| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- /**
- * Brainwave 1.0 pin assignments (AT90USB646)
- *
- * Requires hardware bundle for Arduino:
- * https://github.com/unrepentantgeek/brainwave-arduino
- */
-
- #ifndef __AVR_AT90USB646__
- #error "Oops! Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu."
- #endif
-
- #define BOARD_NAME "Brainwave"
-
- #define X_STEP_PIN 27
- #define X_DIR_PIN 29
- #define X_ENABLE_PIN 28
- #define X_STOP_PIN 7
- #define X_ATT_PIN 26
-
- #define Y_STEP_PIN 31
- #define Y_DIR_PIN 33
- #define Y_ENABLE_PIN 32
- #define Y_STOP_PIN 6
- #define Y_ATT_PIN 30
-
- #define Z_STEP_PIN 17
- #define Z_DIR_PIN 19
- #define Z_ENABLE_PIN 18
- #define Z_STOP_PIN 5
- #define Z_ATT_PIN 16
-
- #define E0_STEP_PIN 21
- #define E0_DIR_PIN 23
- #define E0_ENABLE_PIN 22
- #define E0_ATT_PIN 20
-
- #define HEATER_0_PIN 4 // Extruder
- #define HEATER_BED_PIN 38 // Bed
- #define FAN_PIN 3 // Fan
-
- #define TEMP_0_PIN 7 // Extruder / Analog pin numbering
- #define TEMP_BED_PIN 6 // Bed / Analog pin numbering
-
- #define LED_PIN 39
|
