My Marlin configs for Fabrikator Mini and CTC i3 Pro B
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

pins_MINITRONICS.h 2.7KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Minitronics v1.0/1.1 pin assignments
  24. */
  25. #ifndef __AVR_ATmega1281__
  26. #error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Minitronics v1.0 / v1.1"
  29. #define LARGE_FLASH true
  30. #define X_STEP_PIN 48
  31. #define X_DIR_PIN 47
  32. #define X_ENABLE_PIN 49
  33. #define X_MIN_PIN 5
  34. #define X_MAX_PIN 2
  35. #define Y_STEP_PIN 39 // A6
  36. #define Y_DIR_PIN 40 // A0
  37. #define Y_ENABLE_PIN 38
  38. #define Y_MIN_PIN 2
  39. #define Y_MAX_PIN 15
  40. #define Z_STEP_PIN 42 // A2
  41. #define Z_DIR_PIN 43 // A6
  42. #define Z_ENABLE_PIN 41 // A1
  43. #define Z_MIN_PIN 6
  44. #define Z_MAX_PIN -1
  45. #define E0_STEP_PIN 45
  46. #define E0_DIR_PIN 44
  47. #define E0_ENABLE_PIN 27
  48. #define E1_STEP_PIN 36
  49. #define E1_DIR_PIN 35
  50. #define E1_ENABLE_PIN 37
  51. #define E2_STEP_PIN -1
  52. #define E2_DIR_PIN -1
  53. #define E2_ENABLE_PIN -1
  54. #define SDSS 16
  55. #define LED_PIN 46
  56. #define FAN_PIN 9
  57. #define TEMP_0_PIN 7 // ANALOG NUMBERING
  58. #define TEMP_1_PIN 6 // ANALOG NUMBERING
  59. #define TEMP_BED_PIN 6 // ANALOG NUMBERING
  60. #define HEATER_0_PIN 7 // EXTRUDER 1
  61. #define HEATER_1_PIN 8 // EXTRUDER 2
  62. #define HEATER_BED_PIN 3 // BED
  63. /**
  64. * Controllers and LCDs
  65. */
  66. #define BEEPER_PIN -1
  67. #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
  68. #define LCD_PINS_RS 15 // CS chip select /SS chip slave select
  69. #define LCD_PINS_ENABLE 11 // SID (MOSI)
  70. #define LCD_PINS_D4 10 // SCK (CLK) clock
  71. #define BTN_EN1 18
  72. #define BTN_EN2 17
  73. #define BTN_ENC 25
  74. #define SD_DETECT_PIN 30
  75. #else
  76. #define LCD_PINS_RS -1
  77. #define LCD_PINS_ENABLE -1
  78. #define LCD_PINS_D4 -1
  79. #define LCD_PINS_D5 -1
  80. #define LCD_PINS_D6 -1
  81. #define LCD_PINS_D7 -1
  82. // Buttons are directly attached using keypad
  83. #define BTN_EN1 -1
  84. #define BTN_EN2 -1
  85. #define BTN_ENC -1
  86. #define SD_DETECT_PIN -1 // Minitronics doesn't use this
  87. #endif