My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.

pins_MINITRONICS.h 4.0KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Minitronics v1.0/1.1 pin assignments
  24. */
  25. /**
  26. * Rev B 2 JAN 2017
  27. *
  28. * Added pin definitions for M3, M4 & M5 spindle control commands
  29. *
  30. */
  31. #ifndef __AVR_ATmega1281__
  32. #error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
  33. #endif
  34. #if HOTENDS > 2 || E_STEPPERS > 2
  35. #error "Minitronics supports up to 2 hotends / E-steppers. Comment out this line to continue."
  36. #endif
  37. #define BOARD_NAME "Minitronics v1.0 / v1.1"
  38. #define LARGE_FLASH true
  39. //
  40. // Limit Switches
  41. //
  42. #define X_MIN_PIN 5
  43. #define X_MAX_PIN 2
  44. #define Y_MIN_PIN 2
  45. #define Y_MAX_PIN 15
  46. #define Z_MIN_PIN 6
  47. #define Z_MAX_PIN -1
  48. //
  49. // Steppers
  50. //
  51. #define X_STEP_PIN 48
  52. #define X_DIR_PIN 47
  53. #define X_ENABLE_PIN 49
  54. #define Y_STEP_PIN 39 // A6
  55. #define Y_DIR_PIN 40 // A0
  56. #define Y_ENABLE_PIN 38
  57. #define Z_STEP_PIN 42 // A2
  58. #define Z_DIR_PIN 43 // A6
  59. #define Z_ENABLE_PIN 41 // A1
  60. #define E0_STEP_PIN 45
  61. #define E0_DIR_PIN 44
  62. #define E0_ENABLE_PIN 27
  63. #define E1_STEP_PIN 36
  64. #define E1_DIR_PIN 35
  65. #define E1_ENABLE_PIN 37
  66. //
  67. // Temperature Sensors
  68. //
  69. #define TEMP_0_PIN 7 // Analog Input
  70. #define TEMP_1_PIN 6 // Analog Input
  71. #define TEMP_BED_PIN 6 // Analog Input
  72. //
  73. // Heaters / Fans
  74. //
  75. #define HEATER_0_PIN 7 // EXTRUDER 1
  76. #define HEATER_1_PIN 8 // EXTRUDER 2
  77. #define HEATER_BED_PIN 3 // BED
  78. #define FAN_PIN 9
  79. //
  80. // Misc. Functions
  81. //
  82. #define SDSS 16
  83. #define LED_PIN 46
  84. //
  85. // LCD / Controller
  86. //
  87. #define BEEPER_PIN -1
  88. #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
  89. #define LCD_PINS_RS 15 // CS chip select /SS chip slave select
  90. #define LCD_PINS_ENABLE 11 // SID (MOSI)
  91. #define LCD_PINS_D4 10 // SCK (CLK) clock
  92. #define BTN_EN1 18
  93. #define BTN_EN2 17
  94. #define BTN_ENC 25
  95. #define SD_DETECT_PIN 30
  96. #else
  97. #define LCD_PINS_RS -1
  98. #define LCD_PINS_ENABLE -1
  99. #define LCD_PINS_D4 -1
  100. #define LCD_PINS_D5 -1
  101. #define LCD_PINS_D6 -1
  102. #define LCD_PINS_D7 -1
  103. // Buttons are directly attached using keypad
  104. #define BTN_EN1 -1
  105. #define BTN_EN2 -1
  106. #define BTN_ENC -1
  107. #define SD_DETECT_PIN -1 // Minitronics doesn't use this
  108. #endif
  109. //
  110. // M3/M4/M5 - Spindle/Laser Control
  111. //
  112. #if ENABLED(SPINDLE_LASER_ENABLE) // assumes we're only doing CNC work (no 3D printing)
  113. #undef HEATER_BED_PIN
  114. #undef TEMP_BED_PIN // need to free up some pins but also need to
  115. #undef TEMP_0_PIN // re-assign them (to unused pins) because Marlin
  116. #undef TEMP_1_PIN // requires the presence of certain pins or else it
  117. #define HEATER_BED_PIN 4 // won't compile
  118. #define TEMP_BED_PIN 50
  119. #define TEMP_0_PIN 51
  120. #define SPINDLE_LASER_ENABLE_PIN 52 // using A6 because it already has a pull up on it
  121. #define SPINDLE_LASER_PWM_PIN 3 // WARNING - LED & resistor pull up to +12/+24V stepper voltage
  122. #define SPINDLE_DIR_PIN 53
  123. #endif