My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

pins_MEGATRONICS.h 2.7KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * MegaTronics pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Megatronics"
  29. #define LARGE_FLASH true
  30. #define X_STEP_PIN 26
  31. #define X_DIR_PIN 28
  32. #define X_ENABLE_PIN 24
  33. #define X_MIN_PIN 41
  34. #define X_MAX_PIN 37
  35. #define Y_STEP_PIN 60 // A6
  36. #define Y_DIR_PIN 61 // A7
  37. #define Y_ENABLE_PIN 22
  38. #define Y_MIN_PIN 14
  39. #define Y_MAX_PIN 15
  40. #define Z_STEP_PIN 54 // A0
  41. #define Z_DIR_PIN 55 // A1
  42. #define Z_ENABLE_PIN 56 // A2
  43. #define Z_MIN_PIN 18
  44. #define Z_MAX_PIN 19
  45. #define E0_STEP_PIN 31
  46. #define E0_DIR_PIN 32
  47. #define E0_ENABLE_PIN 38
  48. #define E1_STEP_PIN 34
  49. #define E1_DIR_PIN 36
  50. #define E1_ENABLE_PIN 30
  51. #define SDSS 53
  52. #define LED_PIN 13
  53. #define FAN_PIN 7 // IO pin. Buffer needed
  54. #define PS_ON_PIN 12
  55. #define HEATER_0_PIN 9
  56. #define HEATER_1_PIN 8
  57. #define HEATER_BED_PIN 10 // BED
  58. #if TEMP_SENSOR_0 == -1
  59. #define TEMP_0_PIN 8 // ANALOG NUMBERING
  60. #else
  61. #define TEMP_0_PIN 13 // ANALOG NUMBERING
  62. #endif
  63. #define TEMP_1_PIN 15 // ANALOG NUMBERING
  64. #define TEMP_BED_PIN 14 // ANALOG NUMBERING
  65. // AUX-4
  66. #define BEEPER_PIN 33
  67. #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
  68. #define LCD_PINS_RS 16
  69. #define LCD_PINS_ENABLE 17
  70. #define LCD_PINS_D4 23
  71. #define LCD_PINS_D5 25
  72. #define LCD_PINS_D6 27
  73. #define LCD_PINS_D7 29
  74. // Buttons directly attached using AUX-2
  75. #define BTN_EN1 59
  76. #define BTN_EN2 64
  77. #define BTN_ENC 43
  78. #define SD_DETECT_PIN -1 // RAMPS doesn't use this
  79. #endif // ULTRA_LCD && NEWPANEL