123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /****************************************************************************************
- * Teensy 4.1 (IMXRT1062) Breadboard pin assignments
- * Requires the Teensyduino software with Teensy 4.1 selected in Arduino IDE!
- * https://www.pjrc.com/teensy/teensyduino.html
- ****************************************************************************************/
-
- #if !IS_32BIT_TEENSY || !IS_TEENSY41
- #error "Oops! Select 'Teensy 4.1' in 'Tools > Board.'"
- #else
- #define BOARD_INFO_NAME "Teensy4.1"
- #endif
-
- #define AT90USB 1286 // Disable MarlinSerial etc.
- #define USBCON //1286 // Disable MarlinSerial etc.
- /*
-
- plan for Teensy4.0 and Teensy4.1:
- USB
- GND |-----#####-----| VIN (3.65 TO 5.5V)
- RX1 CS1 RX1 PWM 0 | ##### | GND
- TX1 MISO1 TX1 PWM 1 | | 3.3V
- STPX PWM 2 | | 23 A9 PWM
- DIRX PWM 3 | | 22 A8 PWM LIMZ
- STPY PWM 4 | | 21 A7 RX5 LIMY
- DIRY PWM 5 | | 20 A6 TX5 LIMX
- STPZ PWM 6 | | 19 A5 PWM SCL0 COOL
- DIRZ RX2 PWM 7 | | 18 A4 PWM SDA0 MIST
- STPA TX2 PWM 8 | | 17 A3 RX4 SDA1 CYST
- DIRA PWM 9 | | 16 A2 TX4 SCL1 EHOLD
- STEN PWM 10 | | 15 A1 PWM RX3 PRB
- SPDI MOSI0 PWM 11 | | 14 A0 PWM TX3 PANIC
- SPEN MISO0 PWM 12 | | 13 LED PWM SCK0 SPWM
- 3.3V | | GND
- SCL PWM 24 | | 41 A17 KPSTR
- SDA PWM 25 | | 40 A16 STENY
- STPB MOSI1 26 | | 39 A15 MISO1 STENZ
- DIRB SCK1 27 | * * * * * | 38 A14 STENA
- LIMB RX7 PWM 28 | | 37 PWM STENB
- DOOR TX7 PWM 29 | | 36 PWM ST0
- ST1 30 | | 35 TX8 ST3
- AUX0 31 | SDCARD | 34 RX8 ST2
- AUX1 32 |_______________| 33 PWM AUX2
-
-
- */
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 20
- #define Y_STOP_PIN 21
- #define Z_STOP_PIN 22
-
- //
- // Steppers
- //
- #define X_STEP_PIN 2
- #define X_DIR_PIN 3
- #define X_ENABLE_PIN 10
- //#define X_CS_PIN 30
-
- #define Y_STEP_PIN 4
- #define Y_DIR_PIN 5
- #define Y_ENABLE_PIN 40
- //#define Y_CS_PIN 31
-
- #define Z_STEP_PIN 6
- #define Z_DIR_PIN 7
- #define Z_ENABLE_PIN 39
- //#define Z_CS_PIN 32
-
- #define E0_STEP_PIN 8
- #define E0_DIR_PIN 9
- #define E0_ENABLE_PIN 38
-
- #define E1_STEP_PIN 26
- #define E1_DIR_PIN 27
- #define E1_ENABLE_PIN 37
-
- #define HEATER_0_PIN 31
- #define HEATER_1_PIN 32
- #define HEATER_BED_PIN 33
-
- #define TEMP_0_PIN 5 // Extruder / Analog pin numbering: 2 => A2
- #define TEMP_1_PIN 4
- #define TEMP_BED_PIN 15 // Bed / Analog pin numbering
-
- #define LED_PIN 13
-
- #define SOL0_PIN 17
- #define SERVO0_PIN 24
- #define SERVO1_PIN 25
-
- #ifndef SDCARD_CONNECTION
- #define SDCARD_CONNECTION ONBOARD
- #endif
|