12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Test AVR-specific configuration values for errors at compile-time.
- */
-
- /**
- * Checks for FAST PWM
- */
- #if ENABLED(FAST_PWM_FAN) && (ENABLED(USE_OCR2A_AS_TOP) && defined(TCCR2))
- #error "USE_OCR2A_AS_TOP does not apply to devices with a single output TIMER2"
- #endif
-
- /**
- * Sanity checks for Spindle / Laser PWM
- */
- #if ENABLED(SPINDLE_LASER_PWM)
- #include "../ServoTimers.h" // Needed to check timer availability (_useTimer3)
- #if SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
- #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
- #elif NUM_SERVOS > 0 && defined(_useTimer3) && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
- #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
- #endif
- #elif defined(SPINDLE_LASER_FREQUENCY)
- #error "SPINDLE_LASER_FREQUENCY requires SPINDLE_LASER_PWM."
- #endif
-
- /**
- * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
- */
- #if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
- #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
- #endif
-
- #if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
- #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
- #endif
|