
  2879. // steps per full revolution (motor steps/rev * microstepping)
  2880. //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
  2881. #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
  2882. #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
  2883. // printer will attempt to correct the error; errors
  2884. // smaller than this are ignored to minimize effects of
  2885. // measurement noise / latency (filter).
  2886. #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2.
  2887. #define I2CPE_ENC_2_AXIS Y_AXIS
  2888. #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR
  2889. #define I2CPE_ENC_2_TICKS_UNIT 2048
  2890. //#define I2CPE_ENC_2_TICKS_REV (16 * 200)
  2891. //#define I2CPE_ENC_2_INVERT
  2892. #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP
  2893. #define I2CPE_ENC_2_EC_THRESH 0.10
  2894. #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options
  2895. #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below.
  2896. #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4.
  2897. #define I2CPE_ENC_4_AXIS E_AXIS
  2898. #define I2CPE_ENC_5_ADDR 34 // Encoder 5.
  2899. #define I2CPE_ENC_5_AXIS E_AXIS
  2900. // Default settings for encoders which are enabled, but without settings configured above.
  2901. #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR
  2902. #define I2CPE_DEF_ENC_TICKS_UNIT 2048
  2903. #define I2CPE_DEF_TICKS_REV (16 * 200)
  2904. #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE
  2905. #define I2CPE_DEF_EC_THRESH 0.1
  2906. //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
  2907. // axis after which the printer will abort. Comment out to
  2908. // disable abort behavior.
  2909. #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
  2910. // for this amount of time (in ms) before the encoder
  2911. // is trusted again.
  2912. /**
  2913. * Position is checked every time a new command is executed from the buffer but during long moves,
  2914. * this setting determines the minimum update time between checks. A value of 100 works well with
  2915. * error rolling average when attempting to correct only for skips and not for vibration.
  2916. */
  2917. #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks.
  2918. // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
  2919. #define I2CPE_ERR_ROLLING_AVERAGE
  2920. #endif // I2C_POSITION_ENCODERS
  2921. /**
  2922. * Analog Joystick(s)
  2923. */
  2924. //#define JOYSTICK
  2925. #if ENABLED(JOYSTICK)
  2926. #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2
  2927. #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2
  2928. #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
  2929. #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
  2930. //#define INVERT_JOY_X // Enable if X direction is reversed
  2931. //#define INVERT_JOY_Y // Enable if Y direction is reversed
  2932. //#define INVERT_JOY_Z // Enable if Z direction is reversed
  2933. // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
  2934. #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
  2935. #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
  2936. #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }
  2937. //#define JOYSTICK_DEBUG
  2938. #endif
  2939. /**
  2940. * Mechanical Gantry Calibration
  2941. * Modern replacement for the Prusa TMC_Z_CALIBRATION.
  2942. * Adds capability to work with any adjustable current drivers.
  2943. * Implemented as G34 because M915 is deprecated.
  2944. */
  2945. //#define MECHANICAL_GANTRY_CALIBRATION
  2946. #if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
  2947. #define GANTRY_CALIBRATION_CURRENT 600 // Default calibration current in ma
  2948. #define GANTRY_CALIBRATION_EXTRA_HEIGHT 15 // Extra distance in mm past Z_###_POS to move
  2949. #define GANTRY_CALIBRATION_FEEDRATE 500 // Feedrate for correction move
  2950. //#define GANTRY_CALIBRATION_TO_MIN // Enable to calibrate Z in the MIN direction
  2951. //#define GANTRY_CALIBRATION_SAFE_POSITION { X_CENTER, Y_CENTER } // Safe position for nozzle
  2952. //#define GANTRY_CALIBRATION_XY_PARK_FEEDRATE 3000 // XY Park Feedrate - MMM
  2953. //#define GANTRY_CALIBRATION_COMMANDS_PRE ""
  2954. #define GANTRY_CALIBRATION_COMMANDS_POST "G28" // G28 highly recommended to ensure an accurate position
  2955. #endif
  2956. /**
  2957. * MAX7219 Debug Matrix
  2958. *
  2959. * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
  2960. * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  2961. */
  2962. //#define MAX7219_DEBUG
  2963. #if ENABLED(MAX7219_DEBUG)
  2964. #define MAX7219_CLK_PIN 64
  2965. #define MAX7219_DIN_PIN 57
  2966. #define MAX7219_LOAD_PIN 44
  2967. //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
  2968. #define MAX7219_INIT_TEST 2 // Test pattern at startup: 0=none, 1=sweep, 2=spiral
  2969. #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain.
  2970. #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
  2971. // connector at: right=0 bottom=-90 top=90 left=180
  2972. //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order
  2973. //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side
  2974. /**
  2975. * Sample debug features
  2976. * If you add more debug displays, be careful to avoid conflicts!
  2977. */
  2978. #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
  2979. #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row
  2980. #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row
  2981. #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row
  2982. // If you experience stuttering, reboots, etc. this option can reveal how
  2983. // tweaks made to the configuration are affecting the printer in real-time.
  2984. #endif
  2985. /**
  2986. * NanoDLP Sync support
  2987. *
  2988. * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  2989. * string to enable synchronization with DLP projector exposure. This change will allow to use
  2990. * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  2991. */
  2992. //#define NANODLP_Z_SYNC
  2993. #if ENABLED(NANODLP_Z_SYNC)
  2994. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
  2995. // Default behavior is limited to Z axis only.
  2996. #endif
  2997. /**
  2998. * WiFi Support (Espressif ESP32 WiFi)
  2999. */
  3000. //#define WIFISUPPORT // Marlin embedded WiFi managenent
  3001. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib)
  3002. #if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
  3003. //#define WEBSUPPORT // Start a webserver (which may include auto-discovery)
  3004. //#define OTASUPPORT // Support over-the-air firmware updates
  3005. //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
  3006. /**
  3007. * To set a default WiFi SSID / Password, create a file called Configuration_Secure.h with
  3008. * the following defines, customized for your network. This specific file is excluded via
  3009. * .gitignore to prevent it from accidentally leaking to the public.
  3010. *
  3011. * #define WIFI_SSID "WiFi SSID"
  3012. * #define WIFI_PWD "WiFi Password"
  3013. */
  3014. //#include "Configuration_Secure.h" // External file with WiFi SSID / Password
  3015. #endif
  3016. /**
  3017. * Průša Multi-Material Unit v2
  3018. * Enable in Configuration.h
  3019. */
  3020. #if ENABLED(PRUSA_MMU2)
  3021. // Serial port used for communication with MMU2.
  3022. // For AVR enable the UART port used for the MMU. (e.g., mmuSerial)
  3023. // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2)
  3024. #define MMU2_SERIAL_PORT 2
  3025. #define MMU2_SERIAL mmuSerial
  3026. // Use hardware reset for MMU if a pin is defined for it
  3027. //#define MMU2_RST_PIN 23
  3028. // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up)
  3029. //#define MMU2_MODE_12V
  3030. // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout
  3031. #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"
  3032. // Add an LCD menu for MMU2
  3033. //#define MMU2_MENUS
  3034. #if ENABLED(MMU2_MENUS)
  3035. // Settings for filament load / unload from the LCD menu.
  3036. // This is for Průša MK3-style extruders. Customize for your hardware.
  3037. #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
  3038. #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
  3039. { 7.2, 1145 }, \
  3040. { 14.4, 871 }, \
  3041. { 36.0, 1393 }, \
  3042. { 14.4, 871 }, \
  3043. { 50.0, 198 }
  3044. #define MMU2_RAMMING_SEQUENCE \
  3045. { 1.0, 1000 }, \
  3046. { 1.0, 1500 }, \
  3047. { 2.0, 2000 }, \
  3048. { 1.5, 3000 }, \
  3049. { 2.5, 4000 }, \
  3050. { -15.0, 5000 }, \
  3051. { -14.0, 1200 }, \
  3052. { -6.0, 600 }, \
  3053. { 10.0, 700 }, \
  3054. { -10.0, 400 }, \
  3055. { -50.0, 2000 }
  3056. #endif
  3057. /**
  3058. * MMU Extruder Sensor
  3059. *
  3060. * Support for a Průša (or other) IR Sensor to detect filament near the extruder
  3061. * and make loading more reliable. Suitable for an extruder equipped with a filament
  3062. * sensor less than 38mm from the gears.
  3063. *
  3064. * During loading the extruder will stop when the sensor is triggered, then do a last
  3065. * move up to the gears. If no filament is detected, the MMU2 can make some more attempts.
  3066. * If all attempts fail, a filament runout will be triggered.
  3067. */
  3068. //#define MMU_EXTRUDER_SENSOR
  3069. #if ENABLED(MMU_EXTRUDER_SENSOR)
  3070. #define MMU_LOADING_ATTEMPTS_NR 5 // max. number of attempts to load filament if first load fail
  3071. #endif
  3072. /**
  3073. * Using a sensor like the MMU2S
  3074. * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S.
  3075. * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11
  3076. */
  3077. //#define PRUSA_MMU2_S_MODE
  3078. #if ENABLED(PRUSA_MMU2_S_MODE)
  3079. #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries)
  3080. #define MMU2_CAN_LOAD_FEEDRATE 800 // (mm/min)
  3081. #define MMU2_CAN_LOAD_SEQUENCE \
  3082. { 0.1, MMU2_CAN_LOAD_FEEDRATE }, \
  3083. { 60.0, MMU2_CAN_LOAD_FEEDRATE }, \
  3084. { -52.0, MMU2_CAN_LOAD_FEEDRATE }
  3085. #define MMU2_CAN_LOAD_RETRACT 6.0 // (mm) Keep under the distance between Load Sequence values
  3086. #define MMU2_CAN_LOAD_DEVIATION 0.8 // (mm) Acceptable deviation
  3087. #define MMU2_CAN_LOAD_INCREMENT 0.2 // (mm) To reuse within MMU2 module
  3088. #define MMU2_CAN_LOAD_INCREMENT_SEQUENCE \
  3089. { -MMU2_CAN_LOAD_INCREMENT, MMU2_CAN_LOAD_FEEDRATE }
  3090. #endif
  3091. //#define MMU2_DEBUG // Write debug info to serial output
  3092. #endif // PRUSA_MMU2
  3093. /**
  3094. * Advanced Print Counter settings
  3095. */
  3096. #if ENABLED(PRINTCOUNTER)
  3097. #define SERVICE_WARNING_BUZZES 3
  3098. // Activate up to 3 service interval watchdogs
  3099. //#define SERVICE_NAME_1 "Service S"
  3100. //#define SERVICE_INTERVAL_1 100 // print hours
  3101. //#define SERVICE_NAME_2 "Service L"
  3102. //#define SERVICE_INTERVAL_2 200 // print hours
  3103. //#define SERVICE_NAME_3 "Service 3"
  3104. //#define SERVICE_INTERVAL_3 1 // print hours
  3105. #endif
  3106. // @section develop
  3107. //
  3108. // M100 Free Memory Watcher to debug memory usage
  3109. //
  3110. //#define M100_FREE_MEMORY_WATCHER
  3111. //
  3112. // M42 - Set pin states
  3113. //
  3114. //#define DIRECT_PIN_CONTROL
  3115. //
  3116. // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
  3117. //
  3118. //#define PINS_DEBUGGING
  3119. // Enable Marlin dev mode which adds some special commands
  3120. //#define MARLIN_DEV_MODE