123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- #include "../../inc/MarlinConfig.h"
-
- #if ENABLED(COOLANT_CONTROL)
-
- #include "../gcode.h"
- #include "../../module/planner.h"
-
- #if ENABLED(COOLANT_MIST)
- /**
- * M7: Mist Coolant On
- */
- void GcodeSuite::M7() {
- planner.synchronize(); // Wait for move to arrive
- WRITE(COOLANT_MIST_PIN, !(COOLANT_MIST_INVERT)); // Turn on Mist coolant
- }
- #endif
-
- #if ENABLED(COOLANT_FLOOD)
- /**
- * M8: Flood Coolant On
- */
- void GcodeSuite::M8() {
- planner.synchronize(); // Wait for move to arrive
- WRITE(COOLANT_FLOOD_PIN, !(COOLANT_FLOOD_INVERT)); // Turn on Flood coolant
- }
- #endif
-
- /**
- * M9: Coolant OFF
- */
- void GcodeSuite::M9() {
- planner.synchronize(); // Wait for move to arrive
- #if ENABLED(COOLANT_MIST)
- WRITE(COOLANT_MIST_PIN, COOLANT_MIST_INVERT); // Turn off Mist coolant
- #endif
- #if ENABLED(COOLANT_FLOOD)
- WRITE(COOLANT_FLOOD_PIN, COOLANT_FLOOD_INVERT); // Turn off Flood coolant
- #endif
- }
-
- #endif // COOLANT_CONTROL
|