123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108 |
- /**
- * CartesioV12 pin assignments
- */
-
- #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
- #endif
-
- //#define LARGE_FLASH true
-
- #define X_ENABLE_PIN 26
- #define X_STEP_PIN 25
- #define X_DIR_PIN 27
- #define X_MIN_PIN 19
- #define X_MAX_PIN -1
-
- #define Y_ENABLE_PIN 29
- #define Y_STEP_PIN 28
- #define Y_DIR_PIN 30
- #define Y_MIN_PIN 22
- #define Y_MAX_PIN -1
-
- #define Z_ENABLE_PIN 32
- #define Z_STEP_PIN 31
- #define Z_DIR_PIN 33
- #define Z_MIN_PIN 23
- #define Z_MAX_PIN -1
-
-
- //Tools
-
- #define E0_ENABLE_PIN 58
- #define E0_STEP_PIN 57
- #define E0_DIR_PIN 55
- #define HEATER_0_PIN 11
- #define TEMP_0_PIN 0 // ANALOG INPUT !!
- // #define TOOL_0_PIN 56
- // #define TOOL_0_PWM_PIN 10 // used for red warning led at dual extruder
-
- #define E1_ENABLE_PIN 60
- #define E1_STEP_PIN 61
- #define E1_DIR_PIN 62
- #define HEATER_1_PIN 9
- #define TEMP_1_PIN 9 // 9 for tool3 -> 13 for chambertemp
- // #define TOOL_1_PIN 59
- // #define TOOL_1_PWM_PIN 8 // used for lights at dual extruder
-
- #define E2_ENABLE_PIN 44
- #define E2_STEP_PIN 46
- #define E2_DIR_PIN 66
- #define HEATER_2_PIN 6
- #define TEMP_2_PIN 13 // 10 for tool3 -> 13 for chambertemp
- // #define TOOL_2_PIN 4
- // #define TOOL_2_PWM_PIN 5
-
- #define E3_ENABLE_PIN 47
- #define E3_STEP_PIN 45
- #define E3_DIR_PIN 69
- #define HEATER_3_PIN 3
- #define TEMP_3_PIN 11 // 11 for tool4 -> 13 for chambertemp
- // #define TOOL_3_PIN 14
- // #define TOOL_3_PWM_PIN 2
-
- #define HEATER_BED_PIN 24
- #define TEMP_BED_PIN 14 // ANALOG INPUT !!
-
- //common I/O
-
- //#define TEMP_CHAMBER_PIN 13 // ANALOG INPUT !!
- #define FIL_RUNOUT_PIN 18
- //#define PWM_1_PIN 12
- //#define PWM_2_PIN 13
- //#define SPARE_IO 17
- #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
-
-
- //user interface
-
- #define BEEPER_PIN 16
-
- // Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 39
- #define DOGLCD_CS 35
- #define DOGLCD_MOSI 48
- #define DOGLCD_SCK 49
- #define LCD_SCREEN_ROT_180
-
- //The encoder and click button
- #define BTN_EN1 36
- #define BTN_EN2 34
- #define BTN_ENC 38 //the click switch
-
- //hardware buttons for manual movement of XYZ
- #define SHIFT_OUT 42
- #define SHIFT_LD 41
- #define SHIFT_CLK 40
-
-
- //#define UI1 43
- //#define UI2 37
-
-
- // Other
-
- #define SDSS 53
- #define SD_DETECT_PIN 15
- #define STAT_LED_BLUE -1
- #define STAT_LED_RED 10 // TOOL_0_PWM_PIN
|