123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Velleman K8800 (Vertex)
- */
-
- #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
- #endif
-
- #define BOARD_INFO_NAME "K8800"
- #define DEFAULT_MACHINE_NAME "Vertex Delta"
-
- //#define LCD_SCREEN_ROT_180
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 3
- #define Y_STOP_PIN 14
- #define Z_MIN_PIN 68 // Used for bed leveling
- #define Z_MAX_PIN 66
-
- //
- // Steppers
- //
- #define X_STEP_PIN 54
- #define X_DIR_PIN 55
- #define X_ENABLE_PIN 38
-
- #define Y_STEP_PIN 60
- #define Y_DIR_PIN 61
- #define Y_ENABLE_PIN 56
-
- #define Z_STEP_PIN 46
- #define Z_DIR_PIN 48
- #define Z_ENABLE_PIN 63
-
- #define E0_STEP_PIN 26
- #define E0_DIR_PIN 28
- #define E0_ENABLE_PIN 24
-
- #define E1_STEP_PIN 32
- #define E1_DIR_PIN 34
- #define E1_ENABLE_PIN 30
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 13
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 10
- #define FAN_PIN 8
- #define CONTROLLER_FAN_PIN 9
-
- //
- // Misc. Functions
- //
- #define SDSS 25
-
- #define FIL_RUNOUT_PIN 69 // PK7
- #define KILL_PIN 20 // PD1
-
- //
- // LCD / Controller
- //
- #define SD_DETECT_PIN 21 // PD0
- #define LCD_SDSS 53
- #define BEEPER_PIN 6
-
- #define DOGLCD_CS 29
- #define DOGLCD_A0 27
-
- #define LCD_PINS_RS 27
- #define LCD_PINS_ENABLE 29
- #define LCD_PINS_D4 37
- #define LCD_PINS_D5 35
- #define LCD_PINS_D6 33
- #define LCD_PINS_D7 31
-
- #if ENABLED(NEWPANEL)
- #define BTN_EN1 17
- #define BTN_EN2 16
- #define BTN_ENC 23
- #endif
|